MWST - VAT for Canary Island

Hi all,
I need to determine VAT 0% for a region in Spain. The standard sequence (MWST) check only the country, so for country ES determines always 16%. I have created a new table with the region field (REGIO) assigned it to the sequence, but the system do not see the field REGIO while pricing determination. Condition record for MWST regio 35 is mainteined in the system.
We have tried to add the field REGIO in debugging but some where in the program this data is deleted. We have checked different user exits in Include MV45AFZZ. We have add field REGIO in an append of VBAK without results.
Does any one have met this problem before?.
Thanks in advance. Mikel

Hi,
Look when you created table, that time u selected region,but which region,
In field catlog I sure there are 2/3 field named as REGION. and this two regions are, one is for PLANT REGION & other is for CUSTOMER REGION.
I also faced this problen in my previous implementation
SELECT PROPER REGION.
Kapil
Edited by: Kapildev Farakte on Jan 14, 2010 5:26 PM

Similar Messages

Model 415 for Canary Islands Tax Auth.

Hi all,
¿Anyone knows how to get the flat file of declaration form 415 for Canary Islands Tax Authorities?
This form is very similar to 'DAO 347', but whit different file format.
Thanks a lot.

Hi Manny,
               Thnx for the input. However I checked table T5UTX to see the ceiling there. The ceiling is 9000.00. However amt in RT Table for /715 wage type is much below the ceiling value i.e 1,210.51.
Amt in /615 = 1,213.47 . This diff of $ 2.96 is due to the presence of Gross-up wagetype 12SC. I have checked the Tax Model settings for DC thoroughly to see that this wagetype 12SC gets included in the taxable for Er Job Devmt Assessmt tax. And /615 is being calculated as expected in the RT Table. The problem lies with /715 !!
I am a bit confused by the presence of 2 entries for Tax Type 15 in the payroll log in Func USTAX:
Tax authority DC District Of Columbia DA01
Tax Category                                                  Tax.inc    Tax-free Inc.Declare Tax.earning         Tax
01 Withholding Tax                          (REG)     1213.47        0.00     1213.47     1213.47            57.00
10 Employer Unemployment Tax      (REG)     1213.47        0.00     1213.47     1213.47           15.78
15 Er Job Devmt Assessmt Tx      (REG)        2.96            0.00        2.96        2.96                    0.01
15 Er Job Devmt Assessmt Tx      (REG)     1210.51        0.00     1210.51     1210.51             2.42
41 Employee Disability Tax             (REG)        2.96             0.00        2.96        0.00                  0.00
Why are there 2 entries separately for Tax Type 15 ? The answer might be the solution to this issue.
Please help.
Thanks And Regards,
Somdeb Banerjee.

VAT charges Canary Islands should be 7 %

When I check prices on different subscriptions bought in Spain only one option exists regarding VAT payment: 21 %. But I you live in the one of the Canary Islands the VAT is only 7%. Whay should I have to pay the extra 14 % VAT. To put it in another way, why should Skype profit more from people living in the Canary Islands than in other countries?

For this you need to change the Tax procedure say TAXINJ by using T code OBQ3.
In this, please change the step of Freight Condition type such that it will come before VAT condition type.
Then you can create a new tax code & assign values using T code FTXP.
Regards
Bhavesh Mistry

RE: SNP INTRODUCTION CANARY ISLANDS: Country ES: Spain or IC: Canary Isles

G'day Team,
Client is currently using ECC6 and integrating SCM7.0. The existing Canary Island plant config for plant has country assigned as ES: Spain; Region defined Tenerife. When I CIF transfer location fails transfer as "Country Key IC is not defined".
Form your Iberia experience when you interface a plant in Tenerife for example; what was the ECC plant config? ES: Spain Or IC: Canary islands?
When I removed region reference to Tenerife CIF error "Country Key IC is not defined" exhibited again. When country "IC": Canary Isles assigned to plant config the plant location CIF No problems. Can you please confirm best practice in your Iberia experience?
Many thanks,
Andy Goz
SAP APO SCM CIF Consultant

G'day Team,
Not wanting to change APO config, the Country specific check can be taken off for Postal code & location CIF's ok with country ES.
Thanks for inputs,
Andy Goz

Call charges to the Canary Islands

Hello,
I just wanted to know why does BT differenciate between calls to the Canary Islands and calls to the rest of Spain?
They have the same numbering system, are as much part of Spain as Madrid or Barcelona, calls to/from the islands cost the same as calling any other region in Spain. Plus there's no way at all to differentiate a mobile phone from Spain or from the Canary Islands since the area codes are the same.
This really puzzles me since this is the very first time in my life I've seen this (excluding the Canary Islands from the rest of spain) in terms of calling charges.
It's like having a Spanish telco charge more to calls to Northern Ireland than to calls within England, Wales or Scotland.
thanks!

Hi Guys
Calls to the Canary Islands are treated separately in wholesale terms, ie, the space that we buy on networks to send calls, and historically they have had a higher delivery cost than those for calls to mainland Spain. That’s why there is a difference in the prices offered by us and other operators for calls to these destinations. We are constantly reviewing our prices and may look at this area in future but there are no plans to make any changes at this time.
Friends & Family International offers much lower prices to the Canary Islands compared to our Calling Plan rates, find out more here.
http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=25500
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Incoming payment VAT for exchange difference

I need to post the Incoming Payment (F-28 or F-36), with VAT tax about the exchange difference.
When simulate the post, appears the automatic position with the exchange difference but do not appears the VAT for this difference. Anybody know where customizing?

Please check this link
Exchange Rate configuration
thanks
SKKS

VAT for Spain

Hello all,
could you, please, help me with this?
Since 1st of january spanish VAT numbers validations rules seems to have changed.
Up to now we have noticed that letters have been added in 3rd and last position:
For example: ESW0601104C
ESY0041572W
The setup in SPRO for Spanish vendors only indicate the lenght of the VAT for Spain but not its composition and it seems that this is SAP dependant configuration.
Can you please have a look where this configuration is and if there is an OSS note related to this subject?
Thanks a lot and I wish you a nice day
regards
Hana

Hello ,
thanks for this note, it helped me a lot
but still have a question.
At the moment we have got in our system the following letters to be used as a first digit:
A, B, C, D ,E ,F ,G ,H ,P , Q, S so witg the note you sent to me (thanks once more) we would get letters like U, R, V, J, W
but the VAT that we need to use in SAP for vendor is ESY0041572W , which means Y as a fisrt digit
Plus we were asked for more letter L M K X Y N
can you, please, let me know if those letters are available aslo somewher?
Thanks a lot for letting me know
regards
Hana

VAT for purchased materials

Dear All,
We have purchased 10 Diff materials with with 4% VAT Cr & At the end of month my client will decide to avail the 80% VAT for only 4 materials and 20% wants to add into the material cost. It will be decided on the base of consumption of materials
For remaining 6 materials wants to avail credit of 100%. How to achieve this ?
Any idea
regds,
CB

Hello ,
As i understand , based on the consumption , the nature of the material is defined & hence subsequently it is decide whether the VAT on the material is deductible or Non deductible .
Unfortunately , your client will have to define at the time of procurement itself , if the VAT shud be deductible of non deductible .
This is so because , a tax/duty once levied will not change . A change wud ask for reversal of the entire procurement cycle.
Regards
Anis

VAT for Ireland

Hi experts!!
I would like to know if someone could help me.... I have to customize VAT for ireland.
I tried to put the group number for tax base amount but the number of characters is only 2 (numerical) in SAP and i have some group number in the irish VAT trading details with 3 characters and alphanumerical.
Do you have an idea on how to configure VAT for Ireland?
Thanks in advance,
Chris

question cancelled

VAT for capital goods

Hi Friends,
I have created a tax code with VAT for Captal goods JVCD. But in PO itself it's values is not getting. I have to activate this condition type ,I think. Can any body please convey, How to activate this condition type JVCD?
Regards

U r using TAXINN(i think)
go to FV11 and maintain the condition record of JCVD.based on the access sequences ur having.
that is the only way to get values in PO.
regards,
sujit

VAT for 2011

Hi
We have a raise in VAT for 2011. I have added the new VAT % with valid from date 1.1.2011 to SAP.
If I now open a new sales order with delivery date for 2011, it should use the new, higher VAT, but it doesn't.
What do I have to do to be able to issue Sales Order confirmation with the new VAT for deliveries that will take place next year?
Thanks
Franz

I have a "SAP How To Guide" created by Michael Langenbach in which it says:
Das Anlegen dieser temporären Kennzeichen erfolgt entweder manuell oder per von SAP zur Verfügung
gestelltem Update-Query via Remote Support Platform.
-> ... manually or via Update-Query provided by SAP ...
I did check RSP, nothing there.

Looking for Carribean Islands map

Hi, where can I get the map for Caribbean islands? It is not in the map list provided by Xcelsius 2008.
Thanks in advance for your help and advice.

Hi GT,
You can create an flash object with Caribbean maps and use it into Xcelsius.
The other alternative would be using the sdk's like Yahoo maps or you can also make use of Google maps to get the maps of countries which you don't find it in the default of Xcelsius.
Alternately you can also make use of Image component to show a Caribbean maps, but it all depends on your requirements.
Thanks,
Amit.

Issue Pertain to VAT for EU region

Hi Team,
I have an issue pertain to VAT for the EU region custoemr..
My client requirements is for EU region VAT # should appear numbers for their procurement of spares and services in EU region.
and no VAT should be computed.
When i post the entry from FI Side in FB70 tax is not getting calculated, which is fine, where as when check with SD person to create SO and invoice i could find that tax is getting calculated.
It would be great if you could help to understand the issue and give an idea to resolve this..
Thanks and regards,
Pasha

SAP stores the 3 decimal value in XKOMV-kbetr and Xkomv-kwert is calculated based on this 3 decimal values...
I had a similar scenario with currency conversion and rounding issue in sales Order and Invoice processing, in VOFM routines... so I used a Floating point value and converted to character value and then used that 3 decimal value for calculation.

VAT for Europe Question

SAP seems to identify EUROPEAN countries for VAT Tax purposes. Anybody knows how it does it, is there a table with a list of EUROPEAN countries that I can add?
My problem is that I have a B/P in Ireland but SAP does not recognise it as a European Country so the relevant tax Code does not come up and I am not sure how to rectify this?
Thanks
Robert

Hi,
Go to Administration -> Setup -> Business Partners -> Countries and tick the EU tickbox for Ireland.
Regards,
Nat

How to reverse the VAT for which I have already taken the credit ?

Hi Experts,
In case of outside state sale, I can't take VAT credit on my purchases. In year end I have to reverse the excess VAT amount for which I have already taken the credit. Please tell me how to reverse the credit taken for VAT step by step. Its very urgent.
Warm Regards,
Reva
TCS

HI,
with help of FI consultant you have to pass JV
Regards
Kailas Ugale
Edited by: kailasugale on Feb 17, 2012 3:24 PM

MWST - VAT for Canary Island

Similar Messages

Maybe you are looking for