Multiple Value Button to be closer on the Selection Screen

I have code for selection screen like this:
tables: mara, konv.
select-options s_matnr for mara-matnr.
select-options s_kschl for konv-kschl no intervals.
it gives the selection screen with multiple value button of s_kschl with more space.
Can anyone suggest me how to bring the multiple value button of s_kschl very close to its s_kschl-Low input field.
It's very urgent: please tell me and get rewards.

Hi,
Try to use the below code.
Selection-screen begin of line.
select-options s_matnr for mara-matnr.
select-options s_kschl for konv-kschl no intervals.
selection-screen end of line.
or else..
try to use the POSITION Commnad on the screen.
Click the link below to know more about it.
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba7e235c111d1829f0000e829fbfe/content.htm
Regards,
Vara

Similar Messages

Maintaing a default value for a particular field in the selection screen

Hi all,
How to maintain a default value for a particular field in the Selection Screen of a Standard report
Regards
Ajay

>
ajay babu wrote:
> Hi all,
>
> How to maintain a default value for a particular field in the Selection Screen of a Standard report
>
> Regards
> Ajay
Create a variant for your standard program and assign this variant to the field 'Start with variant' while creating transaction code for the standard program in the transaction 'SE93'.
Regards
Rajesh.

Push buttons are not triggering on the selection screen

selection-screen begin of block a with frame title text-001.
selection-screen skip.
parameters:z like vbap-vbeln.
selection-screen skip.
selection-screen begin of block b with frame title text-002.
selection-screen skip.
parameters:sales radiobutton group g default 'X',
 trans radiobutton group g.
selection-screen end of block b.
selection-screen skip.
selection-screen pushbutton 10(12) pu_text user-command CANC.
selection-screen pushbutton 30(12) qu_text user-command STAT.
selection-screen end of block a.
Initialization.
pu_text = 'Cancel Order'.
qu_text = 'Status'.
TABLES SSCRFIELDS.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'CANC'.
WRITE 'CANCEL'.
WHEN 'STAT'.
WRITE 'STATUS'.
ENDCASE.

hi,
in your program declare SSCRFIELDS table before defining selection-screen with push-buttons.
To create a pushbutton on the selection screen, you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
 USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
follow this sample program.
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
 BEGIN OF LINE,
 PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
 PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
 END OF LINE,
 BEGIN OF LINE,
 PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
 PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
 END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
 WHEN 'CLI1'.
 FLAG = '1'.
 WHEN 'CLI2'.
 FLAG = '2'.
 WHEN 'CLI3'.
 FLAG = '3'.
 WHEN 'CLI4'.
 FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
 WHEN '1'.
 WRITE / 'Button 1 was clicked'.
 WHEN '2'.
 WRITE / 'Button 2 was clicked'.
 WHEN '3'.
 WRITE / 'Button 3 was clicked'.
 WHEN '4'.
 WRITE / 'Button 4 was clicked'.
 WHEN OTHERS.
 WRITE / 'No Button was clicked'.
ENDCASE.
regards,
Ashok Reddy

Restrict filter values that are shown in the selection screen

Hi Experts
1) Is it possible to restrict the filter values that are shown in the selection screen in BEx web? When a user are asked to enter a material number and uses the selection button in BEx web, he should only see material numbers for one specific plant. How is this done?
2) Is it possible to remove the selection button for å characteristic filter in the selection screen in BEx web? The selection button I am talking about is the button to the right of where you enter the filter value (two white papers on top of each other). If there is no solution for question 1 we have to go for question 2 solution.
We are using BI 04s, SP 09.
Kind regards
Erik

Hi Erik,
It seems that you would like the user to see value for 1 single plant. If the Plant Value is fixed then you can use this value in the Query and hardcode it.> in the query go to the Plant Chrac and keep a constant value of the Plant.
How ever if you need this value to be dynamic then use a variable for customer exit and populate this value using ABAP.
Regards,
Jasprit

The selection screen cannot choose the multiple values at first instance?

Hi All,
 I have 2 select-options on the selection screen as follows>>
SELECT-OPTIONS :
 s_subusr FOR pa0105-usrid NO INTERVALS OBLIGATORY,
 s_period FOR vbak-erdat NO-EXTENSION OBLIGATORY.
When I try to enter multiple values by clicking the multiple option button when noting is entered as input on the selection screen.I get a error"Make entry in all required fields".
But when I enter a value on the selection screen input for s_subusr and then enter value in s_period and then click on multiple option button I am able to see the multi-option Popup.Now I can enter multiple Values.
Please can anyone help me to enter the values on the multiple option Pop-up whenever the user want?
Regards,
Shashank.

HI
OBLIGATORY means you have to enter the values , with out filling that values and if you click any thing it will show an error message saying that fill alla required fields
so if you want you can remove that
or if you want to keep that OBLIGATORY then fill some values 1st in that select-options and clcik on multiple entries button then it won't show any error
Reward if usefull

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

Changing of default values on the selection screen dynamically

Hi,
      I have 2 radiobuttons R_A & R_B and i have one text field like P_TEXT. Based on selection of radio button i have to change the default values in P_TEXT on the selection screen. like if i select R_A i have to display P_TEXT = 'A'. if i select R_B then it has to display P_TEXT = 'B'. I tried like as below
in AT SELECTION-SCREEN OUPUT EVENT.
             IF R_A = 'X'
               P_TEXT = 'A'.
             ELSEIF R_B= 'B'.
               P_TEXT = 'B'.
             ENDIF.
        But it's not working. it is working only for first radio button. when i select second radio button it is not giving the second value. can any one tell the sol.
Tks in advance.

Hi Pammi,
Use this code, its working:-
PARAMETERS : r_a RADIOBUTTON GROUP gp1 DEFAULT 'X' USER-COMMAND rb,
             r_b RADIOBUTTON GROUP gp1,
             p_text(20).
"we use user command with the radiobutton so that some event is occured in order to call AT SELECTION-SCREEN OUTPUT.
AT SELECTION-SCREEN OUTPUT.
IF r_a = 'X'.
    p_text = 'Hello'.
ELSEIF r_b = 'X'.
    p_text = 'Hi'.
ENDIF.
In the above case 'AT SELECTION-SCREEN OUTPUT' will act as PBO of the selection screen and will change value of selection text as per condition.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

How to pass value from the Z Report to the selection screen of the std rep

Dear Experts,
i have developed a report and the values are maintained only in internal table based on some condition. When I execute the report, for example MM60, there is a material number field for multiple selection.
the report should call the standard transaction and pass the values from the internal table to the multiple selection- material number of the standard transaction.
the standard transaction should never get executed automatically. Only the value should get passed from internal table to the standard t code. Please help.
regards,
Shankar

Hai
Go through the following Documents
SUBMIT rep.
Additions
1. ... LINE-SIZE col
2. ... LINE-COUNT lin
3. ... TO SAP-SPOOL
4. ... VIA SELECTION-SCREEN
5. ... AND RETURN
6. ... EXPORTING LIST TO MEMORY
7. ... USER user VIA JOB job NUMBER n
8. ... Various additions for parameter transfer to rep
9. ... USING SELECTION-SETS OF PROGRAM prog
Effect
Calls the report rep . Leaves the active program and starts the new report rep .
Addition 1
... LINE-SIZE col
Effect
Prints the report with the line width col .
Addition 2
... LINE-COUNT lin
Effect
Prints the report with lin lines (per page).
Addition 4
... VIA SELECTION-SCREEN
Effect
Displays the selection screen for the user. In this case, the selection screen is redisplayed after return from the report list display - the user's entries are retained.
Addition 5
... AND RETURN
Effect
Returns to the calling transaction or program after the called program has been executed. SUBMIT ... AND RETURN creates a new internal mode .
Addition 6
... EXPORTING LIST TO MEMORY
Effect
Does not display the output list of the called report, but saves it in SAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. You can read the saved list from SAP memory with the function module 'LIST_FROM_MEMORY' and then (for example) store it in the database with EXPORT . You can process this list further with the function modules 'WRITE_LIST' , 'DISPLAY_LIST' ... of the function group "SLST" .
Addition 7
... USER user VIA JOB job NUMBER n
Effect
Schedules the specified report in the job specified by the job name job and the job number n . The job runs under the user name user and you can omit the addition USER user . The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT . This addition can only be used with the addition ...AND RETURN .
Note
When scheduling a report with the SUBMIT ... VIA JOB job NUMBER n statement, you should always use the addition ...TO SAP-SPOOL to pass print and/or archive parameters. Otherwise, default values are used to generate the list and this disturbs operations in a production environment.
Addition 9
... USING SELECTION-SETS OF PROGRAM prog
Effect
Uses variants of the program prog when executing the program rep .
Note
Important
The programs prog and rep must have the same SELECT-OPTIONS and PARAMETER s. Otherwise, variants of the program prog may be destroyed.
Note
When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari . On the other hand, all variant-related actions on the selection screen of rep (Get , Save as variant , Display , Delete ) refer to the variants of prog .
Example
SUBMIT REPORT01
VIA SELECTION-SCREEN
USING SELECTION-SET 'VARIANT1'
USING SELECTION-SETS OF PROGRAM 'REPORT00'
AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00 .
Note
Runtime errors
LOAD_PROGRAM_NOT_FOUND : The specified program was not found.
SUBMIT_WRONG_TYPE : The specified program is not a report.
SUBMIT_IMPORT_ONLY_PARAMETER : Only one value passed to a report parameter.
SUBMIT_WRONG_SIGN : Invalid value passed to a selection with the addition SIGN .
SUBMIT_IN_ITAB_ILL_STRUCTURE : Table passed to a selection with WITH sel IN itab had an unexpected structure.
Try with this Example
Data: listobject like abaplist occurs 1 with header line.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1 .
IF sy-subrc <> 0.
message ID '61' TYPE 'E' NUMBER '731'
with 'LIST_FROM_MEMORY'.
ENDIF.
Thanks & regards
Sreenivasulu P

Select option values disappearing from the Selection screen

Dear experts
I have a selection screen in a report which has push button in the Application toolbar . When I press the button in the application toolbar it should get the count of the output just like in se16 and display it as message.
I have added the button and I am processing the same in the AT-SELECTION_SCREEN event
ie
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'FC01'.
PERFORM get_query_count.
ENDIF.
FORM get_query_count .
CREATE OBJECT g_model.
l_query_count = g_model->get_query_count(
MESSAGE s078 WITH l_query_count .
ENDFORM.
Here the problem is I am getting the message but the selection screen values are disappearing after the same .Now the strange thing I just hardcoded the l_query_count without going in to the class method , but then the selection screen values are not disaapearing?
Is there any limitation for using classes at AT SELECTION SCREEN event

Hi,
Try to write changing in perform.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'FC01'.
*PERFORM get_query_count changing p_count.*
ENDIF.
*FORM get_query_count changing l_query_count .*
CREATE OBJECT g_model.
l_query_count = g_model->get_query_count(
MESSAGE s078 WITH l_query_count .
ENDFORM.
Regards,
Srini.

Displaying Variables values with Text also in the selection screen of repor

hai
I have one InfoObject ZPLANT .When i try to excute the report then im getting only the Values of ZPLANT(not Text of those values) .Like below
ZPLANT :-
101 -
(im getting like this)
101 London Plant ( i want like this ,when i try to excute the report).
Please tell me how to do .
rizwan

Yes kamaljeet ,
When we press F4 , then we will gwt some values .
I want those values with description also ..
Pls tell me how can i get those F4 values with text in the selection screen of report .
i ll assing the points
rizwan

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to find out the selection screen values

Hi All,
in BI we are having the maximum allowed cells as 500000 for a report.
for some of the reports execution fetching the data morethan 500000 by different users.
i could findout the report and user who has executed, But i wanted to findout for which selection user has executed.
is it possible to find out...please help.
Thanks,
Krishna.

Hi,,
Yes it is possible.
Open your query result in the design mode by going to BEx Analyzer->Design ToolBar
Now take one text element and assign it to the variable which you have used for the selection screen.
Take the same number of text element as there are in selection screen.
Exit the design mode. In place of the text element you will find the value of the variables assigned to them.

Reg the selection screen value request

i am writing this code for getting corresponding material no for the plant which i giving in the selection-screen .
parameter : WERKS type marc-werks,
 matnr type marc-matnr.
data : begin of itab occurs 0,
 matnr like marc-matnr,
 werks like marc-werks,
 end of itab.
at selection-screen on value-request for werks.
select matnr werks from marc up to 10 rows into table itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
 RETFIELD = 'WERKS'
PVALKEY = ' '
 DYNPPROG = sy-cprog
 DYNPNR = sy-dynnr
 DYNPROFIELD = 'WERKS'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
 VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
 VALUE_TAB = itab
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
pls help

Hi Check this ...
Its working.....
PARAMETER : werks TYPE marc-werks,
matnr TYPE marc-matnr.
DATA : BEGIN OF itab OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
END OF itab.
DATA: dynfields TYPE TABLE OF dynpread WITH HEADER LINE.
DATA: return TYPE TABLE OF ddshretval WITH HEADER LINE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR werks.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'T001W'
 fieldname = 'WERKS'
 dynpprog = sy-cprog
 dynpnr = sy-dynnr
 dynprofield = 'WERKS'
 TABLES
 return_tab = return
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
REFRESH dynfields.
READ TABLE return WITH KEY fieldname = 'WERKS'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR matnr.
SELECT matnr werks FROM marc
INTO TABLE itab
WHERE werks EQ return-fieldval.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'MATNR'
PVALKEY = ' '
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'MATNR'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = itab
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3 .
IF sy-subrc NE 0.
ENDIF.
Regards,
Sai Ramesh

Retrieve input values from the selection screen

I have a requirement to retrieve the variable value or values inputed from the selection screen and label the worksheet tab to replace the tab name 'Sheet1' from the Excel. The only way to do this would be to write a macro to label the sheets but how would I retrieve the value(s) from the selection screen criteria? Is the value of the selection screen entered by the user stored in some table? How would I write the macro to retrieve this value?
For example, I want to retrieve the company code entered from the selection screen and lets say the company code entered as 10; I would want to replace the worksheet from 'Sheet1' to '10' . Texts would be more recognizable.

Use the option Layout->Display Text Elements->Variables from the BEx toolbar. This will display Variable screen user input on your workbook in a fixed location. Then you can use your macro to name the worksheet with the cell reference.
Thanks
Vineet

Field in the selection screen as a select option with two default values

Hi All,
can anybody tell me how to put field in the selection screen with two defaul values.
for ex: selection screen the Account Group KNA1-KTOKD as a select option. The defeault value should be Y001 and Y005.
please reply ASAP. Its urgent.
Thanks in advance,
Madhu

Hi Madhu,
Since Select options are nothing but ranges, you can use the following code to add two distinct values to the select options by default.
s_ktokd-sign = 'I'.
s_ktokd-option = 'EQ'.
s_ktokd-low = 'Y001'.
append s_ktokd.
s_ktokd-low = 'Y005'.
append s_ktokd.
clear s_ktokd.
However, if you want to mention a range like all the values between these given two values to be considered then u may use,
select-options : s_ktokd for KNA1-KTOKD default 'Y001' to 'Y005'.
or
s_ktokd-sign = 'I'.
s_ktokd-option = 'BT'.
s_ktokd-low = 'Y001'.
s_ktokd-high = 'Y005'.
append s_ktokd.
Reward if helpful.

Multiple Value Button to be closer on the Selection Screen

Similar Messages

Maybe you are looking for