Must have the same type and the same length
hi experts,
DELIVERY_PLANT data type STRING //from proxy class, can't be changed
BEGIN OF ty_citem,
article type matnr,
werks type werks,
END OF ty_citem,
LOOP AT it_items INTO lv_item.
lv_citem-article = lv_item-article.
lv_citem-werks = lv_item-DELIVERY_PLANT.
APPEND lv_citem TO GT_citem.
clear lv_citem.
ENDLOOP.
SELECT matnr werks
from marc
into table GT_marc
for all entries in GT_citem
where matnr = GT_citem-article and werks = GT_citem-werks.
error message here:When you use the addition "FOR ALL ENTRIES IN itab", the fields "WERKS"
and "GIT_CITEM-WERKS" must have the same type and the same length.
Hi,
You know for statement FOR ALL ENTRIES in where clause data type and length should be match.
As per my understanding ,here GT_citem-werks is a string. But you know data type of WERKS_D is char with lencth 4.
Use the below select statement.
SELECT matnr werks
from marc
into table GT_marc
for all entries in GT_citem
where matnr = GT_citem-article and werks = GT_citem-werks+0(4).
Thanks.
Subhankar
Similar Messages
-
What is the matrial type, and the view are..
hi .export , what is the martial type, and the view are..
please briefly explain it ,
thanks
shivDear Samal,
Material Type:
A grouping together of materials with the same basic attributes such as raw materials, semifinished products, or finished products.
All materials must be assigned to a material type which determines:
Whether the material is intended for a specific purpose such as a configurable material or process material
Whether the material number can be assigned internally or externally
The number range from which the material number is drawn
Which screens appear and in what sequence
Which user department data you may enter
What procurement type the material has; that is, whether it is manufactured in-house or procured externally, or both
Views:
Freely definable text describing the logical screen in the screen sequence in more detail.
Regards
Utsav -
Link between output type and the email id in me22n ?
Hi,
Can anyone plz explain the link between the output type and the email id maintained in the address data in ME22n ?
The output type is configured fo rsending Email .Whenever i maintain the email id in the address data the outptu type gets triggered automatically but if I leave it as plank the output type does not get triggered.
Can any one explain this dependency?
thanks in advance
regards,
AshwinHi,
It depends on the output record that you have used, what is the key?
It is no different that printed POs where the Printer Id is not specified in the communications tab of the output record. If the systen can't find where to send the output to it will not generate the record.
If it did generate the record without the email address, what would you expect to happen? Where could it send it?
It is far better to get the warning message "unable to determine ......" that to simply save the PO without the email addrerss.
So I would simply see the warning message as an indication that the email address is missing and fill it in before saving.
Steve B -
I must have done something inadvertently and now if I have more than one application open, the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?
Hi Jan, Almost sounds like Expose or Spaces....
http://support.apple.com/kb/HT2503 -
I was typing in a word for Mac document and I hit the apple key and the numeral 8 at the same time now all of my documents have these strange symbols please help
Simply type command 8 again. That toggles the "show paragraphs" function.
-
I hit the apple key and the numeral 8 at the same time now all of my documents have these strange symbols please help
Simply type command 8 again. That toggles the "show paragraphs" function.
-
So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as. -
I have an e printer and the printer is on the same network as the iPad. When I attempt to print from the iPad I get a message no printers available. How can I get my iPad to recognize the e printer?
This printer has worked for me with out fail at my house. I am traveling in an RV and am at the mercy of the RV Wifi. I do not have access to the router. The printer has been recycled a number of times as well as the Ipad. The printer is set up and has access to the wifi. It seems to me that the Ipad and Iphone are not recognizing the connection with the e printer. I was hoping there was some adjustment that could be made to the Ipad and Iphone. I can email to the printer from both gadgets. I will try to recycle the devices again.
-
I have Apple TV version 7.4.2. We read in a blog that in order to reset our Apple TV we should press the menu button and the select big button at the same time which we did. Now when we attempt to turn on the apple tv box it with the remote we get a white light and sometimes we can get the menu screen but the remote will not let us move now will it allow us to turn the apple tv on or off. If we just leave it alone, the white light eventually goes away. I did unplug the apple tv and we removed the batteries and reinstalled them from the remote and that did not make any difference. Please advise.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore. -
I disabled my iPhone 4 and while doing a restore via iTunes, it is downloading and timing out so the download is not completing. any idea how to get past that? I have tried many times and the same error keeps happening.
You need to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
Sorry, you've already lost all data on your phone. -
when i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ??? please i need help with this and how can i fix it
Here is some pertinent information and how-to's from Apple:
http://support.apple.com/kb/TS2570
Post back if these troubleshooting steps do not work. -
I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.
See the following thread on the same topic:
2 Thunderbolt displays MBP = sound coming from both displays? -
my iphone 4 stopped working suddenly....it wouldnt charge or anything...i was told to push the on button and the home button at the same time and it came back on.
is this a fault with the iphone????
i cant have my phone switching off randomly...any help please...thankyou.sometimes it happens, a hard reset will sometimes solve the issue.
If the issue starts happening more often, I would consider restoring the device to factory settings to install clean software. If the issue still persists after that, the device might need a hardware repair.
More info on backing up and restoring the software: http://support.apple.com/kb/HT4137
Good luck
Stijn -
When I try to back up my Iphone, I get a message that My Iphone can not be backed up on my computer. My computer is authorized and I have been successful with this in the past. I uninstalled Itunes and reinstalled the lastest version and the same problem occurs.
If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.) -
I have updated my billing information and still can't update my existing apps , i ahve changed the payment card and still same problem ,what shall i do ?
It's a credit card, not a debit card ? As far as I know that message will show if you are trying to use a card that was not issued by a bank in the same country as where your iTunes account is based (and you need to be in that country). If you are sure that it is then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Maybe you are looking for
-
RPE-01008: Recovery of this request is in progress in process flows.
Hi, I am calling shell script as an userdefined activity in a process flows. All the process flows were working fine. Today, all the process flows wherever the shell script is called ended up with an error showing " RPE-01008: Recovery of this reques
-
How to create a RAR for deployment?
I am using SOA Suite 11g. I am a newbie and try to create a simple web service that will invoke a simple sql query to the database. In my BPEL composite, I used the "Invoke" activity to execute a simple sql query using a service created via the "Data
-
PDF file to be attached in mail .Showing error in opening the Document .
Hi ABAP Gurus , Good Morning ! I converted a smartform to PDF and sended to function SO_NEW_DOCUMENT_ATT_SEND_API1 to send a mail external... So, when I tried to open the file attachment, I can't open this file. and I watch a message : 'There was a e
-
SMC 3.6 can not detect A5k module
Hi All , I just install smc 3.6 on solaris 10 special for monitor A5k + zone , on pdf say if i want see a5k module i must install SUNWluxox , any body know abaut the package ? because the patch release only support solaris 8 and 9 ?. thanks
-
I currently have CS3 suite and have been happy running it on my vista 64bit for a few years now. I have got to the stage where CS5 seems to have some tools I would like to try. Now my questions are:- Now if I install a trial version of CS5 will it in