Multiple Views Swapping in One Window (?)

How does one achieve the iTunes window effect whereby the primary contents change based on which 'source' (Library, Podcast, Videos, etc) is clicked? In IB does each source content have its own nib or window or view. They are all contained in what? How does one swap between the source contents?
Is there some Cocoa abstraction whereby a 'ThingA' has multiple 'ThingBs' but only one 'ThingB' is visible at any given time?

I wasn't very clear in my original question - but then I don't know the right words to phrase the question.
But I did figure it out:
1) Use IB to create two NSView instances, viewA and viewB.
2) Use IB to create a window with a custom view and a couple of buttons.
2a) Give the custom class two outputs, one for viewA and one for viewB
2b) Give the custom class two actions, toggleViewA and toggleViewB
2b) Implement the custom class to make viewA and viewB subviews.
3) Use IB to connect one button to toggleViewA and the other to toggleViewB
4) Build and run. Hit the toggle buttoms a few times.

Similar Messages

  • Preview; How can I open multiple PDF's in one window with Preview?

    How can I open multiple PDF's in one window with Preview?
    I have gone to Previews preferences and selected 'Open groups of images in the same window' and have tried every setting imaginable and nothing works. What am I doing wrong?

    Hi, a few ways..
    http://www.monkeybreadsoftware.info/Freeware/CombinePDFs.shtml
    http://www.monkeybreadsoftware.info/Freeware/CombinePDFs.shtml
    http://www.macosxhints.com/article.php?story=20060327192826493&lsrc=osxh

  • How do you get Adobe Acrobat X Pro to open multiple pdf's in one window

    How do you get Adobe Acrobat X Pro to open multiple pdf's in one window
    I just got upgraded to Windows 7 64-bit and had to update to Acrobat X Pro.
    I was using Acrobat 8 Pro on my XP machine and this was nice since i usally have muliple files open at the same time

    Hi Richard,
    Due to technical limitations, MDI was dropped with the Acrobat 9 release:
    http://blogs.adobe.com/acrobat/mdi_vs_sdi_in_acrobat/
    -David

  • Having multiple tabs open in one window, and then opening a new window and closing it, will close the newly opened window, but it will want to close the other original window with the multiple tabs as well.

    This only happens if the original window has multiple tabs, and the new window has only ONE tab at the moment you close it.
    Also, the problem only occurs when TWO windows of firefox are open. So opening up a 3rd window, and then closing it, will not give you any problems. The interaction occurs between two windows of firefox only.

    This can happen if you drag a tab slightly down in the browser window while clicking.
    Firefox has a feature called tear-off tabs
    You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
    You can also do this via the right-click context menu of a tab: Move to New Window
    You can drag that tab back to the tab bar in the original window to undo that detaching.
    * https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

  • Firefox 23.0 doesn't warn me when closing multiple tabs, unless only one window is open.

    I've selected the option for Firefox 23.0 to warn me before I try closing windows with multiple tabs. If only one window is open and that window has multiple tabs, I receive the warning. If more than one window is open and multiple tabs are open in any or all of them, the warning doesn't appear until I get to the final open window.

    hello, the message is only there by design if you close the whole browser with still a few tabs open in it (and also only when you choose not to store browser history). if you want to restore one of multiple windows closed during a session you can do so from the history menu or the keyboard shortcut ctrl+shift+N.

  • Need Help backing up multiple iOS devices to one Windows PC computer

    So, first off, let me say that I have been scouring these forum posts as well as reading many google search results for what I am about to ask here, but I have not been able to find a definitive answer as to go about what I am trying to accomplish.
    Some background – we are using 2 iphones both using the same Apple ID.  We have no need to create separate Apple IDs as this has been working just fine for us for the past 3-4 years.  Everything from text messaging, facetime, to purchases I have setup just the way we like it and we have no issues with anything conflicting.
    So, here goes.
    I would like to use one Windows computer using the same user account on said PC to be able to backup both my iphone and my wifes iphone.
    Here is the issue I am running into.  I have used iTunes to backup my wifes iphone and all went as expected.  What I then tried to do was plug my iphone into the computer and attempt to backup my iphone but problem is, I get only the option to setup the phone as new or restore from my wifes backup, neither of which I want to do.
    So, I thought about using the trick to create another library by holding down the Shift Key while starting iTunes and then selecting Create new library.  But when I then plug in my iphone and fire up and select the newly created library to backup my iphone to, I still get only get the option to either setup as new or backup from my wifes iphone.
    Am I doing something wrong when creating this new library or is what I am trying to do not possible.
    I know I can create another user account on the PC and the backup will then work just fine as I had to do it this way for a family member because I could not get the second library option to work the way I am trying to make it work.
    In this post I created, https://discussions.apple.com/thread/6652211 I got no responses that helped me figure this out.
    So, if anyone can set me straight on how to use iTunes to backup my devices using the same PC user account with all Apple devices using the same Apple ID I would greatly appreciate it.
    Step by step would really be helpful if it is at all possible.
    - Dan

    There are experts here with far greater knowledge than I
    but here goes
    This is where windows stores the iTunes back up files
    Windows Vista and Windows 7:
    \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    So - if you cut the file and paste it elsewhere (Desktop or Documents or a flash drive) - will the iTunes be fooled into creating a second one?
    Of course you would have to label them well in case you need to retrieve them later - but I guess worth a try
    If it does not work you can always plop the prior files back to where you pinched them from
    Please let us know
    Thanks

  • Unable to minimize windows or view more than one window

    I had a MacBook Pro prior to the MacBook 2015. I never had a problem minimizing windows. I really need to have more than one window open at same time, but I can't seem to do this with MacBook. There usually is a white dot in middle where it was yellow in MacBook Pro to minimize the window. There is an icon with double page symbol I can click in the right corner, but when it shows a thumbnail image of each website on one page instead of minimizing the window when I click on it. Is there something I can click on to minimize the window so more than one window appears at the same time? I do not even see line/arrow appear in corners of window to drag the window to a smaller size.

    I do not even see line/arrow appear in corners of window to drag the window to a smaller size.
    Just put your cursor on any edge or corner of a window until you see the double arrows then click and hold while you drag to resize. This is no different than it's been for the last 4 years since the introduction of Lion.
    There usually is a white dot in middle where it was yellow in MacBook Pro to minimize the window.
    The yellow dot will minimize the window to the Dock.
    http://www.peachpit.com/articles/article.aspx?p=412362&seqNum=6
    In Yosemite, a click on the the Green dot goes to full screen, an Option click is like the prior green dot's performance.

  • View Multiple PDFs in tabs in ONE window in ADOBE 9

    OK...so after hours of uninstalling and reinstalling adobe 9 to get past adobe's multiple error messages and running CHCKDSK and Windows registry cure I finally get Adobe reader 9 to work, only to find out that
    I can not view multiple pdf's in one window in tiled tabs. Basically I need to have several pdf's open in one window in adobe. I'm a student and writer and deal with multiple e-books at once for dissemination and I do not want them open in multiple windows, just one window with multiple tabs.
    In adobe 8 this option was in preferences. It does not exist in adobe 9. I can not have all these pdfs open in different windows, I want multiple pdfs to open in one window.
    This has been a very frustrating evening dealing with adobe 9. I wish I would have never installed it in the first place. I probably won't be buying 9 pro, its pretty crazy that there are all these frustrations. This whole thing with the Error 2330.Error getting file attributes C:\Program Files\AdobeReader 9.0 GetLastError:1392 which I finally fixed myself and then to find that there is not any way to view multiple pdf's in one adobe 9 window--at least according to what can be found here on adobe, I'm just in tears. I'm not a technical person and I have things due on monday. This is very frustrating.

    The change is due to Adobe's following Microsoft's user interface
    guidelines. I would recommend getting MS to change its tune.
    Mike

  • How to open multiple C source files in one window in Xcode

    I could not find the way for opening multiple source code in one window in Xcode.
    Is it possible?

    Yes that was my question, thank you very much...
    you mean like in tabs or somethign? I don't quite
    understand your question. If everything is in one
    project, you can switch your file viewer to editor
    mode by clicking on Editor in the top left and then
    navigate through your files with the left tree.

  • How can i set up multiple default web pages in one window

    I want multiple web pages in one window i.e for example google.com and yahoo.com should open in one window,showing their respective home pages in one window in a rectangular box(in my words).

    I presume this is to open multiple home pages, when FireFox launches. This will open one tab per URL, on one browser. To do so...
    Go to 'tools' > 'options' > type your URL as such: http://www.google.com|https://www.yahoo.com.
    There should be a vertical bar (shift backslash key), between each URL typed.
    Source: http://www.davidgumpper.com/applications/open-multiple-tabs-as-a-browser-default-home-pages

  • Syncying multiple ipods to one windows pc

    Hi,
    What happens when you sync multiple ipod touchs to one windows pc ?
    In particular what happens if all 3 of them have the same app in common (same version of Angry Birds for example) along with many different ones
    Will i have 3 seperate versions/"copies" of the apps they have in common on my pc or will the later one over write the earlier one's?
    Thanks in advance

    This is a good resource:
    How to use multiple iPods with one computer

  • ADF - Multple View Objects in one ADF table - Jdeveloper 11g

    Hi,
    I'm using Jdeveloper 11g, is there a way to use multiple view objects in one ADF table? And if so, do you have an example?
    In my case the view objects are not based on a database table they were created based on an ESB wsdl, one is for person and one is for address.
    Any information or pointers you could provide would be appreciated.
    Thanks!

    Hi,
    That would be a good solution, however, I'm supposed to see if there is a way to use the VOs that were created for person and address. Even better if the solution requires little coding.
    Is it possible to combine these two VOs into a single VO to use with an ADF table or to use both of them in a single table? Or is there some other solution that would enable me to use the person and address VOs in a similar manner?
    Thanks!

  • One window

    hello
    how can i open multiple pdf files in one window?
    thanks for your answer

    Not possible with the current version of Adobe Reader.

  • Ability to view multiple files in ONE window

    I can see here that this is not a new topic really but the thing with Acrobat 9 is so frustrating that it is just unbelievable.
    This is another pearl:
    Acrobat 9 "lost" its predecessors ability to view multiple files in ONE window. After opening four only documents I cannot see anything on the screen because the toolbars on each individual window cover all necessary view and nothing is left for the actual document. And sometimes I need to open 20 documents!
    This is ABSOLUTE DISASTER!!!
    I found some explanations from Adobe on the Web that are more than a year old.
    I was sure that by now this unfortunate mishandling of that feature (apparently it was dropped out from A9 deliberately - WHO'S IDEA WAS THAT?) would be somehow restorable.
    Would anyone happen to know if this feature can get restored to how it was working in A7 or 8 (without the need to uninstall A9 and install A8)?

    No, it can't be restored, unless Adobe decides to change the way Acrobat works (which is possible, but not likely).
    By the way, it was Microsoft's idea... Adobe were just following their example on this.
    You can make a feature request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • How do I view multiple images in one window?

    How do I view multiple images in one window?  I want to compare images side by side, not in tabs.

    Thank you, Barbara.  I found that I had to close the program after I turned on "allow floating documents" and restart, before I was able to go to "float all in windows". 

Maybe you are looking for

  • Home Directories can't be deleted in Workgroup Manager

    I set up a Home Directory at the ROOT level of my server to test it. I was successful so I "thought" I knew what I was doing. I needed the Directories to be in my XRaid as that's where the "room" is and I expect to have 15-20 Home Directories. So I d

  • "reconnect" old events to the Event Library

    I imported a bunch of DV tapes last spring(onto HDD "iMovie VIdeos 1") and everything worked great, but I hadn't used iMovie since then, until this week. I'm now importing old VHS tapes(onto HDD "iMovie VIdeos 2"). This importing is also going well.

  • OWB AND BI IMPLEMENTATION

    If you use OWB release2 do you have to install a separate BI component?

  • Why won't Adobe accept my Serial No. for Elements 10?

    Why won't Adobe accept my Serial No for Elements 10.  I purchased it quite a while ago and never installed it until today.  It is refusing to ackn owledge my Serial no as a legitiamate no. yet I have triple checked it and it is from the DVD box I pur

  • Event 61035 , LS MCU Infrastructure

    I have setup a Lync server 2013 standard Front end on windows server 2012 R2. As i review the event viewer of the windows, the following error appears: ((((This process was not able to update its health status The Web Conferencing Server failed to se