Multiple values for a single-id

Hi,
In one of my requirement, I need to create new columns like, employee and sales representative.
Definition for employee is--case when usage.type='EM' then contact.last_nm
sales repr is--case when usage.type='SR' then contact.last_nm
The type is in usage table and last_nm is in contact table.
Here, the issue is, for every usage-id in usage table, there are chances of having multiple types. example, usage-id 11122--have usage type 'EM' and "SR'. In that case usage -id is double counting.
So for usage-id 11122 --we need to check for type=EM then employee....again it should not count "SR"
When I did as mentioned above, the usage -id is double counting.Please help me how to implement this in RPD? In SQL to implement the above req, I have written,
select usage-id where usage type=SR and usage-id not in(select usage-id where usage type=EM)
Thanks
SR

Hi SR,
Can you post the star schema details and the join condition between the 2 tables in question?
Also, did you mean that when the usage table has an entry for Employee, then that usage_id should not be considered for identifying a Sales Rep?
Thanks,
Gaurav

Similar Messages

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, <b>but its not a range which has two fields</b> . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

How to get Multiple Values for a single Variable in BPS.......

Hi Gurus:
I have a layout for planning, where I can plan for 5 days of the week. I also have a day column (yesterday) where I have the actual values. Users want to edit/foecast the next 5 days values. I am using a Variable to get the Date column which uses the System Date. However, since I am getting just one date in the Function Module (Code given below), the remaining days are greyed out and I can not enter the forecast values. I would like the same variable to get a series of dates in the same function module. What changes do I nee dto make in the ABAP code so that the remaining columns (Date) becaoe available for editing??
The FM code I have to get "Today's Date" is as follows:
FUNCTION ZCSHFL_GET_TODAY.
""Local Interface:
*" IMPORTING
*" REFERENCE(I_AREA) TYPE UPC_VAR-AREA
*" REFERENCE(I_VARIABLE) TYPE UPC_Y_VARIABLE
*" REFERENCE(I_CHANM) TYPE UPC_Y_CHANM
*" REFERENCE(ITO_CHANM) TYPE UPC_YTO_CHA
*" EXPORTING
*" REFERENCE(ETO_CHARSEL) TYPE UPC_YTO_CHARSEL
data: ls_charsel type upc_ys_charsel.
ls_charsel-seqno = 1.
ls_charsel-sign = 'I'.
ls_charsel-opt = 'EQ'.
ls_charsel-CHANM = I_chanm.
ls_charsel-low = sy-datum.
insert ls_Charsel into table eto_charsel.
ENDFUNCTION.
I want to get the Yestarday's Date as weel as dates for next 4 days from Today for this variable which are being used in the layout. Can anyone suggest the code tor this please.
Thanks very much in advance......
Best.... ShruMaa

Hi,
What I understand you need to return those dates from function module using parameter ETO_CHARSEL , right? If so just use this code:
ls_charsel-seqno = 1.
ls_charsel-sign = 'I'.
ls_charsel-opt = 'BT'. "we are giving ranges, so days between...
ls_charsel-CHANM = I_chanm.
ls_charsel-low = sy-datum - 1. "...first day is yesterday
ls_charsel-high = sy-datum + 4. "...and last day is 4 days from today
insert ls_Charsel into table eto_charsel.
This way you provide 5 days starting from yesterday till 4 days from today.
Regards
Marcin

Multiple values for single field

hi
In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record

Hi,
It is generally taken care using BDC's by Table Control, and if you are using BAPI's then there are tables for ITEMS.
Regards,
Atish

Entering mulitple values for a single user parameter

Hello,
Can anyone explain to me how to allow multiple values for a single parameter?
For example, say I want to allow the report to display a list of employees based on their employee id. I want to allow the user to enter mulitple
employee id's into a single field to get their report. SO the user would enter "241, 459, 832" to return the list of those 3 employees. I have the SQL set up below, but obviously I need to set up something different to break it out into 3 separate values. Any help would be greatly appreciated!
SELECT * FROM EMPLOYEE
WHERE EMPLOYEE_ID IN (:P_EMP_ID)

Hi,
Another way to do this is to use the lexical parameter, but then you have to create the parameter form in Forms. Your SQL would look like this for example:
select * from emp where empno is not null &empno
where &empno is a lexical parameter.
Then on your parameter form you would have a text field F_empid, say 200 character long, allowing the user to enter multiple values separated by a ",".
Then in the trigger that calls the report you would create a parameter list, and a variable that holds the values read from the form, this variable is where you define the value to be passed to the report's lexical parameter. For example:
declare
v_empid varchar2(200); (consistent with the length of the lexical parameter in the report).
begin
v_empid:='and empno in ('||F_empid||')';
then you pass v_empid to &empno in the call to the report.
This method works well. Good luck.

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

How to place multiple characteristic values for a single Report line

hi friends,
      I want to display a report with multiple characteristc values in different columns for each instance, For example there are 2 instances and they have multiple characteristics , so all characteristics of each instance should be displayed in multiple columns in one by one in the same row.
Thanks in advance.
RK
Message was edited by:
        RK

Hi RK,
    Try this it may help you for multiple values for one instance....
*Type-pools
TYPE-POOLS: slis.
Data declarations.
DATA: BEGIN OF t_vbak OCCURS 0,
vbeln TYPE vbeln,
bstnk TYPE vbak-bstnk,
erdat TYPE vbak-erdat,
kunnr TYPE vbak-kunnr,
END OF t_vbak.
DATA: BEGIN OF t_vbap OCCURS 0,
vbeln TYPE vbeln,
matnr TYPE vbap-matnr,
netpr TYPE vbap-netpr,
waerk TYPE vbap-waerk,
kwmeng TYPE vbap-kwmeng,
meins TYPE vbap-meins,
END OF t_vbap.
DATA: t_fieldcatalog1 TYPE slis_t_fieldcat_alv.
DATA: t_fieldcatalog2 TYPE slis_t_fieldcat_alv.
DATA: v_repid TYPE syrepid.
DATA: s_layout TYPE slis_layout_alv.
DATA: v_tabname TYPE slis_tabname.
DATA: t_events TYPE slis_t_event.
start-of-selection event.
START-OF-SELECTION.
v_repid = sy-repid.
Get the fieldcatalog for the first block
PERFORM get_fieldcat1 CHANGING t_fieldcatalog1.
Get the fieldcatalog for the second block
PERFORM get_fieldcat2 CHANGING t_fieldcatalog2.
Get the data for the first block
SELECT vbeln bstnk erdat kunnr UP TO 10 ROWS
INTO TABLE t_vbak
FROM vbak WHERE vbeln > '0060000100'.
Get the data for the second block
SELECT vbeln matnr netpr waerk kwmeng meins UP TO 10
ROWS
INTO TABLE t_vbap
FROM vbap WHERE vbeln > '0060000100'.
init
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = v_repid.
First block
v_tabname = 'ITAB1'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = s_layout
it_fieldcat = t_fieldcatalog1
i_tabname = v_tabname
it_events = t_events
TABLES
t_outtab = t_vbak.
Second block
v_tabname = 'ITAB2'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = s_layout
it_fieldcat = t_fieldcatalog2
i_tabname = v_tabname
it_events = t_events
TABLES
t_outtab = t_vbap.
*Display
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
FORM GET_FIELDCAT1
Get the field catalog for the first block
FORM get_fieldcat1 CHANGING lt_fieldcatalog TYPE
slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
Order number
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'T_VBAK'.
s_fieldcatalog-ref_tabname = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'VBELN'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Customer purchase order.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'BSTNK'.
s_fieldcatalog-tabname = 'T_VBAK'.
s_fieldcatalog-ref_tabname = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'BSTNK'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Creation date.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'ERDAT'.
s_fieldcatalog-tabname = 'T_VBAK'.
s_fieldcatalog-ref_tabname = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'ERDAT'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Customer
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'KUNNR'.
s_fieldcatalog-tabname = 'T_VBAK'.
s_fieldcatalog-ref_tabname = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'KUNNR'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
ENDFORM.
FORM GET_FIELDCAT2
Get the field catalog for the second block
FORM get_fieldcat2 CHANGING lt_fieldcatalog TYPE
slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
Order number
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'VBELN'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Material number
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'MATNR'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Net price
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'NETPR'.
s_fieldcatalog-cfieldname = 'WAERK'.
s_fieldcatalog-ctabname = 'T_VBAP'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Currency.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'WAERK'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'WAERK'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Quantity
s_fieldcatalog-col_pos = '5'.
s_fieldcatalog-fieldname = 'KWMENG'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'KWMENG'.
s_fieldcatalog-qfieldname = 'MEINS'.
s_fieldcatalog-qtabname = 'T_VBAP'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
UOM
s_fieldcatalog-col_pos = '6'.
s_fieldcatalog-fieldname = 'MEINS'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'MEINS'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
ENDFORM.
Plz Reward points if contents are useful,,,
Regards,
Mandeep.

Multiple values in a single cell in report !!

Hello,
I want to display multiple values in a single cell, each value separated by comma.
Ex: I have Employee and Department.
If a employee works for many departments, all the Department names should be displayed in the same cell in the report.
Please help !

Thanks for your replies !
Is there any other way to achieve this ?
There is 1 InfoObject which has 2 fields Employee and Department.
Employee     Department
001                A
001                B
001                C
In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
Can this be done in the backend through a ABAP code?

Passing multiple values to a single input parameter

Hi folks,
I have a Microstrategy query successfully passing input parameter to a calculation view. For example I can pass a movement type to a material movements calculation view input parameter. However if I try to pick more than one movement type the query then fails;
Generated SQL that works looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101')
a11
When choosing more than one value in Microstrategy the SQL now fails and looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101'),
'PLACEHOLDER' = ('$$MoveType$$', '103'))
a11
If I cut and paste the SQL and run directly in HANA studio the error is;
Could not execute 'select sum(a11.TOTALQUANTITY) WJXBFS1 from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER" ...' in 66 ms 361 µs .
SAP DBTech JDBC: [2048]: column store error: search parameter error: [2018] A received argument has an invalid value;TABLE/VIEW parameter: ( 'PLACEHOLDER'='$$MoveType$$, 103') not supported
Is it possible to pass multiple values in a single parameter? I'm using SP67 for this test.
Thanks,
-Patrick

Ravi, also to answer one of your questions about how this will work in Microstrategy; I just heard back from my Microstrategy developer and he is trying MSTR Freeform SQL query with syntax like this;
select (sumPAR_TEST.TOTALQUANTITY TOTALQUANTITY
from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' =('$$MoveType$$', '[Movement Type]')) PAR_TEST
In this example [Movement Type] is the microstrategy prompt. Unfortunately though it translates like this which is missing extra single quotes around each value;
select     sum(PAR_TEST.TOTALQUANTITY) TOTALQUANTITY
from     "_SYS_BIC"."development.pr1959/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', ''101', '102''))   PAR_TEST
instead of what we need which is;
('PLACEHOLDER' = ('$$MoveType$$', '''101'', ''102'''))   PAR_TEST
So at this point we are not sure if this will be possible or not.
-Patrick

How to allow multiple values in a single blank cell in WebI report

Hi
I am working in BO XIR2. I have a scenario as follows.
In a single cell (blank cell from template) i need to display multiple contact persons. When I drag the contact person name into the blank cell, I am getting an error: MULTIVALUE). Please let me know how to use a function so that I can show two or three contact person names in a single blank cell.
I tried to use Replace and Char function as follows to bring Carriage Return functionality to the cell.
Replace([Contact Person]; ";" ; Char(13)) but this did not work.
Thanks in Advance.

BOUser11:
I know this thread has been answered. I recently came across a scenario where I happen to populate multiple values in a single blank cell(from templates). But the only catch being that if user enters multiple values for a prompt you can show them in a single cell eg: =UserResponse("Enter value(s) for Branch:"). would be the formula for the blank cell. Afetr the user selects three values say A, B,C, webi puts it in the format of A;B;C. in a single cell.
In your case try giving that as a prompt to the user or answer that multi prompt some how and when u use the above formula it should suffice your requirement.
Let me know if you have tried.
Thanks,
karthik

How to show multiple messages for a single exception

hi
Please consider this example application created using JDeveloper 11.1.1.3.0
at http://www.consideringred.com/files/oracle/2010/MultipleMessagesExceptionApp-v0.01.zip
It has a class extending DCErrorHandlerImpl configured as ErrorHandlerClass in DataBindings.cpx .
Running the page and entering a value starting with "err" will result in an exception being thrown and multiple messages shown.
See the screencast at http://screencast.com/t/zOmEOzP4jmQ
To get multiple messages for a single exception the MyDCErrorHandler class is implemented like
public class MyDCErrorHandler
extends DCErrorHandlerImpl
public MyDCErrorHandler()
    super(true);
@Override
public void reportException(DCBindingContainer pDCBindingContainer,
    Exception pException)
    if (pException instanceof JboException)
      Throwable vCause = pException.getCause();
      if (vCause instanceof MyMultiMessageException)
        reportMyMultiMessageException(pDCBindingContainer,
          (MyMultiMessageException)vCause);
        return;
    super.reportException(pDCBindingContainer, pException);
public void reportMyMultiMessageException(DCBindingContainer pDCBindingContainer,
    MyMultiMessageException pException)
    String vMessage = pException.getMessage();
    reportException(pDCBindingContainer, new Exception(vMessage));
    List<String> vMessages = pException.getMessages();
    for (String vOneMessage : vMessages)
      reportException(pDCBindingContainer, new Exception(vOneMessage));
}I wonder if calling reportException() multiple times is really the way to go here?
question:
- (q1) What would be the preferred use of the DCErrorHandlerImpl API to show multiple messages for a single exception?
many thanks
Jan Vervecken

fyi
Looks like using MultipleMessagesExceptionApp-v0.01.zip in JDeveloper 11.1.1.2.0 (11.1.1.2.36.55.36) results in a different behaviour compared to when used in JDeveloper 11.1.1.3.0 (11.1.1.3.37.56.60)
see http://www.consideringred.com/files/oracle/img/2010/MultipleMessages-111130versus111120.png
When using JDeveloper 11.1.1.2.0 each exception seems to result in two messages where there is only one message (as intended/expected) per exception when using JDeveloper 11.1.1.3.0 .
(Could be somehow related to the question in forum thread "multiple callbacks to DCErrorHandlerImpl".)
But, question (q1) remains and is still about JDeveloper 11.1.1.3.0 .
regards
Jan

How can i add multiple validations for a single input box in adf?

hi,
i want to add multiple validation for a single input text control in adf like number validation and its existence in database.
MY JDEV VERSION IS 11.1.1.5.0
pls help !!!!

Hi,
1.I want to validate if the value entered is pure integer
Option 1-
select the component and in the Property Inspector, in the "Core" category select a "Converter" format, select javax.faces.Number, if the user put a string, adf show a dialog error or message error...
Option 2-
or use the Regular expression:-
http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_validateRegExp.html
https://blogs.oracle.com/shay/entry/regular_expression_validation
Also check this:-
http://docs.oracle.com/cd/E15523_01/web.1111/b31973/af_validate.htm#BABHAHEI
Option 3-
Frank in his great book 'Oracle Fusion Developer Guide' shows a example using a javascript for input which is allowed only for numbers. You can manipulate for your requirement.
Here is the code:
function filterForNumbers(evt) {
    //get ADF Faces event source, InputText.js
    var inputField = evt.getSource();
    var oldValue = inputField.getValue();
    var ignoredControlKeys = new Array(AdfKeyStroke.BACKSPACE_KEY, AdfKeyStroke.TAB_KEY, AdfKeyStroke.ARROWLEFT_KEY, AdfKeyStroke.ARROWRIGHT_KEY, AdfKeyStroke.ESC_KEY, AdfKeyStroke.ENTER_KEY, AdfKeyStroke.DELETE_KEY);
    //define the key range to exclude from field input
    var minNumberKeyCode = 48;
    var maxNumberKeyCode = 57;
    var minNumberPadKeyCode = 96;
    var maxNumberPadKeyCode = 105;
    //key pressed by the user
    var keyCodePressed = evt.getKeyCode();
    //if it is a control key, don't suppress it
    var ignoreKey = false;
    for (keyPos in ignoredControlKeys) {
        if (keyCodePressed == ignoredControlKeys[keyPos]) {
            ignoreKey = true;
            break;
    //return if key should be ignored
    if (ignoreKey == true) {
        return true;
    //filter keyboard input
    if (keyCodePressed < minNumberKeyCode || keyCodePressed > maxNumberPadKeyCode) {
        //set value back to previous value
        inputField.setValue(oldValue);
        //no need for the event to propagate to the server, so cancel
        //it
        evt.cancel();
        return true;
    if (keyCodePressed > maxNumberKeyCode && keyCodePressed < minNumberPadKeyCode) {
        //set value back to previous value
        inputField.setValue(oldValue);
        evt.cancel();
        return true;
2.I want to check if the value exists in my respective DB You must be having EO or VO if you want to validate with database in that case use the solution suggested by Timo.
Thanks
--NavinK

Create URL with multiple values for one parameter

Post Author: cbamberg
CA Forum: General
While I have no problems to create the URL to open a report with a single value for a parameter from my Java application, I don't know how to format multiple values for a parameter when I want to pass the "&prompt0=" value. The values I want to pass are numbers, not strings.
Anyone can help?

Hi gayatri,
you need to select both the product id and custname.put a count on the prodid column and write a condition of count>1 and apply it.
Thanks
Hari

Multiple values for one key in hashtable k, v

So, I know that java.util.hashtable (as of Java 1.5) uses separate chaining to handle collisions. What I want to know is how to get a certain value somewhere in that bucket if they all share a common key? Javadoc says I have to search it sequentially but doesn't say how.

OK, there's a lot of confusion on here for such a short thread :-)
Firstly, HashMaps pick which "bucket" to store your object in based on the hash value of your object (see Object.hashCode()). However, the actual object equality test (applied to the keys during a search) is based on Object.equals(). Therefore which bucket your object is in is irrelevant - the bucketting concept is just used as a way of quickly locating a subset of all the keys in the map which might match your search value. There could very well be just a single bucket in a map and it wouldn't change its logical behaviour.
This statement: "any Map including Hashtable, can only have a single (key,value) pair" is poorly worded. What it should say is that for any given key, a map can only hold a single value.
Really, you don't need to think about the internal structure of maps (i.e. buckets, etc.).
If you want to store multiple values for any given key, then make your value a list (java.util.List) and store your multiple real values inside that list.

Multiple values for a single-id

Similar Messages

Maybe you are looking for