Muvo V 100 2GB problem

Hi
Can't seem to solve this problem I have with this mp3 player. When I first got it I vaguely remember when I turned it off and on again it used to remember which song it was playing and returned to it next time. Now I turn it off and back on and it returns to the first song in the list. I haven't been able to listen to some of the songs for months now .
I checked the settings; play mode is normal, can't seem to find any settings about this.
Any help?

Hi,
You might want to check for the following:
Play Modes:
- Repeat Track
- Repeat Folder
- Repeat All
- Shuffle Once
- Shuffle Repeat
- Shuffle Folder
- Track Once
- A <-> B
Ensure which music folder you are using when playing back the music eg. "Repeat Folder" will play all the music in that folder, and not another. This may explain your statement "I haven't been able to listen to some of the songs for months now".
Protected Music:
I'm not sure if you have any songs or songs purchased online in .WMA (Windows Media Audio) format; these are usually encrypted with DRM (Digital Rights Management) and your player can only play them if they are of the DRM 9 version. If you are unable to play these songs even though they have a DRM 9 license, do the following:
Remove the song from the player and transfer it again to the player using an application, such as Windows Media Player or the Creative application that came with your player.
To view the DRM version of the songs, play it in Windows Media Player; Right-Click on the title. Select Properties and observe the audio codec under the General tab eg. Windows Media Audio 9.1 means it is encrypted with DRM 9.
Alternatively, contact the music provider where you have purchased the song from and verify with them on the license version that came with the music file.
You've not mentioned your Operating System; you may try to download the last drivers/firmware for the player here.
Regards,
Colin-CL

Similar Messages

Creative MuVo and Nforce2 USB Problem solved??

http://www.nforcershq.com/forum/viewtopic.php?t=12499
Posted: Mon Apr 07, 2003 12:43 pm Post subject: Creative MuVo and Nforce2 USB Problem solved??
Creative released a official firmware for MuVo, and according to them
Fixes
Improved USB file transfers for computers with NVIDIA® nForceTM1 or 2 motherboards.
Better playback performance when more than 128 music tracks are in the player.
Uninterrupted playback for high bitrate (192 Kbps) WMA files.
Smooth playback for WMA files even at low battery levels.
Improved Previous/Next Track function.
Player may be turned on even when its memory is full
http://www.nomadworld.com/downloads/drivers/welcome.asp?region=2&LangID=1033&OS=10&prod=437&Select=Get+Files&x=47&y=11

Quote
Originally posted by axeluktoo
Hi,
Good explanation of FSB Spread Spectrum here:
http://www.pimprig.com/forums/archive/topic/7581.html
From what I can make out, it\'s basic function is to help prevent your machine from interfering with other electronic devices (such as TVs, Radios etc.)
Hope this helps!
Axel :D
Thanks for the link.
It does say in there that it does tend to mess up the clock. Also why doesn't the VIA boards have this option?
BioHaz

Suddenly I can't send to more than about 25 people in one email. I used to be able to send to 100+, no problem. What happened?

For years I have sent an email to all teams in my cricket club by simply adding each separate group list to the 'cc' or 'bcc' list and pressing send, thus sending the same mail to 100+ people simultaneously, no problem. Suddenly the system says I am trying to send it to 'too many recipients'. I even had to split some of the group lists in to two separate group lists because it seems that the maximum number of people I can send one email to is now about 20 people. This is a problem especially that sometimes players would comment on the email and wish to include everybody in the club, so would use the 'reply all' function. Now they can only reply to those on the same email list as them, which sometimes isn't even all of their own team...
Club leaders are on more than one of the team lists, so some people now have to receive the same email in their inbox up to 5 times due to this problem.
There were no changes at all made to anything else with my system: same server, same computer, same emails, same everything. It just happened one day to the next.

Any limit is imposed by whatever SMTP server you use. So talk to your email provider.
With that number of recipients it would probably be a good idea to look for a mailing list service.
http://www.idealware.org/articles/fgt_email_newsletter_tools.php

Satellite P775-100 3D: Problem with first initialization of the 3D function

Hi,
I have a problem with my new Toshiba Satellite Notebook P775-100 3D.
Wenn I start the 3D wizard for the first 3D using, then disappears the mouse coursor from screen.
The mouse works but is not visible. Sometimes by trying can to find the button "continue" or a checkbox.
Unfortunately, I can not get the wizard with nonvisible mouse cursor until to the end.
The Keys e.g. TAB, Coursor-keys etc. from Keyboard helps not more.
Please has anyone a Idee for the solution of my problem?
Many thanks.

Hi,
It now works but I do not know was the problem was.
thx

MuVo TX FM shuffle problem sol

Just letting MuVo TX FM owners know. The latest firmware, .8.02, solves the shuffle issue of not playing everything in the device. I think this is the firmware upgrade we've (well, I've) been waiting for. A bit tricky to install (never did recovery before) but worth it.
I have around 400 tracks on my 52 MB, spanning 8 folders. Before, "shuffle once" only plays songs from certain folders and ignores the rest, usually favoring the first half. Well now it plays songs from all folders. I've yet to see if it ignores files, but when I tested it, the shuffled songs pretty much span the whole playlist (I got songs in the beginning, end, middle, etc).
Probably will take a couple more test runs to see if it works fully, but there's definite improvement in any case.

Cat,
I must disagree with your description of Sparkhawk's issue. That may be what is supposed to happen, but it is certainly not is what is actually happening.
I have a MuVo TX 52 (Firmware:.0.05). I've got 53 tracks on the unit in 4 directories.
The problem I get is as follows:
If I set it on Shuffle (Repeat or once), it will start okay. However, if I turn the unit off and then back on again later, it will do the following:
) It will play the remainder of the track playing when I turned it off
2) It will then always play the same tracks in the same order.
If I follow your advice and set it to Normal and then back to Shuffle (once or repeat), it will play one track and then resort back to exactly the same tracks in the same order as before.
The end result of this is that if I use the player for 30 minutes spells (as I do), then I get the same half an hour of music over and over again.
This happens whether I actually listen to the tracks or shuffle through them. All in all Shuffle mode is completely unuseable as it just plays the same stuff over and over again as it appears that having turned the unit off, it forgets where in the playlist it had got to!
Any suggestions?
Scotedog

100% width problems on iphones

I have a layout with an accordion which I'm trying to get to work correctly on iPhones. The problem I have is that when viewed in Safari on the phones, there is horizontal play (the pages moves a lot with a side to side swipe gesture). To get around this issue, I implemented several changes including:
Change the text box width from 360 px to 95% in the CSS files (If I do 100%, some characters can get cut off by the scroll bar on the right)
Change the viewport from 380 px to 320 px in the CSS files (This prevents the horizontal play on iPhone 4-5S)
Add <meta name="viewport" content="width=device-width"/> to the html files
This workaround was ok but with the introduction of iOS 8 and the new iPhone 6 and 6+, the higher resolution is throwing everything off. I think the issue is that the viewport is greater than 320 pixels. This is making my design off-center and with play.
Any ideas how to work around this? I need a layout that will only allow vertical scrolling and look good on both iOS 7/8 and iPhones 4-6+.
Sang

Hi Zak,
Thanks for the reply. I'm confident that there are no protruding objects outside the width of the pages. The page content is pretty straight forward. The master page has a color background and a vertical menu nav. The content pages have just an accordion object. It displays fine without any issues in browser desktops, but on mobile safari the behavior is different.
Unfortunately I have to modify the text box width because unlike the accordion object, the text boxes inside of it won't resize based on the device width.
Sang

100% scaling problem with datagrid

I have a situation where I have an AdvancedDataGrid in an hbox . I have a checkbox called scrollTable that changes the width of the AdvancedDataGrid
<mx:HBox height="100%" id="gridWrap" width="100%" >
<mx:AdvancedDataGrid
if(scrollTable.selected){
                        deals.width = 2200;
                    }else{
                        deals.percentWidth = 100;
                    gridWrap.validateSize();
Everything is contained in a panel with a fixed width set by the user. The behaviour I want is for just the hbox to have scroll bars when the AdvancedDataGrid is given a size of 2200 , not the outer containing panel to get scrollbars and the hbox expanding inside the panel. I suspect that the problem is because the hbox has 100%, which is what I need because the user can resize the panel.
Hope someone can help
thanks

The quickest solution is to:
1) Change the model variable to:
public var _xlcDg:XMLListCollection
1) set resultFormat="e4x" on the HTTPService instance
2) in the handler, do:
var xmlResult:XML = XML(event.result);
trace(xmlResult.toXMLString()); //to see what you have
var xlPersons:XMLList = xmlResult.person; //you can use the
XMLlist directly, but it is not best practice
trace(xlPersons.length); //what you expect?
_xlcDg = new XMLListCollection(xlPersons);
If you want an ArrayCollection, create a class to be your
value object, then loop through the XMLList and create a new
instance of the VO, assign the propderty values form the xml node,
then addItem() to put it in the array collection.
Tracy

On Google, Ffox 3.6.12 only shows 10 results even when I specify 100; Mac G4 10.4.11; other browsers show 100 no problem.

On my Mac dual 1.25 GHz Power PC G4 with OS X 10.4.11 and Firefox 3.6.12, when I open Google and specify 100 results like this...
http://www.google.com/advanced_search?hl=en&num=100
...it always just shows 10 results. Whereas Opera and Safari (I don't use Internet Extorter) show 100 results no problem using that same URL.
Problem has being occurring at least since Firefox 3.6.9 if I recall correctly. Not sure if it was happening before that.

Google recently made some changes to the Google search site with the addition of Instant search and that made the setting of the number of results in the Google settings to stop working.
If Instant search is enabled on the [http://www.google.com/preferences?hl=en Google Search settings] page (link at the top right) then you only get 10 results.<br />
You have to disable instant search and reload the result page and then set the number of results to your preferred choice.<br />
It may not work if you make both changes at the same time.
There is a link directly to the right of the Google search field on the Google results page.<br />
That is a button with a drop down list: Instant is On/Off.<br />
There is also a radio check box on the Google Settings page, that has replaced the previously used Suggestions.
* http://www.google.com/preferences?hl=en

Java Programming, 100 locker problem

hello i am intro to programming in java.. i have a problem from my teacher. 100 lockers are all open in an array. 1 person goes in changes all to closed. 2 every other. 3 every third, 4 every fourth and so on until 100. could some1 give me a walktrhough for some help. i understand i have to create the array. and i understand 0= open 1= closed. n= 1 (student).. n++ but other than that i am kind of stuck!.. any help and i would appreciate it.
thanks!

thats that helps alot.. could you help me decode some of this code i found into english so i can write my own version so it is not plagurism.
public static void main(String[] args) {
boolean [] lockers = new boolean [101];
     for(int i = 1; i < lockers.length; i++)
          lockers[i] = true;
for(int i = 2; i < lockers.length; i += 2)
     lockers[i] = false;
for(int i = 3; i < lockers.length; i++) {
     for(int j = 1; j < lockers.length; j++) {
          if(j % i == 0)
               lockers[j] =! lockers[j]; }}
System.out.print("Open lockers: ");
     for(int i = 1; i < lockers.length; i++) {
     if(lockers)
          System.out.print(" " + i);
               System.out.println();

DDTS-100 Squeelching Problem

Hi, I have a problem with my DDTS-100 and i can't seem to find a solution anywhere. I'm Using the Promedia 5. with them. My problem is whenever i play music, watch a movie, or play a game the DDTS-100 emitts a squeeling sound from the front left and right speakers. when i play somthing louder, the squeelch is much more noticable and very annoying. I upgraded from the Promedia DD5. so i could get prologic II and DTS:neo6 support, which works really well by the way, but i never had this problem on the DD5.. If i hear the squeeling, i can pause the music or dvd or whatever and it will still make the noise. when i mute the DDTS-100, the squeeling stops instantly which shows it is the DDTS making the sound. if i turn off mute, the squeelch is still off until i unpause or music or movie again. then the squeelch starts up gradually, but quickly like this: ssssqqqquuuuuueeeeelllllcccccHHH. i'm pretty sure its not an electrical interference since if i plug coaxle from my dvd player and my xbox together i get a hum, which is differant from what i'm talking about. so its not so much a hum, but a squeeling. lol sorry this post wasn't very organized. but i really need help on this one. Thanks in advance.
-Brian

ronmojohny wrote:
(as I stated in the first post, I'm not using a computer or compuert speakes) I have an expensi've McIntosh system with Klipsch speakers and a Klipsch powered subwoofer.
Oh yes, sorry. The crossover is in the computer soundcard settings which of course, you won't have.
To test the sub you could try connecting another channel to the sub input, say the centre. If you hear the bass component of the centre channel at a decent volume level then you know the problem is not with your amp/speakers but with the ddts-00. If this is the case, then I think you should contact technical support. If you look here,http://forums.creative.com/creativel...message.id=722, someone is having a similar problem, but they clearly say that the subwoofer output on the ddts-00 works fine with movies, so maybe yours is faulty.
EDIT:
I've found an examle of a crossover that is designed for 5./6. systems. I have posted a link to it in the above thread.Message Edited by pjc on 04-8-2005 0:32 PM

Photoshop Elements 13 won't get pass account logon - error 100 Network problem

I Purchased and am trying to install Photoshop Elements 13 on my WIN7 machine. I have been using Elements 9. I get to the point of responding to the Login request in the installer and get the failure message "Error 100 - Error communicating with Adobe.com. Check your network connection and restart Adobe Download Assistant".
I have tried using IE11 and Firefox 33.1 browsers, same error. Based on another troubleshooting post I also cleared CACHE, same error. I have tried using the DVD that came with my purchase as well as downloading the Trial - same problem. I am able to logon directly to the Adobe.com website using my id and password so I know that works. And I was also able to register my product using the serial number, so I know that is good. What next?

check this link, Sign in, activation, or connection errors | CS5.5 and later
and if checking your hosts file etc fails to reveal the connection problem, contact adobe support, https://helpx.adobe.com/contact.html

Muvo Sport C100 Serious Problem

My Muvo sport c00 player it`s almost dead...when i turn my player on,i get this message " file system error"...the player has 256 Mb memory...i tried to format the dri've with FAT file system and worked , but i can`t copy any songs on mp3 player, i think the disk dri've is broken...can anyone help me? updating the firmware has no effect ...doeas anyone had this problem woth muvo sport c00 player ? and i bought it 5-6 months ago ( ...if u have a solution ,please reply...thanks

I have the similiar mp3 player. The software goes grazy frequently (shutting down and not turning on anymore), and the sollution have been reinstalling the firmware. But now i changed to vista and the update program does not run even in compatibility mode?When creative is doing a firmware updater with vista support?

MuVo TX 256 mb - problem with power

After week after I bought my mp3 player, MuVo going off when I turn it on.
First on the screen show up message "Creative", after while "MuVo" and then player going off. I formated MuVo but this isn't support my problem.
I don't know what to do. I tried upgrade firmware but i have WIndows 98 and I can't find version of update for this OS.
What can I do? Send player to shop?
Greetings from Poland and sorry for my language, I didn't learn English ...

Thank You very much. I contacted with Polish Creative customer-support, and I've ugrade my MuVo - it's work now. )
Sorry for trouble and my language, it's good then someone understand me.
Greetings from Poland!

KT4 ULTRA / Promise Fasttrack TX2 100 RAID problems

I have my decided to retire my old MAXTOR and get 2 WD800JB for my new Promise Fasttrack TX2 100 RAID card. I set the RAID and stuff up everything is working fine but first I realized that my RAID benchmarks are low. I tried different stripe sizes(16/16 - 64/64), drivers and even tried both drives independent on different chanels RAID card.
I was still using old installed OS from my old HDD and I decided to install new OS on RAID 0 array and see how fast it boots up. I installed windows properly no problems but when I restart the system without WinXP CD in the CD drive RAID card did not boot up, I was getting an error message saying "error booting from the previous device" but when I put WinXP CD back in after cd boot screen it boots from RAID drives.
My RAID System;
KT4 ULTRA SR
Promise Fasttrack TX2 100
2 x WD800JB
here is my question; do you guys know any issues between KT4 ULTRA and Promise TX2 card. If no I'll get another card and see if there is sth wrong with this one.
btw my system is working fine!!!!

1 got the wd drives either jumperless........stand alone master or cable select
on the black end of the ide
2 have you set scsi second to cdrom in bios boot order
3 never have any other hard drives connected in the box when installing raid either

Listener - consuming 100% CPU - problem

Hi Gurus!
I have a problem with my Listener in Oracle 10g. When I`m trying to start/stop I see
+[oracle@ZB ~]$ lsnrctl stop+
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 02-JAN-2010 16:18:47
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
but listner is not starting. Does anybody knows where can be a problem ? It cant start but listner proces consuming 100% CPU.
This is my listner.ora
+# listener.ora Network Configuration File: /opt/oracle/network/admin/listener.ora+
+# Generated by Oracle configuration tools.+
SID_LIST_LISTENER =
+(SID_LIST =+
+(SID_DESC =+
+(SID_NAME = PLSExtProc)+
+(ORACLE_HOME = /opt/oracle)+
+(PROGRAM = extproc)+
+)+
+)+
LISTENER =
+(DESCRIPTION_LIST =+
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))+
+(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.129)(PORT = 1521))+
+)+
+)+
and my tnsnames.ora
+# tnsnames.ora Network Configuration File: /opt/oracle/network/admin/tnsnames.ora+
+# Generated by Oracle configuration tools.+
ZKB =
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = TCP)(HOST = ZKB)(PORT = 1521))+
+(CONNECT_DATA =+
+(SERVER = DEDICATED)+
+(SERVICE_NAME = ZKB)+
+)+
+)+
EXTPROC_CONNECTION_DATA =
+(DESCRIPTION =+
+(ADDRESS_LIST =+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))+
+)+
+(CONNECT_DATA =+
+(SID = PLSExtProc)+
+(PRESENTATION = RO)+
+)+
+)+
Where can I find logs for Listner ? /oracle/network/logs/listener.log ?
help...

I have found a problem... Vmware...
This is my last Oracle on Virtual Machine...
Simply reboot of the virtual machine and working again... ehh...

Muvo V 100 2GB problem

Similar Messages

Maybe you are looking for