Multiples files for classes

Hi
what is the most using method in java developpement ?
create 1 file for main and x files for class
or
create 1 file for main, and put all sub programs in the same things.
Thanks for you answer.
bob

your question makes no sense.
1 class per file, and as many classes as needed, just as the compiler tells you to.

Similar Messages

Multiclip on FCP 7 with timecode: multiple files for the same camera have different Angle

I have FCStudio 7 with OS 10.6.8
I just filmed a concert with 6 cameras (Sony XDCAM). They are all timecode sync'd.
For various reasons there are multiple vid files for each camera (i.e. 172_003 thru 172_006 for camera 1).
I imported into FCP 7 using SonyXDCAM plug in with no problems. Each camera file group was given its camera number as the Reel Name (i.e. Camera 1) and that camera's number as its Angle Name (i.e. 1).
Now when I try and create a multiclip using all six cameras, instead of keeping all the files for a specific camera under a single angle name it treats each file as its own camera angle. It treats each file as an individual camera instead of having the files flow as a single clip from a single camera based on their timecode. In viewer I have 8 different angles for a single camera (because of 8 files). In the make media window for multiclip, the Angle Name is different for each clip but its position is still aligned to its timecode.
I worked the same project last year and the multiple files for each camera lined up fine, based on its timecode value and camera/reel name. I can't see what has changed.
I need each camera's files to sync under that camera Angle Name, and for the files to play in the same angle spot in viewer.
All advice welcomed as I'm in a major time crunch to complete the job.
Thanks.

Well why not just prebuild each angle in its own sequence with sequence timecode matching the source timecode? Export with current settings and import these files back into fcp and then create your multiclip.

How can multiple files for the same genre be consolidated

I organize my iTunes files in genre folders for easy access. ITunes creates multiple folders for some genres and allows a single (preferred) genre file for other much larger files. How can I consolidate multiple files with the same genre?

Thanks. I've done what you selected. The problem is that despite all files being identified with the same genre, iTunes groups some genres in two separate folders. Thus, I have two "Country" folders, for example. More perplexing is that iTunes groups my largest genre folder, "Jazz", in a single folder.

PDF Maker in Excel 2003 prompts to save multiple files for one report

It seems each time i try to PDF multiple tabs I end up having to save more than one copy of the report in order to get all the sheets in PDF form. I then have to merge all the PDF copies into one file and save it. Does anyone know why it is generating multiple reports for the tabs in excel and how to get all the tabs to load as one PDF file from the get-go?

Jeffrey and Karen ... I've used Preview for years but recently upgraded to OS Snow Leopard (I am reluctant to change software!). I used to freely drag and drop pages from the sidebar one pdf file open in Preview to the sidebar of another - as you recommend - without problem. Now if I do that, the caption in the bar at the top of the document says "2 documents, 5 (or whatever) open pages", and I can't save the whole thing as one document - Preview wants to save the tranferred pages as their own document. What has changed? What am I not understanding here?

How to generate multiple files for each segment in the IDOC

Hi,
I have a IDOC with multiple segments, for each segment, a file needs to be generated,
There is only one target structure. Please let me know as to how do we handle this requirement in XI.
Regards,
Younus

Use multimapping in message mapping. Then map the Idoc node to the Message Type of File.
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
Regards,
Prateek

How do I design a Process for resizing multiple files for Premiere Elements

Hi
I am trying to understand how best to resize my slide shows of still photos to export to Premiere Elements, to reduce errors in rendering, as advised on a separate discussion.
I understand I should reduce the resolution to something like the PE Frame Size, 720 by 576 for UK PAL.
I cannot do this on Files with pan and zoom
So I think this is what I do
Export a Collection to a file.
Resize all files in the folder to a new folder using the Process Multiple files command
On trying that I have the following questions
If I do it this way, the files in portrait orientation don't correctly resize to the size I want, so what do I do with a folder of mixed orientations? Do I do two passes, or rotate the Photos, or something else?
Now do I now have to reimport all these photos (the resized collection) into the Catalogue, create a new Collection, and then apply zooms in my Slide Show creation of this Collection. I really want to retain the original photos for printing quality so don't really want to take the originals out of the Catalogue. I will end up doubling the size of my catalogue?
Will the pan/zoom ones cause a problem to render in PE?
Thanks
Chris

I have PEv.8 on my machine now, but it is probably the same in v.5
In Editor, go to File>Process multiple files. In the dialog, on the right under "Labels" you should find "Watermark".
An alternative is to make a brush containing the information which you wish to impart. With a brush you can place it precisely in a locus that you desire, but this would be labor intensive for 400 photos. The brush would be retained among the other brushes, and it could be used at any time.

Tagging Multiple Files for Security Settings

Hello
I have a server 2008 R2 that I have to change 2000 Files under \Windows\System32 and 1700 files under \Windows\SysWOW62. I can tag files with holding down the 'Ctrl' key, but Right-Click properties on multiple files does not give me Security, Advanced,
Auditing or Owner, I have to do each file at a time
Is there any way to get multiple files and get the Security, Advanced, Auditing and Owner settings?
Thanks
b.

some suggestions for command-line tools:
icacls: https://technet.microsoft.com/en-us/library/cc753525.aspx
auditpol: https://technet.microsoft.com/en-us/library/cc731451.aspx
takeown: https://technet.microsoft.com/en-us/library/cc753024.aspx
lots of other ways to do it too, I guess, e.g. powershell, scripts, non-MSFT utils, etc.
If you must use Explorer, you could right-click the parent folder and apply the changes to all items and child-items, if that suits?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Creating executable file for class file

Hi,
Im trying to create an .exe file for my application. Is it possible?
I know that my program will become platform-dependent...

Thanks. I was hopping it wasnt so expensive... :)
Best regards.

ICR - Upload multiple files for same company code?

Hello,
I have a question regarding the file upload functionality for ICR.
The file has to be prepared in MS Excel and then saved as tab delimited, but MS Excel has a limited number of rows.
So ....if one of my companies needs to upload more than one file for the same process/period because of this number of rows limitation, would that be possible? How is it handled and how we do we prepare the system for it?
Thanks for your help.
Regards
Isabel

Hello Isabel,
Actually this question is not quite answered yet...
The problem is that during data selection you can only choose one file per company/seqnr. In your sceneario each file represents a data source. So you need to create one entry per file in FBICRC01010 (e.g. FBIC032). If you were to run data selection once and choose one file and then run data selection again and choose a different file, the data from the first file would be deleted.
And you can split up a document in the middle. ICR considers each data record individually. There is no balance zero check or anything - since you usually transfer individual line items anyway.
Best regards,
Ralph

How do I select multiple files for download at one time?

I'm trying to batch download 24 files at one time. Firefox will only let me select one file at a time for download. Is there a way around this?

try flash got and DTA plugins

Processing Multiple Files for more than 100 Receive Location - File Size - 25 MB each file, file type DML

Hi Everybody
Please suggest.
For one of our BizTalk interface, we have around 120 receive locations. We are just moving (*.dml) files from the source to destination without doing any processing.
We receive lots of files in different receive locations and in few cases the file size will be around 25 MB and so while moving these large files, the CPU usage is varying between 10% to 90+% and the time consuming for this single huge file is around
10 to 20 minutes. This solution was already in place and was designed by the previous vendor for moving the files to their clients. Each client has 2 receive locations and they have around 60 clients. Is there any best solution for implementing
this with in BizTalk or outside BizTalk? Please suggest.
I am also looking for how to control the number of files which gets picked from the BizTalk receive location. For example, If we have say 1000 files in receive location and we want to pick at a time only 50 files only (batch of 50) then is it possible?
because currently it is picking all the files available in source location, and one of the process is dropping thousands of files in to the source location, so we want to control the number of files getting picked (or even if we can control to pick the
number of KBs). Please guide us on how we can control the number of files.

Hi Rajeev,
25 MB per file, 1000 files. Certainly you got to revisit the reason for choosing BizTalk.
“the time consuming for this single huge file is around 10 to 20 minutes”
- This is a problem.
You could consider other file transfer options like XCopy or RobotCopy etc if you want to transfer to another local/shared drive. Or you can consider using SSIS
which does comes with many adapters to send to destination system depending on their destination transfer protocol.
But in your case, you have some of the advantages that you get with BizTalk. For your scenario, you have more source systems (more Receive locations), with BizTalk
it’s always easier to manage these configurations, you can easily enable and disable them when a need arise. You can easily configure tracking; configure host instances based on load etc. So you can consider following design for your requirement. This design
would suit you well since you’re not processing the message and just pass it through from source to destination:
Use a custom pipeline component in the Receive Locations which receives the large file.
Stores the received file into disk and creates a small XML metadata message that contains the information about where the large file is stored.
The small XML message is then published into the
message box db
instead of the large file. Let the metadata file also contain the same context properties as the received file.
In the send port, use another custom pipeline component that process the metadata xml file, retrieve the location of the disk where the file is stored, access the file and send it to destination.
Read the following article on this design..
http://www.codeproject.com/Articles/180333/Transfer-Large-Files-using-BizTalk-Send-Side
This way you don’t need to publish the whole message into message box DB which would considerably reduce the processing time and utilises host instance to process
more files. This way you can still get the advantages of BizTalk and still process large files.
And regarding your question of restricting the Receive location to handles the number of files from receives location. No it’s not possible.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Purchase only Photoshop from CS5 with multiple licenses for class

Hello Adobe Community,
I am teaching a class of 24 students, and they are looking to purchase only Photoshop from the create suite for PC. They are a non-profit organization. I'm looking to see what the best option is for me and my class. Being a non-profit, funds are a bit tight so we are looking for the best solution for this. Any thoughts?
Thanks!
~Justin

Adobe does not sell CS5 anymore.
While I would certainly prefer Photoshop you may want to consider trying Gimp (freeware) for image editing.

Image Sequence...Cannot select multiple files for image sequence.

When I select Image Sequence in QT7 and navigate to the folder with the images, I am no longer able to select more then one image. Is the something that 10.6 has broken?
What am I missing?

If you only get the first file to import then I suspect the image files are not all sized correctly or the file names are not being recognized as "sequential".
I've done some tests to confirm this on my machine. File names with some using a _ (underscore) and others using a - (hyphen) import only the highlighted file. In another test I mixed in a single file sized just one pixel wider than all of the others and only the first file is recognized.

Safari4Windows: how to hilite multiple files for deletion

Am asking about Links/URLs in the 'Bookmarks' section on the left side (the caps title 'Bookmarks' below the Collections section and NOT anything IN the Collections section) . I have several hundred and can't take the time to delete each one.

Thanks Carolyn - that works for URLs within a *folder* which in turn is within the lower 'Bookmarks' section, but I mostly have individual URLs in that section (they got there by my dragging URLs off the desktop and they wont drag back again).
When I highlite one of them, it is of course deletable in the section to the right of the URL, but if I hold down CTRL and click on another URL, it will highlite but the one that was originally hilighted becomes unhighlighted. Nor can I Shift-click a second URL farther down the list and have all the intervening URLs highlite.
I tried uninstalling Safari for Windows, and reinstalling hoping all the subject URLs would not be there but the new copy of Safari apparantly finds a cache of the old data somewhere (cache.db does not seem to be on the Windows computer anywhere - even with the Develop menu enabled). I have not looked in the registry yet - mite try that. And during these experiments I have disabled syncing with the IPhone 4 (which also has all these unwanted URLs).
The saga continues !

SEPA file – how to create one file for multiple company codes

Dear experts,
My company has multiple company codes and they process automatic payments (F110) for multiple company codes in the same run.
The company wants to generate one SEPA file for all company codes.
In OBPM1 for SEPA format in the section ``Payment medium output devided by level of detail`` I unchecked everything (attached).
OBPM4 for SEPA format is showing `` No separation of payment medium output``.
Unfortunately, when I run automatic payments (F110) for multiple codes, multiple files for each company code are created.
Can anyone let me know how it is possible to create one SEPA file that will contain payments for multiple company codes?
Thank you

Hi Zara,
Please check in transaction DMEE your format tree (eg. SEPA_CT), 'DMEE tree: properties' - tab 'Sort/key field'. Is the Sort/key field 'ZBUKR' defined there with Level 1?
Please follow the recommendation of note http://service.sap.com/sap/support/notes/1742584
Regards,
Emöke

Multiples files for classes

Similar Messages

Maybe you are looking for