MuVo V200 - USB 2.0 (Why speed of transfer = USB 1.0)

For example the file 5,8MB is loaded from a computer into a player for 0 seconds...Message Edited by NeXT on 2-28-2005 0:59 PM

Can you be more specific? Are you having a problem with the player? Does your motherboard have USB2.0 ports? Is the transfer slow? If it is, make sure you have all the relevant updates for the system, that can include chipset or USB updates for the motherboard, and possibly a service pack for your Operating System.
Cat

Similar Messages

MuVo V200 Player suddenly dead and USB device er

My player MuVo V200 seriousely problem, suddenly dead after I was reload firmware and repair the storage driver, the USB could not read anymore in my computer, can you help me please !!!

Connect the player in Recovery Mode and reload the firmware again. Maybe try an earlier version - see the link in my signature line. PB

MuVo V200 usable as a usb-mass storage

Hi all
I think of buying a Muvo V200 MP3 player and I want to know if the Muvo V200 has a feature, allowing me to copy datafiles like presentations or movies on the usb storage of the Muvo V200 or not.
Do I have to use the Creative Tools to copy these files on the Muvo V200 or can I use a simple Drag&Drop Feature like normal usb mass storage have ?
Greetz Digger

okay thanks a lot

I want to downgrade my MUVO v200 to firmware 0.

Hi,
I have a Muvo v200, worked perfect in all computers until i upgrade to the last firmware, bad idea. I bought a Woxter with an USB port, and my MUvo v200 MP3 player not regconized, i thought maybe if i update my firmware it could be works. NO works in a voxter x-div.
I updated tho the last firware in the web, and works perfect in my enterprise,with a lot f computers, but when i arri'ved at home with my motherboard P4C800 Deluxe, the computer freeze, and gave me an error on hardware found.
I've read almost all the messages in the forum, recovery mode, USB mass storage, uninstall, reinstall drivers, i downgrade my Muvo with the complete list of older firmwares. I update the motherboard bios, the USB controller to USB2, the full speed in the bios.
And in some computers not works.
Before i upgraded, it works with all computers, and is that i want now.
Please i'm wonder if it's posible to extract the firmware of the recovery that is 0.0.0 and put in the firmware of my muvo v200 again. I'm sure that works again with all computers.
Believe me, when i say that i read almost all the faqs and messages, and i try a lot of possibilites during 3 days.
I'm waiting an answer thanks a lot in advance.

Hi rufustfirefly
Were you trying to install the following firmware?
Creative MuVo V200 Firmware 1.13.03
Dated Aug 21, 2015
File Name : MuVoV200_PCFW_LF_1_13_03.exe
If this is the correct file, do note there is already a warning in the description that explicitly states the following:
"...web release note. This firmware removes your player's FM recording feature."
In any case, let me confirm whether this can be rolled back.
Regards,
Colin-CL

A Problem With Muvo V200 !!

Hi everybody, I've bought a Muvo V200 GB, and it works well , less one thing:
When the blue light is activated I feel a very "high-pitched" sound, and it's very unpleasant.
Can somebody tell me if there is a firmware that fix that problem ?
I've tried to format the usb flash but I still have this problem. And I've also seen some posts in other forums that complain about that.

No, the problem is with the V200 hardware itself, not the headphones. But using a higher impedance phone results in this high frequency noise being greatly attenuated. Being a hardware issue, there is no possible firmware fix for this. The only option is to go to a higher impedance phone (the Koss KSC-75 sounds great and is available for $5 from amazon.com) or li've with the problem. You can of course set the player to have the backlight always off - this will also eliminate the problem except at startup but will make adjustments more difficult in the dark.

Mac Mini and MuVo V200 problem

I have Mac Mini .83 a few months now. Yesterday, I've, for the first time, tried to connect my MuVo V200 via USB. The problem is that Mac simply can't see MuVo at all!!! With other devices I have no problem. What I suppose to do?
Thanks anyone who can help?

Did you have the Mac before you bought the Muvo V 200? You should have read the box and listed requirements,if you bought this yourself. Below are the minumum requirements for the Muvo V 00 or 200.
Intel Pentium II 350MHz or AMD K6 -2 450MHz http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif Microsoft Windows 2000/XP http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 28 MB RAM http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 70MB free hard disk space http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif CD ROM Drive http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif USB .
luvmyrescuedogs

What are the speeds of the USB Stick?

I've bought a USB Memory Flashdrive, its the USB2.0 2GB..
Can anyone tell me why I can't use this USB Stick for ReadyBoost?
What are the speeds of the USB Stick?
Kind regards

and for people who haven't heard about Windows Vista ReadyBoost:
http://blogs.msdn.com/tomarcher/archive/2006/06/02/615199.aspx
Q: What perf do you need on your device?
A: 2.5MB/sec throughput for 4K random reads and 1.75MB/sec throughput for 512K random writes
My speeds according to the site in the post above:
Reading speed:
8 MB/s (max.)
Write speed:
4,8 MB/s (max.)
Speed USB port:
60x / 2.0
this is all according to this site, I was looking for official details on the Toshiba site but couldn't find any so here I am...

Zen MuVo V200 problem

My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
Sorry to be of a nuisance again, but is there anything that I can do?
Thanks again,
Vanessa.

plum_juice0 wrote:
My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
Sorry to be of a nuisance again, but is there anything that I can do?
Thanks again,
Vanessa.
As SSR has said, the PC Music Library error is a MediaSource problem.
The reason that you haven't managed to fill up your player is covered in SSR's FAQ post. Look for a section titled "I can't seem to fit any more files on my flash player yet I have free space, why?".
PB

My MuVo V200 doom

so here is the thing:
i bought my muvo v200 maybe few years ago and it has been working perfectly since it started to have problems connecting with my pc. it couldnt kinda connect with the pc. when i put it into my usb port the sound of "new device connected" played and right after it the sound of the device is unplugged and again connect/disconnect sound and it keeps doing that as long as the stick is put into the usb port.
so when it was doing that first time the problem disappeared eventually. but now the problem appeared again and it wouldnt disappear. so i read about the recovery device and tried to do the things mentioned in that post, even more problems appeared. before that event i was able to listen music with the player but couldnt connect it with my pc. now, when i tried to flash the new firmware on it there was an error which said something about timeout during the update and then the update was cancelled.
well there was that text blinking that do not disconnect the device during update, and then the error came so it kinda disconnected it during the update. now i cannot even put it on anymore, so i cannot listen to music anymore with my muvo .
i've tried to connect it with my second computer which just have been formatted and windwos has been reinstalled on it. same problem there with connecting and updating.
even my computer's bios displays that 4 usb devices are connected, and when i put muvo to the usb port it shows 5 devices connected, and after a few seconds it shows 4 and again 5 and so on...
is there anything i could do or is my player completely doomed?

If the firmware download was interrupted unfortunately the only way to fix the player is directly reprogramming the ROM, which is beyond what a user can do. You'll most likely have to pay for Creative to repair the player.

USB 2.0 high speed card won't run Canon MP800 printer

I have a Power Mac G4 AGP graphics. I installed OS X 10.4.4 on it. I purchased a new Canon PIXMA MP800 multi-function- printer. It needed a USB 2.0 high-speed connection. I purchased an Allegro USB 2.0 high-speed adapter card and installed it in my empty PCI slot. Here's my problem: When I connected the Canon printer, it would not print or scan.....it just went through the motion of sending, but not completing the task. I called Canon to trouble shoot the problem. I connected the Canon printer to my native USB 1.1 port and it worked fine. I then, removed my PCI card and reinstalled it, to be sure that it was seated correctly in. The Canon still would not work. So I plugged my old HP 1200C printer(USB 1.1) into the USB 2.0 port and my printer did work, but at the USB 1.1 speed. I contacted Sonnet Technology on the Allegro USB 2.0 PCI card and they said to try a utility called Cocktail or Tiger Cleaner to try and fix the problem. I downloaded Coctail and ran it to see if this would work. It didn't fix my problem. Any suggestions?

what type of USB 2.0 PCI card did you put in? have a look at the card and find out what chip is on it and let me know. I put one in mine that has the VIA VT6212L chip in it and it doesn't work either, despite OS X having native drivers for USB 2.0 cards.
The USB ports on my card didn't work at all until I installed a driver that I got from VIA. Even then though only 1.1 devices work while the 2.0 devices are not even recognised.
From what I hear, adaptec brand USB 2.0 PCI cards are what you want to get in future, plug them in and off they go (wish I'd done my homework). No messing around with drivers that support only half your new hardwares features.......of course its the other half that you actually need.
I've spent hours reading through all sorts of info and scanning forums everywhere to try to find a fix, I understand why you're a little woozie. A possible fix that people seem to keep suggesting is to zap your PRAM (restart holding command-option-P-R keys, don't release the keys until after the 3rd chime), didn't help me and I doubt it'll help you but at least when people tell you to try it you can say you've done it.
here's my post to my problem:
http://discussions.apple.com/thread.jspa?threadID=382760&tstart=0
Goodluck, please let me know if you find a fix.
JonBOY26

Suggestion firmware MuVo v200 Radio

I have a MuVo v200 GB vith 32 radios FM. Firmware .02.0e. It's a marvellous produced.
Suggestion: To be able to indicate the name of the stations FM memorized.
How: by creating a file fm.ini (simple textual file) containing following informations.
Example: If the user memorized the 5 following stations FM, he writes the file fm.ini according to and memorizes it in the root of key USB of the MuVo.
fm.ini file contains:
--- file beginning ---; no checking enters the frequency and the name of the station.;="Radio Creative the best"2="Radio France"3="Radio jazz"; 3="Radio culture"32="Radio Tour-Eiffel;; it's very simple for the user; Perhaps that it is feasible for the programmer--- end of the file ---
Thank you very much.

The latest firmware was a .0.xx version but it seems to have gone from the website - it will not do anything to improve your WAV recording.
What do you mean by voice and FM recording are BAD. That is down to how the player samples and encodes what it hears - changing the format to mp3 will not enhance your recordings. For example, the music on a CD is effecti'vely the same format as a WAV file and when you rip it to mp3 then the quality gets worse not better, due to the basic design of how encoding works - it removes some parts of the sound to allow it to be compressed into a smaller filesize..
It has never been said that you can't downgrade your firmware but peole do seem to have trouble getting it to work.
PB

HELP!!! MuVO V200 Fat32 NO RESPOND

I have big problem. I have MuVo V200 and i format it using FAT32. My Mp3 no responding. I can't format it to FAT/FAT6. My?system:?WINDOWS XP SP2. PLIZ HELP
!!! My mail: [url=mailto:[email protected]">[email protected][/url]

Try putting the V200 into Recovery Mode first. This is done by holding the play button and then connecting the V200 to your PC via the USB port.
When it is in Recovery Mode then try loading the V200 firmware.
To put it into Recovery Mode you might need these drivers:
http://uk.europe.creative.com/suppor...ame=Windows+XP
Download and install these to your PC first.
PBMessage Edited by PeeBee on 08-22-2005 05:36 PM

Help!! Dead MuVo V200

I recently brought MuVo V200 G
And I have on the screen this message "file sis eror" then it shut down
I try to connect on usb but my computer did not detect this hardware
so i could not format or do anything
Then I try on laptop and...nothing same result (
Pls i'm desperate HElp me I have this device for only a day and
now is not working ....
Any sugestion is good PLESE

go back to the shop and get a new one, I think I read somwehere that you can get a new unit free of charge within a certain amount of time from day of purchase, might be mistaken though.

MUVO V200 FILE SYSTEM ER

I know i don't have a recent product but maybe someone can help me.. I have mp3 muvo v200 and when I try to turn it on it only appears "file system error" and then it turns off. I can't switch it on anymore.. I inserted the usb port in my pc and noticed that all the songs where in the memory anywhere. I tried to format?the disk but nothing happened...does anyone have any suggest? how can I make it work again?please help me! thank you for your attention!

You need to get the firmware from Support->Downloads and then run it to reload it onto your player. During the reload click the Format Data Area option and all will be well again. PB

Muvo V200, it's broken

Hi all,
I have a Muvo V200 buyed in December 2005. One day it was doing its work...the day after, when i plugged it in my laptop USB port it started to go crazy!
The OS find my muvo V2oo but after second a message say it has been removed. Then a new message says the muvo is plugged in, and a second after the same message says the muvo v200 is removed....so long.
What can i do?
Please, please, help me

latinus,
Have you try updating the firmware? If not, give it a try first. If all else fail, you need to get in touch with Customer Support.
Jason

MuVo V200 - USB 2.0 (Why speed of transfer = USB 1.0)

Similar Messages

Maybe you are looking for