Multiple websites one domain

Ok I've split my website into 2 separate websites as it was getting a little large.
I host on mobile me.
Now I need to get the new one listed in Google and get some analytics into it and get it listed in webmaster tools.
I tried adding it to webmaster tools - which worked but no verification required ???
Now I'm trying to do google analytics and I need to decide if it is multiple domains etc etc...
I'm a bit confused about this
If I select multiple subdomains do I need to redo the analytics code on the first website?
Would I be better off with another domain name?

There are some problems with having multiple sites from multiple domain.sites files and multiple purchased domain names.
Multiple Sites with Domain Name(s) in a Single MobileMe Account
Here's how to have multiple sites in a single MMe account with one or more sites having a domain name.
A. All sites are in the same Domain.sites2 files
1 - only one site can use the CNAME method of domain name forwarding and it must the top site in the left hand pane of iWeb.
Click to view full size
2 - the other sites must use URL domain name forwarding which directs the domain name to the site's full MMe URL, http://web.me.com/MMeUsername/SiteName, or, if there is no domain name, just MobileMe's full URL.
B. Each site is in its own Domain.sites2 file.
Again, only one site can use CNAME forwarding. This presents a problem since CNAME forwarding directs the domain name to the basic MMe account URL: http://web.me.com/MMe_Username/ which uses an index.html file in the root folder of the account, iDisk/Web/Sites. Each time a new site is published or an existing site uses the File->Publish Entire Site a new index.html file is created in that root directory, iDisk/Web/Sites folder, directing the browser to that particular site. This file is what the CNAME method uses to find the site it represents.
Therefore some steps must be taken to assure that the index.html file in the MMe Accounts root directory always points to the correct site. This can be accomplished is three ways.
1 - don't use the CNAME method. Just use URL forwarding . This, IMO, is the simplest method as it doesn't requre any additional effort on the user once the domain name has been set up.
2 - use the following method suggested by Wyodor in this topic: Is it possible to have multiple sites when using ur Domain name?
In iWeb domainfile 1:
Create a dummy site : _dummy
with a blank page.
Create your working site : Whatever
Add pages
Publish both Sites to the same same location on the same server.
Your _dummy site is now the default Site.
Check.
In iWeb domainfile 2:
Create/Use your CurrentSite.
Move a page to the top of the Site and back. Publish the Site.
iWeb will create a new index.html file in the root of the server and from now on CurrentSite is the default site.
Check.
From now on, never move your Whatever Site to the top of the list in the iWeb sidebar and never change the page in the _dummy site.
Simply do not touch your _dummy ever again. And never forget that.
3 - use Ethmoid's suggested method in Using two sites - setting one up with separate domain? or republishing the entire site that uses CNAME forwarding. Just making a minor change and publishing the site changes does not create a new index.html file.
The entire site must be republsihing in order to get that new site.
Or keep a copy of the CNAME site's index.html file on your Mac and replace it manually in the iDisk/Web/Sites fodler when necessary.
NOTE: the CNAME method provides a shorter URL: http://www.DomainName.com/Site_Name/PageName. CNAME does not have masking.
The URL forwarding displays the full MMe URL:
http://web.me.com/MMeUsername/Domain_Name/PageName.
With domain name masking that will be shortened to:
http://www.Domain_Name.com for every page of your site.
However, with masking visitors will only be able to bookmark and enter at the first page of the site. If a page is refreshed the visitor is taken back to the first page. Also search engines will only be able to index the first page of the site.
OT

Similar Messages

How to Publish Multiple Websites Using Domain Masking

Let's say I have a mobileme acct called applesoranges, but then I decided not to use this name for my website. Using iweb, I have created a different website called blueberry.com, and was able to figure out how to set up my personal domain and then mask appleoranges so that only blueberry.co, appears.
I now want to add another website called strawberry.com. With one mobileme acct (applesoranges), is it possible to host 2 separate websites, each of which is masking the original mobileme acct? How does one set up 2 separate websites using iweb (each masking the original acct name)?
Many thanks!

For every MobileMe account you can only use the personal domain name option and CNAME only once. You enter your first domain name into your MMe account and then go and set up CNAME forwarding at your domain registrar to forward to web.me.com. For any other sites that you create, you need to go to web forwarding. You set-up the other domain names by using masked web forwarding and point them to web.me.com/username/sitename and by masking these will just show your domain name address and not your MobileMe/iWeb url.
Make sure that you separate out your sites, as it will be easier. You can either duplicate the domain.sites files and have one site per a domain file or use a program called iWebSites to help you manage multiple sites.
You also have the option of not using MMe and you can publish to a folder instead and upload directly to each domain hosting space. This gets away from the problem of how to forward sites to iWeb/MMe.

Multiple website, one MobileMe account

OK, so I have created a webiste already and it is located on a domain name that I bought from GoDaddy.
I have just purchased ANOTHER domain name and want to create another website with that domain using iWeb '08.
How do I do that?

Only one site can use the CNAME forwarding method with a MMe account. All subsequent sites must use the standard domain name forwarding (and masking if desired) method. This screenshot shows how to set it up with GoDaddy:
Click to view full size
If you opt of the masking all pages will display just the domain name and visitors will only be able to bookmark the first or entry page of the site.
OT

Multiple websites on multiple user accounts. Want all websites in one user

I have multiple websites in multiple user accounts. At the time I started this way iWeb 08' didn't allow more then one website per user.
I now have three limited user accounts with three iweb sites. One in each account. I'd like to move two of them to the main user account and have all three available to me in the user account I call mine. Is this possible with iWeb 09'? i can, by hand, recreate them in the main account, but I'd like an easier solution.
I am hoping it is possible to combine the files from each "Domain.sites" and make one magical come together with each site in place.
Thanks Everyone

Move all of the Domain.sites2 files to one user account and rename them to represent the site inside, i.e. Myfirstsite.sites2, Mysecondsite.sites2, etc. Put them all in your User/Library/Application Support/iWeb folder.
Using the application suggested by Wyodor merge the sites into a new domain file. You can only merge 2 sites at a time so you'll have to do 2, then select that new one and merge with a 3rd file, etc.
Click to view full size
New domain files are created by the merge process so your original domain files will be untouched.
OR, you can leave the domain files as they are, named individually, and use iWebSites to choose and open the site you want to work on and publish. I manage multiple sites with iWebSites:
This way the domain files loads more quickly and if there's a problem only one site is affected.
OT
Click to view full size

Multiple sites, and domains, only one log file is working

I have a custom install of Entropy latest version for apache 1.3
OS X 10.4.5 on an Xserve dual g5
Everything is running fantastic save for one thing.
The sites that I have set up for multiple domains and multiple websites only the site that is in the top of the List in Server Administration under Web and so forth... I have the top site (which is our own site) and the others under that gain no hits and stats information because everything is being logged under the top site. Does this make sense?
I use Awstats to generate information for the various sites but only the top site generates hits and it gets the information for everything.
I am using entropy because I needed a level of security to avoid spammers on our guestbook and contact forms and entropy has the ability to use turing test.
Our various sites are now requesting custom stats and information but cannot get this to work. I have set different file names for each of the sites logs both hits and error log.
What do I need to check and what information can I supply to you from my custom install that will help you help me get this working.
Thank you everyone for your help.
Joseph

Add me to the "me too" list.
Could it have anything to do with the difference between a "local host aliases" and "virtual hosting"? Or is that just related to Mail service?
Maybe it belongs in another thread, but what are most folks using for log analysis? I've got 40 or so virtually hosted domains that I'd like to track so I can kill the sites that aren't doing my company any good...

Is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from.

Open multiple websites in one window

I would like to open multiple websites in one window with multiple tabs using VBA in Excel. My present code opens each website in a separate window.
Sub Weather()
' Look at weather websites
    Dim URL As String
    Dim ie As Object
    URL = "http://cleardarksky.com/c/AnaheimCAkey.html?1"
    Set ie = CreateObject("InternetExplorer.Application")
    ie.Visible = True
    ie.navigate URL
    Set ie = Nothing
    URL = "http://www.goes.noaa.gov/GSSLOOPS/wcir.html"
    Set ie = CreateObject("InternetExplorer.Application")
    ie.Visible = True
    ie.navigate URL
    Set ie = Nothing
    URL = "http://www.weather.com/weather/hourbyhour/l/92886:4:US"
    Set ie = CreateObject("InternetExplorer.Application")
    ie.Visible = True
    ie.navigate URL
    Set ie = Nothing
    URL = "http://www.wunderground.com/cgi-bin/findweather/getForecast?query=92886"
    Set ie = CreateObject("InternetExplorer.Application")
    ie.Visible = True
    ie.navigate URL
    Set ie = Nothing
End Sub

Hi,
It depends on your popup blocker (built-in or Addon toolbar), tabbed browser settings and IE security settings.
See general tab of Internet Options, Tabs button.
you can specify a target parameter in the navigate method to reuse the one IE window and open each site in a new tab (depending on your settings above).
window.navigate method
Regards.
Rob^_^

Multiple domains pointing to one domain. How best for SEO?

I'm a therapist. I have just created a site eg mytherpaystudio.com I own several domains (currently as individual websites) ie thistherapy.com, thattherapy.com and anothertherapy.com etc. I think I made a big mistake when I created these websites because they are basically clones of each other, which I have learned through reading Google webmaster info etc may well have created SEO problems ie penalised me. I'm revamping the whole thing because I have a new therapy studio - massage, counselling, movement therpist etc
Would I be best:
Deleting the whole content and just pointing the domain name to the therapystudio.com site, or
Only leaving content on the websitess which only pertains to the theraspy type ie thistherapy information, othertherapy information and using hyperlinks and text links to the mytherapystudio site?, or
Anyone have another suggestion altogether
Obviously I want the best possible seo outcome. I've stuck with iweb. I use RAGE iweb seo tool and sitemap automator.
Thanks in advance for help

I am a therapist as well and from my own experiences, I think you might be better forwarding the other domain names to the new therapy centre website.
I did the same as you at one time, thinking that more sites might be better, but then decided that I would be better cutting down, so I tried a little re-branding of my practice and purchased a new domain name and just have 2 websites that advertise what I am doing - namely Structural Integration/Rolfing and Orthopaedic/Sports Massage and Rossiter System.
I have to say though that when I re-designed the 2 websites, I ditched iWeb and one site I re-built using EverWeb (http://www.everwebapp.com), which is a good alternative to the now unsupported iWeb and for the other site I used Joomla, which is one of the Content Management Systems.
The more sites and domain names you have, you more you have to get found, but I then found that I was losing track of what I did have. As well as my now 2 websites and domain names I also make use of the free website building facilities by using WordPress.com, where you can set up a free website and publish to the WordPress severs and sometimes Wix - in this respect, the more you have the more you will be found.
Good luck with it.

Created multiple websites with iwebsites, now need to save multiple domains

I have created multiple websites with iwebsites on iweb 06, now I want to save these sites so in case there is any problems when I upgrade to 08. How do I do this?

Hello Paul,
You need to locate the Domain files for each website. You should find these under your account (the house icon in the finder)/Library/Application Support/iWeb.
Vonz.

Multiple AD FS Instances/independent AD FS Servers in one domain or forest

Hello together,
Is it possible to install multiple AD FS Instances on independent AD FS Server in one Domain or Forest? If yes, is that supported from Microsoft or best practice?
Best regards
Ulrich Greshake

Hi Ulrich,
Is it possible to install multiple AD FS Instances on independent AD FS Server in one Domain or Forest?
Yes, it is possible. Actually, multiple instances in a single ADFS farm are very useful for fail-over.
Here are some references below for you:
Active Directory federation Services Question - Can I run two seperate ADFS instances in my domain?
https://social.msdn.microsoft.com/Forums/exchange/en-US/3c8903c8-d6d6-471d-9966-b23c83172a40/active-directory-federation-services-question-can-i-run-two-seperate-adfs-instances-in-my-domain
ADFS Deployment Topology/Architecture
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e85b1b06-9559-4028-b7cf-eed6582fe60d/adfs-deployment-topologyarchitecture?forum=Geneva
ADFS High Availability – Quick Reference Guide for Administrators. Implement Single sign-on for Office 365.
http://blogs.technet.com/b/ucando365talks/archive/2014/04/15/adfs-high-availability-quick-reference-guide-for-administrators-implement-single-sign-on-for-office-365.aspx#.VMnxiXkfpes
In addition, here is a dedicated ADFS forum below:
Claims based access platform (CBA), code-named Geneva Forum
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

One Domain Controller, multiple Transport Landscapes - possible?

I would like to have ONE domain controller - configured in Solution Manager - to manage TMS configuration for ECC, BI, etc. I am looking at this domain controller to be the central point for CTS+ and ChaRM.   This means multiple Development systems and associated Quality Assurance systems.
DECC --> QECC --> PECC
DBI --> QBI --> PBI
Is this even possible?
The issue seems to be the standard '/SAP/' transport group for the 'SAP target for Default Layer'.   Is there a way to set up the standard SAP transport group to be uniquely identified in the domain controller if there are multiple SAP components supported by one domain controller?
Thanks in advance for the assistance ...

Hi Peter,
Thanks for the response.    My concern was the SAP default transport layer.   Another team member and I worked on this in more detail and I was able to successfully a specific SAP default transport layer for each of the Development systems and give each one a unique name.   I created the transport layers and transport groups and STMS accepted them, but we haven't actually used any of this yet so whether or not this is actually successful remains to be seen!    If
Regards,
Laura

Multiple (but separate) domain problem & Apple's slow and useless response

I am having problem with multiple (but separate) domain. I opened a ticket.
Here is Apple's slow and useless response and my follow up.
This follow up is not going to resolve the issues I am having. The sites are not in one domain file. I have split them into separate domains. I found that the simplest change to any page made the publishing process extremely and reasonably slow. If I updated a single site, iWeb republishes the whole conglomeration; hardly the most efficient way.
I have several directories under the ~/Library/Application Support/iWeb/ directory with separate Domain.sites2 files for each site:
consultingAM.com
DarkAssassinMovie.com
Fuzzy Llama Junior Optimist Club
GulfportOptimist.com
OptimistView
pAwesomeProductions.com
www.nfdoi.com
With the previous version of iWeb, I navigated to a specific ~/Library/Application Support/iWeb/ directory, selected the Domain.site file, and opened it. This would open iWeb with the selected domain. Several of the sites have their blog page with the RSS subscribe option.
Once I made the update, all I usually had to do was publish site and all was well. Occasionally, I would have to do a publish all if I changed domains. All in all, I had no problems with publishing once I found the right steps to be able to maintain multiple domains.
Now, using the default publish or publish all process, all I get is the last site I published. In order to get things semi-functional, I published a site, then I would go to iDisk/Web/Sites/ directory, select the folder name for the site I had just published, then copy it or move it to iDisk/Web/Sites/iWeb directory. This was rather slow and I suspect it is not an approved solution, but it semi-worked. My sites are back up, but they are not fully functional.
Is there anyway to get back to using the ~/Library/Application Support/iWeb/ directory (separate Domain.sites file for each site) process to publish multiple sites? If not, is there any way to suck in the various domains back into one? If that is possible, will it take hours to publish the combined 2-3GB like it did with the previous version?
How do I reverse the 'personal domain' process? I do not want to do this at this time. I just wanted to see what the steps were. I have done the first step, but not the second.
I was glad to see some of the changes made in the upgrade (web widgets, maps, html snippets, theme switching), but I am too happy about the changes made by the upgrade process. In the past, I upgraded my Apple related stuff as soon as it came out. Based on this upgrade, that won't happen again.
It took you guys 5 days to get back to me (during which time several of my sites were down) and I do not believe the information you provided is going to solve my specific problems. I am very disappointed with the results of this upgrade. Clearly there was inadequate testing of this product before it was released. I cannot recall seeing the Apple discussion forums with hundreds of topics and thousands of posts within a week or two of a new release. Apple had to upgrade iWeb in the first week, another poor sign.
Apple is beginning to slip back to the pack; all vendors all below average. Apple is getting more like Microsoft everyday. First Apple delays the release of an OS upgrade so they can concentrate on a freaking phone, now you release software that is so buggy it should be classified as beta at best.
Some of the changes/problem I am seeing since the upgrade (in addition to the problems mentioned previously) are:
layout changes; some of my pages no longer look the same; same of the changes are so bad the pages are unreadable
broken photo pages; some of my photo pages no longer work; some of them have no text or pictures
file/page name changes; why would Apple change the location of the files; now my domains are not pointing right location; special characters (like spaces, ampersands, etc.) are handled differently in this version; specifically, I see that spaces are changed to underscores (_); iWeb used to use '%20' for spaces; what was Apple thinking?
broken 3rd party themes; I know Apple is not responsible for 3rd party themes, but you should certainly be aware that they exist
Based on what I am seeing online, most of the people who are complaining about major iWeb issues are not newbies; based on the technical details in the threads, there are clearly some experienced people who are trying to figure things outw. I have lost many hours trying to figure this mess out. I now have to review hundreds of pages to try get things to look and work the way they did before the upgrade. I have had to handle dozens of phone calls and emails from my viewers and subscribers trying to explain the situation.
I googled 'iweb 08 *****' and got nearly 50,000 hits! I think Apple better get in front of this train before it gets run over.
On Aug 19, 2007, at 11:09 AM, .Mac Support wrote:
Dear David,
I understand that you are experiencing an issue viewing some of your websites published in iWeb:
I have examined all of the published pages and they appear to load and function as expected. If you published your website to .Mac, you can visit it either of these ways:
- In iWeb, click the Visit button in the lower-left corner.
- Enter the following URL into a web browser:
http://web.mac.com/daviddawley/
If you have published more than one website, the URL above will take you to the default website, which is the first website listed in iWeb. To visit another website you have created in iWeb, use the following URL format:
http://web.mac.com/daviddawley/iWeb/YourSiteName
Using this form, the web addresses for the two sites you mentioned would be:
http://web.mac.com/daviddawley/iWeb/FuzzyLlamaJuniorOptimist.com
http://web.mac.com/daviddawley/iWeb/pAwesomeProductions.com
To change the default website, simply open iWeb, and in the Site Organizer, drag the desired default website to the top and republish to .Mac.
NOTE: Be sure to give each website a unique name. This will help prevent one website from overwriting another. For further information, refer to the following article:
iWeb: Do not use similar names for your sites
http://www.info.apple.com/kbnum/n303042
If you still experience issues with the website, try the following troubleshooting steps:
WAIT SEVERAL MINUTES
If your website has movies, you may need to wait several minutes after going to the website before the movies are ready to play. The QuickTime Player icon indicates that a movie is still loading.
CLEAR YOUR BROWSER CACHE
If you use Safari, you can clear your browser cache by choosing Empty Cache from the Safari menu. If you use another browser, consult that browser’s documentation if you need assistance in clearing your browser cache.
UPDATE YOUR BROWSER
Make sure you are using the latest available version of your web browser when viewing pages published in iWeb. If you use Safari, you can check for updates by choosing Software Update from the Apple menu. If there are any available Safari, Security, or Mac OS X updates, install those updates and try looking at your website again.
If you use another browser, consult that browser’s documentation if you need assistance in updating the browser.
TRY ANOTHER BROWSER
If you use a Mac, try viewing your website with Safari or Firefox. If you use Windows, try Internet Explorer 6 or Firefox. Firefox is a free download available here: http://getfirefox.com
TRY ANOTHER NETWORK
If possible, try viewing your website from another network or Internet connection. If you can successfully view the website from another network, please consult your network administrator or Internet service provider (ISP) to resolve this issue.
Important: Mention of third-party websites and products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the selection, performance, or use of information or products found at third-party websites. Apple provides this only as a convenience to our users. Apple has not tested the information found on these sites and makes no representations regarding its accuracy or reliability. There are risks inherent in the use of any information or products found on the Internet, and Apple assumes no responsibility in this regard. Please understand that a third-party site is independent from Apple and that Apple has no control over the content on that website.
Sincerely,
Mel
.Mac Support
http://www.apple.com/support/dotmac
http://www.mac.com/learningcenter
Support Subject : iWeb
Sub Issue : I can't publish to .Mac from iWeb
Comments : I was interested in forwarding one of several iWeb based sites to one of my domains. I wanted to see what the steps were. I believe I inadvertently started the process for moving the site to www.nfdoi.com site. I have several sub directories under the ~/Library/Application Support/iWeb directory with separate domain.sites files (now domain.sites2).
I was going through all of my domain.sites files and opening them in iWeb08; then publishing them. Somewhere along the line everything blew up. Most of my iWeb sites no longer function, It appears that every other iweb site other www.nfdoi.com is down EXCEPT the last one I published. I have made a mess of things and would appreciate any help.
Don't work:
http://web.mac.com/daviddawley/FuzzyLlamaJuniorOptimist.com
http://web.mac.com/daviddawley/pAwesomeProductions.com
Works:
http://web.mac.com/daviddawley/Optimist_View/OptimistView.com/OptimistView.com.h tml
========= PLEASE USE THE SPACE ABOVE TO DESCRIBE THE ISSUE BASED ON THE QUESTIONS BELOW =========
1. What version of iWeb are you using to publish to .Mac? iLife 08
2. When did you first notice this issue? After publishing a few sites.
3. What happens, including any error messages, when you try to publish your site?
--------------------- Additional Info -------------------------
Alternate email address : [email protected]
OS Version : Mac OS X 10.4.10
Browser Type : Safari 2.x
Category : I can't publish to .Mac from iWeb
Connection Type :Other
TrackID: 4154168

Just got off the phone with Apple Support. There procedure was the following:
1. Go to the Apple TV, select settings, general and scroll down to reset.
2. Select reset and then select reset all
Apple TV will go through a restart after the reset and you will have to select your network then log in with your network or Airport Express password. You will then have to turn on home sharing and It will then ask you for your Apple ID for the iTunes store and then the password. At this point you may not see your library, because the Apple TV wants you to turn on home sharing on your home computer that is hosting the movie library. Turn off home sharing on that computer, restart iTunes and turn on home sharing again. After this is done you should be able to see you library listed under the computer.
After going through these steps, when I select an HD movie from my iTunes library the movie comes up after about a 5 second delay.
Hope this helps! I am back up for business.

How we set up multiple websites on OSX Server

BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!

OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John

Multiple websites, multiple woes: Best IWeb 09/MobileMe strategy?

I'm still a bit confused as to the best strategy for using IWeb 09's much-touted-in-reviews but apparently rather limited ability to publish to two or more separate MobileMe accounts.
In IWeb 08, I would set up several different user accounts on my Mac, associate each one with a separate MobileMe account from my Family Pack, and maintain separate domain files for each (all stored in the same folder on my hard drive, but given different names like "Domain_personal" or "Domain_business"). This worked fairly well, despite the inconvenience of sometimes not having a photo I wanted to use readily available, as it might be part of an IPhoto library that belonged to another account.
(I would generally log-in to the user account I wanted to use and work on the MobileMe domain file I had "assigned" to that account. But now and then I might forget, and start working on a domain file for the "wrong" Mac user account. That didn't seem to be a problem -- I could still save my latest changes, log out and then log in to the "right" user account, where I could publish my revised domain file to the intended MobileMe account.)
But in IWeb 09, my previous strategy is resulting in a slew of problems. Unexpected crashes. Or IWeb refusing to save a file after I've changed it (it just tells me the file cannot be saved, no explanation). Or images and/or video files that will suddenly go missing. Last night I found that one domain file/site I had published over and over with no problems in Iweb 08, now appeared to be a complete mess in IWeb 09 -- numerous missing images, including some png files that are apparently part of the Apple-supplied IWeb design template. Yet the graphics (mine and Apple's) were suddenly back when I opened that same domain file in another user account on my Mac.
So my IWeb 08 strategy does not seem to be working in IWeb 09. I guess an alternative would be: Do all my IWeb work in the same user account, swap domain files as I'd been doing before, and reset my MobileMe identity for that user account every time I want to publish. Or -- essentially the same thing -- use IWeb's ability to maintain multiple sites in the same domain file. But once again, I'd typically need to manually change my MobileMe identity to a different account at publishing time, to get an individual site going to the right place. And hope like heck that I don't accidentally mess up ICal, etc., by accidentally syncing to "wrong" Mobile Me account, to which I've logged in solely to accommodate IWeb.
Am I missing something here? Is there some logical reason why Apple would set up IWeb 09 to allow you to publish multiple sites, stored in one domain file, to various multiple external sites via FTP with ease? But make it essentially impractical to publish to several different MobileMe accounts, without the hassles I've mentioned?
It seems to me that if I want to use IWeb 09 for multiple web sites, the only sane thing is to drop my extra MobileMe accounts as soon as possible, and add some more external sites --- since (if you can do the RSS, etc., yourself) Apple has just made it so much easier to publish to anywhere-else-but-MobileMe.
Anybody have a different take on this? Or a better solution?

webalias rex wrote:
Anybody have a different take on this? Or a better solution?
The following may not be a better solution, but it does provide a different "take". I haven't tried it myself, so I wouldn't be surprised if there's a fatal flaw in the idea. Anyway, taking that risk...
Since we don't know what, in iWeb '09, is causing your "slew of problems", it's not possible to say whether this proposed approach would make any difference. But in theory it would enable you to:
• maintain your separate Domain files
• publish to your multiple MobileMe accounts
• from the same user account on your Mac.
Take a look at this Apple doc:
MobileMe: How to publish a custom website
The idea is to publish your iWeb sites to different MobileMe accounts from a single Mac user account as +"custom websites"+ and, as that doc says:
"If you only plan to publish custom sites to your MobileMe account, you can make your site's URL shorter by placing your site (and its main index.html file) in the main Web/Sites folder instead."
...Presumably iWeb 09's integrated non-MobileMe publishing is FTP only, not WebDAV that iDisk requires. So you would need the free Cyberduck or pay for Transmit to publish your sites via WebDAV protocol to a MobileMe account's iDisk. And for a Domain you are about to publish, you would have to remember to use the appropriate MobileMe "destination" of the several you've set up to use in Cyberduck or Transmit.

How to use IWEB for multiple websites?

Okay.
I have two websites. One on a 3rd party, one on .MAC.
Computer 1 = .MAC website
Computer 2= 3rd party website
I want to use computer 2 to edit my .MAC website and moved the DOMAIN file but haven't open it in iWEB on the second computer as I need to know how to open and not destroy the 3rd party website.
How is this done?
Thanks.

You can rename the domain file to something descriptive of the site and open them manually. But I find it much safer to use iWebSites for managing multiple sites, over 25. I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.

Multiple websites one domain

Similar Messages

Maybe you are looking for