WAP4410N and multiple SSIDs on different VLANs using RADIUS

I am trying to setup the above environment. When I connect on my guest network it does not give me an IP address from my guest network DHCP scope that is configured on my CISCO router.
Does anyone have any idea how to set this up???
Any help would be appreciated...

It is most likely (I'm not certain from the description) that
the 'sub-buttons' are a 'child' MC of the main button? if so, the
'on' handler for the 'main' button will override any handlers
attached to 'child' buttons within it. the only solution is to use
a hitTest method for either the 'parent' button or the 'child'
buttons, OR separate the two MCs and use the 'main' button to bring
a MC of the 'sub' buttons to the Stage.

Similar Messages

Send multiple files in different directories using Receiver File Adapter

Hi Experts,
I have one File to File without ESR scenario where I have to pick multiple files from different directories and to save them in different directories on receiver side.
Can anyne help me to send multiple files in different directories using receiver file adapter.
Is it possible??
Any help will be appreciated.
Regards,
Danish

hi ,
that is possiable without esr,
we need to create one sender communication channel , in that we nend to use "adavnced selection for source file " for sending multiple files from multiple directories.
we need to create 'n' receiver communication channels and 'n' receiver agreements based on communication channels .
in receiver determination, provide multiple receivers
In interface determination , provide * symbol for receiver communication components
thanks,

WLC 4400 and multiple authentication servers e.g. RADIUS, ACS

WLC 4400 and multiple authentication servers e.g. RADIUS, ACS
Can the WCL 4400 be set up to use multiple RADIUS servers? The user accounts for accessing wireless would use a RADIUS server. The administrative accounts for the WLC would reside on an ACS server.

Yes, that is correct. You can set acs to use both radius and tacacs.
For this you need to add WLC twice in acs-->network configuration. But you need to keep host name different.
eg 1) Host name WLC --->IP x.x.x.x -->Auth using -->radius
2) Host name WLC1--->IP x.x.x.x --->Auth using -->Tacacs.
You need to set up tacacs commands on WLC along with radius commands.
Regards,
~JG
Please rate helpful posts

1242AG Bridge, VLAN and Multiple SSIDs

I have two buildings that I'm trying to configure a bridge in between them using 2 1242AG APs.
Building A
PCOFFICE SSID on VLAN 200 Radio G
ROOT_1 SSID on Native VLAN 1 Radio A
Root Bridge
Building B
FDAPC SSID on Native VLAN 1 Radio G
ROOT_1 SSID on Native VLAN 1 Radio A
We are using directional antenna. I know they are lined up properly because I have them both down and in front of me. I'm getting an error on the Building B AP that says "
No SSID with VLAN configured. Dot11Radio1 not started." and I'm unable to get this to work. The bridge was working before I added the VLAN and encryption/WPA information for the PCOFFICE and FDAPC SSIDs
Any assistance would be amazing. Thanks! Please see attached files for configurations. I know the switch is configured properly because I had this working before and forgot to save the damn configuration off the devices. I'm not having to do it over from scratch.

That did not work.
I've managed to fix the ROOT_1 and FDAPC... now I'm having an issue where I can attempt to connect to the PCOFFICE SSID but I'm unable to get a DHCP address from the server.
Here is the config for the AP with PCOFFICE on it and the switch.
SWITCH
interface GigabitEthernet3/2
switchport trunk allowed vlan 1,200
switchport mode trunk
interface Vlan1
ip address 192.168.3.4 255.255.255.0
interface Vlan200
ip address 192.168.30.2 255.255.255.0
ip helper-address 192.168.3.98
ip default-network 192.168.3.0
ip route 0.0.0.0 0.0.0.0 192.168.3.1
no ip http server
ACCESS POINT
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname AP1_ROOT_AP
enable secret 5 REMOVED
ip subnet-zero
no aaa new-model
dot11 vlan-name VLAN1 vlan 1
dot11 vlan-name pcCopper vlan 200
dot11 ssid PCOFFICE
   vlan 200
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 REMOVED
dot11 ssid ROOT_1
   vlan 1
   authentication open
   authentication key-management wpa
   infrastructure-ssid optional
   wpa-psk ascii 7 REMOVED
dot11 network-map
dot11 arp-cache optional
power inline negotiation prestandard source
username Cisco password 7 REMOVED
username admin privilege 15 password 7 REMOVED
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
encryption vlan 200 mode ciphers tkip
ssid PCOFFICE
speed basic-2.0 5.5 11.0 12.0 18.0 24.0 36.0 48.0 54.0
no power client local
power client 17
power local cck 17
power local ofdm 17
channel 2462
station-role root access-point
antenna receive right
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 port-protected
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.200
encapsulation dot1Q 200
no ip route-cache
bridge-group 200
bridge-group 200 subscriber-loop-control
bridge-group 200 block-unknown-source
no bridge-group 200 source-learning
no bridge-group 200 unicast-flooding
bridge-group 200 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption mode ciphers tkip
encryption vlan 1 mode ciphers tkip
ssid ROOT_1
dfs band 3 block
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
no power client local
power client 11
power local 11
channel 5180
station-role root bridge
antenna receive right
antenna transmit right
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
hold-queue 160 in
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
interface FastEthernet0.200
encapsulation dot1Q 200
no ip route-cache
bridge-group 200
bridge-group 200 spanning-disabled
interface BVI1
ip address 192.168.3.241 255.255.255.0
no ip route-cache
ip default-gateway 192.168.3.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
control-plane
bridge 1 route ip
line con 0
line vty 0 4
login local

Can the RV180W have multiple SSIDs with different security configurations?

I am trying to configure the RV180W with a guest network and regular wireless network. The regular wireless network is just a bridge to the wired network, using WPA2-Pers for authentication. I built and enabled another wireless SSID, using a different VLAN and no authentication. I can get both SSIDs to function at the same time if I turn off security. Once I turn on Security, the regular one no longer functions.

It is actually all in the manual:
SEE: PDF MANUAL
Page 63 of PDF and onwards
Do note that you need to assign multiple VLAN per SSID. Check the manual it is there :D
and based on the manual you need to enable multiple VLAN support: See page 34 of the manual: Configuring Virtual LAN (VLAN) Membership
Don't forget to rate and mark as answer helpful posts! :)

Multiple SSID with different Login Web authority pages

Our current setup is one Anchor control and then several WLC’s, I want to know if I can have multiple SSID and use different Web Auth pages form them, so I can have a SSID that requires a password to Authentication access and another SSID that requires pass through Authentication but they would have different web authentication pages and go to different pages once Authenticated.
Is this possible to ?

Hi,
If you are running WLC software 4.2 and above then u can do this on per WLAN basis.. here is the link which tells on how to do it..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml#A1
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

Multiple files in different directory using single FILE adaptor

Hi Guys,
How can we handle multiple files having different format(PDF,TXT,EXCEL) and in different directory with the single FILE adaptor.
I know by using "." we ca get mutilple files, but here tthe files are of different format and in different directory.
Could you please explain as to how we can handle this scenarios?
Thanks
Sahil

Hi,
The short answer is - "No".
The Long Question - "Why do you want to use a SINGLE channel".
If your idea is to reuse the interface then dont worry... Except for the Senderchannel and Sender agreement all your other objects can be reused ...provided your sender apter converts the different files into the same XML format..
For TXT you can use the simple file adpater..
For excel see if you can use save the file as .CSV format...then you can use it directlky by the simple FIle adapter..
For PDF use conversion agent... Here a blog to get u started on that ->
/people/shabarish.vijayakumar/blog/2009/05/17/trouble-writing-out-a-pdf-in-xipi
regards
Arvind R

Multiple SSIDs: what firmware to use?

I have a WRT54GL, and I've heard some of those open-source firmwares allow you to create multiple SSIDs. I have some computers that use WPA, and one computer that uses WEP. So I'd like to be able to create one SSID for WPA clients, and another SSID for WEP clients. And also a third SSID for guests. What firmware will allow me to do that easily?

I am not sure that Open Source Firmware work properly or not .....

How to update multiple columns from different tables using cursor.

Hi,
i have two tables test1 and test2. i want to udpate the column(DEPT_DSCR) of both the tables TEST1 and TEST2 using select for update and current of...using cursor.
I have a code written as follows :
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
     LOOP
          FETCH C1 INTO v_mydept1,v_mydept2;
          EXIT WHEN C1%NOTFOUND;
          UPDATE TEST2 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
          UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
     END LOOP;
     COMMIT;
END;
The above code when run says that it runs successfully. But it does not updates the desired columns[DEPT_DSCR].
It only works when we want to update single or multiple columns of same table...i.e. by providing these columns after "FOR UPDATE OF"
I am not sure what is the exact problem when we want to update multiple columns of different tables.
Can anyone help me on this ?

oops my mistake.....typo mistake...it should have been as follows --
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
Now here is the upated PL/SQL code where we are trying to update columns of different tables --
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
LOOP
FETCH C1 INTO v_mydept1,v_mydept2;
EXIT WHEN C1%NOTFOUND;
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
END LOOP;
COMMIT;
END;
Please let us know why it is not updating by using using CURRENT OF

How to Query Multiple Fields from different Tables using Toplink Expression

Hi,
I am trying to prepare an Oracle Toplink Expression to qurey the multiple columns of different tables. the query as following. Please can anyone help?
SELECT CYCLE.CYCLE_ID,
CYCLE.ASPCUSTOMER_ID,
CYCLE.FACILITYHEADER_ID,
CYCLE.ADDUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME ADDUSERNAME,
CYCLE.ADDDATE,
CYCLE.LASTUPDATEUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME LASTUPDATEUSERNAME,
CYCLE.LASTUPDATEDATE,
CYCLE.CYCLENAME,
CYCLE.CYCLENUMBER,
CYCLE.DESCRIPTION
FROM CYCLE,ASPUSER ASP
WHERE CYCLE.ADDUSER = ASP.ASPUSER_ID
and then i want to send that expression to readAllObjects method as a parameter
Expression exp = (..............this is the required qurey expression...................)
Vector employees = session.readAllObjects(getClass(), exp);
thanks,

You havent given any information on the mapping between Cycle and Asp. I presume there is a one to one mapping between them. Also it appears there is no "WHERE" clause to limit the number of cycles being retrieved. If that is the case then I presume you want to load all cycles in the system.
Thats just a clientSession.readAllObjects(Cycle.class). If you have indirection turned on the Asp should get loaded when you do a cycle.getAsp().
I presume that SQL you posted loads all the columns of CYCLE and ASP. If you are interested in a subset of CYCLE or ASP then you should do a ReportQuery or partial object read.
Hi,
I am trying to prepare an Oracle Toplink Expression
to qurey the multiple columns of different tables.
the query as following. Please can anyone help?
SELECT CYCLE.CYCLE_ID,
CYCLE.ASPCUSTOMER_ID,
CYCLE.FACILITYHEADER_ID,
CYCLE.ADDUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME ADDUSERNAME,
CYCLE.ADDDATE,
CYCLE.LASTUPDATEUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME
LASTUPDATEUSERNAME,
CYCLE.LASTUPDATEDATE,
CYCLE.CYCLENAME,
CYCLE.CYCLENUMBER,
CYCLE.DESCRIPTION
FROM CYCLE,ASPUSER ASP
WHERE CYCLE.ADDUSER = ASP.ASPUSER_ID
and then i want to send that expression to
readAllObjects method as a parameter
Expression exp = (..............this is the required
qurey expression...................)
Vector employees = session.readAllObjects(getClass(),
exp);
thanks,

1841 with HWIC-AP multiple SSIDs to different subnets

Hi experts,
Please point me toward the right direction, how do I do this setup? Please give me some example? Is this different L3 BVIs along with sub interfaces on dot11radio interface assigned to different bridge-groups?
Thanks a lot.
Regards,
GP

Hi again,
I have managed to make it work. Just in case someone needs the same configuration within a singe Cisco1841 router.
Thanks.
dot11 ssid cisco
vlan 10
authentication open
authentication key-management wpa
wpa-psk ascii 7 05080F1C22434D000A0618
dot11 ssid cisco-guest
vlan 100
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 1511021F0725282D3B303A
bridge irb
interface Dot11Radio0/0/0
no ip address
encryption mode ciphers aes-ccm
encryption vlan 10 mode ciphers aes-ccm
encryption vlan 100 mode ciphers aes-ccm
ssid cisco
ssid cisco-guest
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root access-point
interface Dot11Radio0/0/0.10
encapsulation dot1Q 10
no cdp enable
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
interface Dot11Radio0/0/0.100
encapsulation dot1Q 100
no cdp enable
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface BVI10
ip address 10.0.0.1 255.255.255.0
interface BVI100
ip address 10.1.1.1 255.255.255.0
bridge 10 route ip
bridge 100 route ip

Configure WAP4410N with Multiple SSIDS

I need to configure a WAP4410N for use on a small, very simple business network. There should be a corporate WLAN and a guest WLAN. The corporate WLAN should allow anyone connectd to it to access resources on the domain.
In front of the WAP is a cable modem/router and a basic Level 2 (web managed) switch. What do i have to do to segregate the corporate and guest networks.
I thought I would add the corporate WLAN to VLAN1 (assuming the default VLAN in the switch is VLAN1). Then I figured I could create the guest WLAN and assign it to VLAN2 which which will be controlled entirely by the 4410N (DHCP, DNS, etc.) Does this sound like the right way of going about things?
If not, can you please point me in th right direction?
Thank you,

That's right.If you are going to create a guest wireless network, or any additional SSIDs for that matter, you'll also need to create an additional vlan for the guest network. I've pasted below the 4 steps from the WAP4410N manual, and then as a final step you'll also need to configure vlans on your switch so that traffic on the guest wlan will be allowed a path on your network.
STEP 1
Click Wireless > VLAN & QoS.
STEP 2
To configure VLAN settings:
NOTE You can enable this feature only if the hubs/switches on your network
support the VLAN standard.
a. To enable VLAN, click Enabled.
b. Provide the following information:
• Default VLAN ID—Enter the default VLAN ID.
• VLAN Tag—Select Tagged to determine the associated VLAN from the
VLAN tag. The default is Untagged.
• AP Management VLAN—Specify the VLAN ID used for management.
• VLAN Tag over WDS—Select Enabled or Disabled as required.
STEP 3
To configure the QoS settings, enter the following information:
• VLAN ID—Enter the ID to assign to the VLAN.
• Priority—Select a priority from the list.
• WMM—To enable WMM, check the corresponding check box.
Wi-Fi Multimedia is a QoS feature defined by WiFi Alliance before IEEE
802.11e was finalized. Now it is part of IEEE 802.11e. When it is enabled, it
provides four priority queues for different types of traffic. It automatically
maps the incoming packets to the appropriate queues based on QoS
settings (in IP or layer 2 header). WMM provides the capability to prioritize
traffic in your environment. The default is Enabled.
STEP 4
Click Save.
STEP 5
Configuration on a Switch running IOS
apply the following to the interface that the WAP4410N is connected to:
en
conf t
int
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk native vlan 1
switchport trunk allowed vlan 1,
end
*you'll also need to configure any interfaces that packets from the guest wlan will traverse, if you intend to permit guest traffic over them.

How to read multiple files of different name using single file adapter

There are two inbound locations inbound1 and inbound2 , and the files structure present in these two inbound locations are same but the files start with different names example
(1)files in inbound1 starts with file1,file2...
(2)files in inbound2 starts with abc1,abc2...
by using same file adapter with read option how can i read both files....

Hi K.A.N.N.,
You can define multiple directories using the above link in 11g and poll for the file as \*.*.
Alternatively you can use the Synchronous Read and specify the file name at runtime.
You can also use Pick activity to define multiple branches each with a File Adapter to read from a specified location with specified file name. Although it would contain multiple Adapter Definitions at Development-time, only one of the Adapters will execute at Run-Time.
Regards,
Neeraj Sehgal

How to use one iPad on multiple computers on different networks using one AppleID

Hi everybody.
I'm living in two places, 250 km distant, both equiped with PCs, one running Windows 7 and the other Windows XP. They run last version of iTunes ans I use the same Apple Id.
As one is the backup of the other, both have all the videos I'd like to broadcast on may iPad (not enough place, so no download). Some of them are TV shows I bought from iTunes, other one are personnal videos.
All was perfect on the first PC (the one running Windows 7) until I activate the same setups on the second one. Now all is fine on that PC, but home sharing on the first one doesn't work anymore. When I open Videos (the application) on iPad, the only thing I see on the menu is "TV show", wich allow me to download the TV shows I bought. I guess they are donwloaded from Internet, not from the computer running iTunes on the local network. And I don't see anymore the "shared" menu I saw before that allow me to broascast personnal videos.
The Apple support say that what I'd like to do is not supported yet, but I'm not shure they really understand my configuration.
Does anybody use successfully the same configuration, or did someone encounter the same problem ?
Thank's

I do not understand the qestion. When you get a CC subscription you get it for specific software... or you can get a plan that covers multiple applications.

Problem with multiple requests to different servers using HTTPService

Hi
I'm aware that we are limited to two concurrent connections to a single host, so I'm looking into using either subdomains pointing to the same server, or separate physical servers to process multiple requests side-by-side.
However, whichever way I try to send three requests, looking at the Network Monitor the 3rd request always waits until one of the first two has finished. In the screenshot below, all three requests were sent at the same time to three separate physical servers, yet the top request didn't start until the bottom request finished, at 15:33:28
Any ideas how to get round this? I'm using SSL, but I've also tested it on HTTP with the same results. I'm writing an AIR app, and posted this on the AIR forum but was told it was a Flex issue and I should post it here.
Please let me know if any more information is needed
Many thanks
James

Would that still apply even though I'm not running this inside a browser, but in AIR?
I've seen this method recommended by other people, and also the following page seems to suggest that what I'm doing should work
http://www.chadupton.com/blog/2008/08/maximum-concurrent-http-requests-from-adobe-air/
Kind regards
James

WAP4410N and multiple SSIDs on different VLANs using RADIUS

Similar Messages

Maybe you are looking for