Mumble attenuation makes some applications quieter and quiter

Mumble has an attenuation option that makes other applications quieter while others are talking. I like this option, but I noticed that in some cases it ends up getting into a cycle of making things ridiculously quiet. I'm not sure exactly what applications it affects, but it definitely affects Chrome.
My guess is that it's caused by a combination of:
1. Mumble reducing all pulseaudio playback by 50% when someone talks
2. PulseAudio remembering individual application volume when you close/open them
3. Chrome starting/stopping new processes frequently for new tabs
So for example, someone starts talking so Mumble reduces all Chrome process volume by 50%. I close a tab while this is happening so PulseAudio remembers that the process was running at 50% volume. I reopen a tab and PulseAudio restores the 50% volume even though no one is talking. Someone starts talking again, so now that tab is set to 25% volume. If the same sequence happens again, it goes down further to 12% etc.
I have no idea how to solve this problem. Which program is to blame here? Mumble? PulseAudio?

I may have corrected the problem. It took several starts of iTunes, each time navigating to my podcasts and right clicking on 2-3 and unsubscribing from them before it went to 25%, became unresponsive, and required shut down from the task manager.
As soon as they were all unsub'd, iTunes went silent on CPU usage. The APSDaemon.exe shot up to 25%, but a reboot and a restart has everything quiet. I've accessed the store, played some songs, downloaded one. So far, so good.
I'll be back here to report any change.

Similar Messages

My ipod will damage the lock key and now serves this happened the day yesterday, I have not been dropped and has not suffered damage so far nungún that happens, also when I'm using some applications crashes and throws me of the application

my ipod will damage the lock key and now serves this happened the day yesterday, I have not been dropped and has not suffered damage so far nungún that happens, also when I'm using some applications crashes and throws me of the application
I want to know that I can do, plus I have an ipod shuffle first generation and I have not been able to use itunes because I required an update and this does not allow update

Is English you native language? If so please clarify your question. Otherwise post in our native language since your translation does not make sense.

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Mac got really slow after updation of os X and some application misbehaving and not able to open them.

Apply the combo update
http://support.apple.com/kb/DL1640

My iPod Touch 4g 8 gig keeps restarting randomly while I'm playing.. It makes some buzz noise and restarts, it's really annoying. What do I do?

I've just purchased this iPod Touch. I would turn on my ipod touch 4g, 8gig. Then I would play my music.. While playing it, it would continuously restart, and make some buzz noize. Charging it is a hassle too. Even right now for some reason it keeps charging, and un charging, charging, and un charging, repeatedly
What should I do? I can turn my music on right now, set it to autoplay, and it will continue to throw itself into the restart screen, and restart. Please help, thank you.

):

Problem with QT 7.0.4. Some Application crashes and this is why ..

... because some applications using QTMovie in threads and somehow Apple has disabled this feature and throw an exception if the application tries to initialize QTMovie in a thread.
An uncaught exception was raised
QTMovie class must be initialized on the main thread.
* Uncaught exception: <QTMovieInitializedOnWrongThread> QTMovie class must be initialized on the main thread.
This morning a lot of user send me feedback and crashlogs after updating to QuickTime 7.0.4.
i hope that Apple will release a bugfix, so that we ( the developers ) will not have to rewrite our applications. I don't know why Apple has disabled this, i think they have huge problems with the second Core from there new Intel DualCore machines.
Best
Sven Janssen
iMac G5 20' iSight Mac OS X (10.4.4)

Earlier this week, I posted a complaint against Quicktime 7.0.4 causing really bad jerkiness in video playback and in Front Row animated menus. I had the Windows Media Plugin "Flip4Mac installed". I just noticed that Flip4Mac has posted a new version of their plugin yesturday to correct incompatibilities with Quicktime 7.0.4. After experiencing instbility with Quicktime 7.0.4, I uninstalled using the Apple uninstaller to revert back to 7.0.1, I then upgraded to 7.0.3 and all my issues were gone. Once I saw that Flip4Mac had posted a new version of it's plugin to correct incompatibilities, I was curious if this plugin was causing my issue so I re-installed Quicktime 7.0.4 and sure enough, my video playback became unstable again. I then went to macupdate.com and downloaded the newly released Flip4mac plugin for Quicktime. Sure enough, video playback was good again. I think the whole cause of the bad video issue after installing Quicktime 7.0.4 was due to the older version of Flip4Mac being installed. Just thought this might help some of you and also the Apple developers.

My application hangs and quit when it was loading crystal report Exception Offset:00007c72

I'm sorry if i post this discussion at incorrect Space(or Forum).I'm appreciating your patient .
I installed my application on PC-client Win7 ; and when he was trying to view the report an error raise the application encountered a problem and needs to close.
I noticed the application crash when it was trying to execute the following line of code(VB.Net)
Report.Database.Tables(0).SetDataSource(ConstantDataSet.DataSt.Tables("ConfigFile_SelectRpt"))
( more details
Dim Report As CrystalDecisions.CrystalReports.Engine.ReportDocument
ConstantDataSet.DataSt.Tables("ConfigFile_SelectRpt") is data table contains data
Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: OrganizationSupporter.exe
Application Version: 1.0.0.0
Application Timestamp: 50a52b98
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.21824
Fault Module Timestamp: 4e797cdd
Exception Code: e0434352
Exception Offset: 00007c72
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I'm highly appreciating your help and cooperation.

Correct, you are using the beta version of the runtime.
Search here on how to remove version 14 and use the RTM release version 13.
Thank you
Don

Safari can't connect to server on only some applications (lumosity) and only under parental controls

Under parental controls with the "try to limit access to adult sites" selected, some sites (such as lumosity) give me the can't connect to Safari screen,
while others (facebook, twitter) give me a form to fill out screen, rather than the home page.
Other websites work just fine.
When I use my own login, all of the sites work just fine.

Hey Nana1048,
Thanks for the question. I understand you are experiencing connectivity issues with your iPad 2. The following resource may help to resolve your issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
1. Be sure you're in range of your Wi-Fi router (access point).
2. Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
3. Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
4. Restart your iOS device.
5. Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
6. Tap and Forget this Network.
7. Try to connect to your desired Wi-Fi network.
          Note: You may need to enter your Wi-Fi password again if your network requires one.
8. Turn your Wi-Fi router off and on. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
9. Update your device to the latest version of software.
10. Update your Wi-Fi router to the latest firmware. For AirPort Base Stations, install updates using the AirPort Utility.
Wi-Fi disconnects or signal strength is less than expected
1. Move closer to the Wi-Fi router (access point).
2. Check for sources of potential interference.
3. Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
4. Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
          - previously connected Wi-Fi networks and passwords
          - recently used Bluetooth accessories
          - VPN and APN settings
Thanks,
Matt M.

Symbian S60: Make some applications memory residen...

Now I know this is a simple question but I figure most people are pretty switched on in this forum so should be able to help me quite easily.
I have a Nokia 5500 sport with symbian S60 I believe running on it. Now the OS is horribly slow at loading the alarm clock and contacts, takes 6 seconds for the alarm and maybe 2-3 for the contacts.
If I open the alarms, then the main menu and click alarms again, it loads instantly. I imagine this is because I never pressed exit and it was still resident in memory. Now I do not run many apps, basically just the essential stuff like SMS, contacts, alarms and contacts, I imagine all of these apps would fit in memory at once quite easily, is there an option to force apps to stay resident? Or perhaps instead of having 'exit' change the button to be 'home' so that they stay running in the background?
I'm sure what I want to do is possible, I am just not sure how to do.
Thanks in advance.

There is no red button?
Also RAM is there to be used, I don't really see how it would slow the phone down providing there is enough RAM available to load all future apps.
When I manually add up contacts, sms etc it is well under the total available ram.
What does the red button normally do? Perhaps I can do it manually another way?

Apps open and quit slower in one admin account than in another

On the same computer (iMac 27" Late 2012, 3.2GHz Core i5 8GB 1600MHz) running the same OS (10.9.2), some applications open and quit much slower within one admin account than another. SPSS 21 for Mac, for example, takes 6 mins 30 secs to open and 3 mins 40 secs to quit in one admin account, but takes only 1 min 8 secs to open and 6 secs to quit in another admin account. I have already deleted the SPSS journal file specific to each admin account, and it doesn't help. I first thought that the problem was specific to SPSS, but now it appears that other applications also open slower in one admin account than another (although the problem is not as bad with other applications).
Is there a reason that some applications open and quit much slower in one admin account than another? If so, how can I fix it? Thank you.

Hi,
Make her account an Admin Account.
A Managed Account and Parental Controls tend to be somewhat linked and a sliding scale of things.
If there is no reason to Manage her account there is no reason why she cannot also be an Admin account.
She should also Check iChat > Preferences > Accounts > Security and see who is in the Blocked or Allowed Lists and see if you are in the wrong one.
8:00 PM Monday; April 5, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Workflow status is missing from the List after make some change in workflow

Hi,
We have this strange situation where the workflow status is missing from List views. Here is the situation:
Now if I check the All List view of this list, I can see these workflows that shows the status of the workflow - say "In progress", "Completed" etc.
When i make some workflow modification and after i save and publish. The workflow status in List will missing.
This issue happening is intermittent.
Why does this happen?
Any workaround/findings for the above scenario are much appreciated.
Thanks
JWei

Hi JWei,
The workflow status column gets created when you first create the workflow and its first instance runs. The columns gets removed (and disappears from the view) if you delete the workflow or remove all instances of the wf on the list.
Please check whether you created some lookup columns in this list. If yes, please increase the lookup threshold for that web application in Central Administration.
Please create a new view which only contains the Title column and Workflow Status column, modify the workflow, check the workflow status column in the new view, compare the result.
Please create a new list, create a workflow, and test again, compare the result.
Please check if the link below is useful for you:
http://naimmurati.wordpress.com/2013/11/11/workflow-progress-column-missing-in-a-document-library/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Xfce4 fonts are too big for some applications

Hi there,
overall, my fonts are just fine. However, in some applications (panel and thunar from what I've noticed so far), the fonts are about twice as big. I assume those are applications which are started quite early.
I'm on a 4k monitor, xfce4 desktop environment, dpi set to 96 in the xorg conf.
Any ideas are appreciated

I have done both, doesn't fix it unfortunately
EDIT:
I just tried AGAIN and it worked... Dont understand why but its fine now. For everyone wondering:
- disable custom dpi
- close appearance
- enable again
- restart
is what worked for me.
Last edited by yorrd (2015-06-17 07:49:00)

I have a series problem in the safari application it was quit unexpectedly and i can not open it even after i click reopen in the pop uo message that apears to me please help me to make it.

how can i open an application that was quit unexpectedly?

If you have another browser installed:
1. Download and use free AdwareMedic to remove the adware
    http://www.adwaremedic.com/index.php
    Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
    Once done, quit AdwareMedic.
2. Safari > Preferences > Extensions
     Turn those off and relaunch Safari to test .
     Turn those on one by one and test.
               or
    Remove the adware manually by following the “HowTo” from Apple.
    http://support.apple.com/en-us/HT203987
If you don’t have another browser installed:
Startup into SafeMode, log into your account, open Safari
and download AdwareMedic or the removal instructions from Apple.
* How to start up into Safe Mode?
Shut down the computer.
Press the power button. Immediately after you hear the startup sound, press and hold the Shift key.
The Shift key should be pressed as soon as possible after startup,but not before the startup sound.
Release the Shift key when you see the Apple logo on the screen. Startup will take longer than usual.
Launch Safari. Proceed with the removal of Adware.
1. Download and use free AdwareMedic to remove the adware
    http://www.adwaremedic.com/index.php
    Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
    Once done, quit AdwareMedic.
2. Safari > Preferences > Extensions
     Turn those off and relaunch Safari to test .
     Turn those on one by one and test.
               or
    Remove the adware manually by following the “HowTo” from Apple.
    http://support.apple.com/en-us/HT203987
Once done, click  in the menu bar and choose “Restart”.
* Source: http://support.apple.com/kb/PH18760

Some applications relaunch themselves automatically after I quit them

Certain applications will relaunch automatically after a few seconds after i quit them (CMD-Q or Application menu, Quit).
This happens on a new Macbook Pro retina 13 inch restored from a Time Machine backup of my Macbook Air 11 inch. The behaviour is not present in the Macbook Air.

It seems that you are Turkish as me But I will give my answer in English so that it can be helpful for others facing same problem.
I've faced same problem after latest firmware upgrade. It seems that latest upgrade has compatibility issues with Java applications, since I don't know whether you realized or not, the applications that are not working are java applications. I didn't try yet but a hard format may be a solution for this problem. Also we have to inform Nokia Support Department about that issue and they must make some improvements about that problem.
Good luck
My Nokia history:
3110-3210-3310-3330-5210-6110-6210-6630-5510-1600-6330-E50-E55-2690-E72

My software applications were unexpectedly quitting (i tunes, pages, skype) so I upgraded to Lion OS 7. It took 2 days to download, 14 hours and counting to install so I switched it off and on. The only result is a screen asking for my password. I key in

My software applications were unexpectedly quitting ( I Tunes, page, skype) so I downloaded Lion OS 7. It took 48 hours to download and 18 hours to install (and counting) so i turned it off and on several times. All i get now is a screen with the Apple Icon asking for my password with option to switch off or restart. tried both but it just brings me back to the same screen
what do i do?
thanks

When you decided to upgrade because you were having serious problems, you jumped from the frying pan into the fire. If the problem was the system, then reinstalling the current system is the way to go. But you had several application quiting, some from Apple and some not. so the quitting was something affecting all of them, and of course the system could be the culprit, but the system is not the only possible culprit. Replacing the system when it was not the problem only buries the problem under a whole new pile of problems.
Before reinstalling a system you need to make your Mac as trouble free as possible and back up as much as you can. There is a wide variety of problems that can affect many applications. Here is a short list:
Font problems. Use Font Book to verify your fonts. Delete or disable bad fonts.
Disk, permission, or cache corruption.
Incompatible Startup Items, Login Items, interface modifications or menu extras.
Corrupted preferences other than those of the affected applications. Check preferences system-wide using the freeware applications Preferential Treatment or AppleJack
Insufficient RAM or lack of free disk space.
Programming errors. Bugs in application code are not uncommon. For third-party applications, check the vendor's Web site for updates to the application, reports of known bugs, or for information on how to contact the vendor for support. A bad program might be grabbing up too much RAM and causing the other applications to fail as well.
Corrupted application. Check the logs to see where the crash occurred.
Other software problems or conflicts.
Corrupted Mac OS X installation. Perform an Archive and Install of your current Mac OS X.
Hardware problems. Run the Apple Hardware Test that came with your Mac.
Try to discover the culprit:
Open Console, located in the Macintosh HD > Applications > Utilities folder.
Check the Console and System logs for messages that may be related to the problem.
To open these logs, in Console choose File > Open, then choose:
Open Console Log and Open System Log
Messages in these logs are time stamped when the message was logged.
Scroll the log windows to the approximate time when the problem occurred.
Details of the messages may provide additional clues you use in troubleshooting.
Do not post an entire log to a forum. Post only the messages referring to the function or application causing a problem.
AppleJack is a free program you run in 'Single User Mode.' Install it. When you want to run it, press Command s until you get a black screen with text. Type 'applejack' and run the repairs.

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Mumble attenuation makes some applications quieter and quiter

Similar Messages

Maybe you are looking for