My Airport Express will not stream music to my remote speakers through the laptop (windows Vista), gives error code -15000. Works fine from my IPAD and Ipod. Any thoughts, suggestions?
Itunes is throwing a -15000 error code on my Windows vista. Ipad and Ipod work great for streaming to remote speakers, trying to use the computer and it throws the error code.
Any thoughts? I've rebooted the laptop, modem, and AE, even plugged in the laptop recommended by other users, still nothing.
the following is for W7 but might work for you:
Fix for error -15000 Remote speakers on iTunes / Windows 7
Similar Messages
-
Need Help...my wireless airport express will not work with my update of snow leopard
after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.
If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.
-
AirPort Express will not extend Wireless Network
Hello. My airport express will not extend my wireless network. It was green for about the first 4 hours and then I've had a flashing yellow light since that time. I've reset it a bunch of times and even have the AE in the same room as my AP Extreme. I complete the setup and then it continues to flash yellow. Can ayone give me a hand?
In the cases where the AirPort base stations would be interconnected by Ethernet you want to configure then for a roaming network, NOT an extended network. Apple uses the term "extended" when the base stations use wireless connection. Regardless of naming convention the end results is pretty much the same.
The link I provided should provide you with the necessary steps to set this type of network up.
If you need additional help, please start a new post as the solution for you will be different than the OPs. Thx! -
Iphone 4 will not stream music in 3g
My Iphone 4 will not stream music on 3g. It will connect to pandora, Iheart, or some local radio stations play for a min, stop, then buffer or just quit playing. This is a problem that started about a week ago. Prior to this week, worked fine all day long. WIFI is not available in this location, so that is not an option.
A couple of last things come to mind as I think this through. I know the screen shots I'm going to provide are in Windows, but it should be quite similar. On the Summary screen under options, there is a box for sync only checked music, not sure if you have that checked.
And then on the Music tab, how you have music checked.
I cannot think of anything else after that. -
My iPod shuffle will not turn on, nor is it recognized by the computer to pull up iTunes. I have order new USB cords and nothing. Please help! Not sure of the generation of iPod shuffle, I think 3rd.
first: why did you download the iOS Beta 8? If you are a developer, go to the Apple Developers website and check what they can do for your case.
second: setup an appointment to a Genius Bar for service. -
My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Code source works fine from console application but not from SharePoint interface
Hi;
Please can you help
me to understand why my code below works fine from console application (VS 2010) and not working from interface of my SharePoint collection site :
From console application : the subsite is created and I can to open without any problem
From Sharepoint GUI : the subsite is created but impossible
to open subsite : error 404 page not found ?
The subsite creation is very long (2 minutes) and in concole application When I try to open the subsite just after its creation I have page not found and I must waits (several refresh) more time to open the subsite correctly.
Can be I must to display a PoPup to show the progress creation ?
using System;
using System.Security.Permissions;
using Microsoft.SharePoint;
using Microsoft.SharePoint.Security;
using Microsoft.SharePoint.Utilities;
using Microsoft.SharePoint.Workflow;
namespace CreateSubSiteClients.EventReceiver1
public class EventReceiver1 : SPItemEventReceiver
public override void ItemAdded(SPItemEventProperties properties)
base.ItemAdded(properties);
try
SPWeb web = properties.OpenWeb();
if (properties.List.Title == "REFCLIENTS")
SPListItem curItem = properties.ListItem;
string name = properties.ListItem["SITE"].ToString();
curItem["SiteUrl"] = web.Url + "/" + name;
SPWeb rootWeb = web.Site.RootWeb;
SPWebTemplateCollection webTemplates = rootWeb.GetAvailableWebTemplates(1036);
SPWebTemplate webTemplate = null;
String webTemplateName = "ModeleSiteCourrier";
String webTemplateSearchName = "";
for (int i = 0; i < webTemplates.Count; i++)
webTemplateSearchName = webTemplates[i].Name.ToString();
if (webTemplateSearchName.Contains(webTemplateName))
webTemplate = webTemplates[webTemplateSearchName];
break;
SPWeb newSite = web.Webs.Add(name, name, name, Convert.ToUInt16(1036), webTemplate, false, false);
newSite.Navigation.UseShared = true;
newSite.Update();
newSite.Close();
Console.WriteLine("Le site suivant a été crée", name);
catch (Exception ex)
properties.Status = SPEventReceiverStatus.CancelWithError;
properties.ErrorMessage = ex.Message.ToString();
properties.Cancel = true;
RegardsHi,
To create subsite using event receiver in SharePoint Empty Project, you can refer to:
Sharepoint 2010 event handler to create subsites
To display a PoPup to show the progress creation, you can use: MessageBox.Show("Hello, world.");
More information:
MessageBox.Show Method (String)
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?
Rodilator,
We'll figure this out together! Can you please walk us through the exact steps you're taking to answer a call when it comes in?
SarahO_VZW
Follow us on Twitter @VZWSupport -
Airport Express will not talk to my router
I have 2 airport express stations that are 6.3 and they have always been able to connect to my qwest wireless router no prob. I've recently updated to Leopard and was surprised to see the new airport utility instead of the airport admin and airport setup tools. I like the new utility and interface as it seems less confusing than the old but now I'm having issues.
1. I can get the new utility to recognize my airport express ONLY when I do a hard reset to the airport express.
2. As I've done many times in the past, I go through the following setup protocol to join my current wireless network. I simply want to join my current network so I can talk to my stereo and printer wirelessly.
3. When I finish the setup and hit update, the airport utility updates the express successfully and then attempts to restart the express in order to join my network. This is where the problem lies.
*Here's the error message I get:*
AirPort Utility was unable to find your Apple wireless device after restarting.
The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again.
Now, I've tried repeating this process 10 times with both airport express stations and the same result happens? Remember, the only way for the utility to find the express is to hard reset the express. What gives? I bought both of these express stations over a year ago and they've been working fine til now. Because they are older and updated to 6.3, I shouldn't update them to the 802.11n7.3.1 update or should I? Is there something different about this new airport utility in Leopard that is causing the problem?
Like I said, I've done this exact same thing many times and its pretty straight forward but I'm stumped.
Anyone? Thanks in advanceI've got the solution! It took me some fair hours, though...
It seems the Airport Express can not handle the WEP-encryption properly, nor the 64 or the 128 bit versions. Here's how to work around it:
1) change your routers encryption to WPA2 with passkey (WPA-2-PSK). You may use the 10-digit code supplied with most routers or any of your own choice.
2) Change all wireless cards in your network to WPA2-PSK. It can take some time to figure it all out, but in the end you'll fix it. I had to download a new driver for my D-Link card DWL-G650 for instance.
3) Do the usual config thing with the Airport Express. Choose to connect to an existing network, apply the 10-digit passkey (be sure to choose the WPA2-PSK-option in the drop down-menu).
4) Off you go! Itunes will find the remote speakers, green lights all over and everybody turns happy...
/W -
Airport Express Will Not Reset or Join WDS Network
I have an Airport Extreme which is a WDS main. The Express will not join the network. I reset the Extreme, set up the network again, and did a hard reset of the Express. Airport Utility will not see the Express either from my iMac or MB Pro regardless of whether I connect directly through Ethernet, or wirelessly. The Express flashes amber. I've read the proposed solutions given to others with the same problems, but nothing works for me.
I know I'm doing something incorrectly, but can't figure out what's going on. Any help would be greatly appreciated.
ThanksA couple of suggestions:
1. do a factory default reset of the Airport Express. Follow the instructions to the letter, which means don't let go of the reset button until you see the four green flashes in a row. This can take a bit longer than Apple's article suggests - up to 10-15 seconds.
2. when setting up the WDS (and I suggest you do this all wirelessly) make sure the Mac, the Airport Extreme, and the Airport Express are all in the same room. I suggest you use the iMac - MacBook Pros seem to have their own share of wireless network problems. -
After Leopard install, all three Airport Expresses will not work...
I have three Airport Express' that worked completely fine before I installed Leopard. After the installation, the Airport Utility will not even detect them. No matter how many times I try to reset them, unplug them, or yell at them, they will not be recognized by the Airport Utility. Currently, all three units are completely useless and just flashing amber. I have tried to look through the topics to see if anyone else has the same issue but, I could not find one that seem to be a duplicate of this problem.
Please help.
-F.My guess - are you trying to connect to them wirelessly?
If so, the only solution I found was to hook them up with an ethernet cable to the Mac.
Airport then finds them OK and you can upgrade the firmware / software to latest versions.
Hope that helps
Andy -
Airport Express will not hold a static IP address
I have a LAN subnet which uses static IP addressing in which I have an Airport Extreme and four Airport Expresses, one of which is hard wired to the Extreme, the others wireless. All are running in bridge mode and should have fixed IP addresses in the LAN range. I can configure these for the Extreme and the wired Express, but when I try configure the wireless Expresses for static IP they quickly revert to DHCP, and unsurprisingly do not connect to the internet, though otherwise work fine (i.e. AirPlay isOK). (The LAN subnet uses private 192.168.x.x addresses and NATs to the internet; it uses fixed IPs to avoid the 'double NAT' problem. I get good internet connections from wired devices and wireless devices connected to the Extreme and wired Express).
The wired Express is the latest model: the wireless Expresses are the previous (plug-in) model. All are running Airport 7.6.3.
I am unclear whether reluctance to hold a fixed IP address is because (a) they are connecting wirelessly or (b) they are older models.
Does anyone have any ideas about this?I have the same problem and please someone HELP!
I read almost all entries regarding to how to enter a static IP address. I completly understand how to enter the information but I feel like an idiot because I cannot figure out how to save this information.
I experienced the exact same symptom what many others with intermittent wi-fi connection and using a static IP seemed to solve it completely. BUT the lovely iPad just doesn't want to remember the configuration, as Dwoody1 described it above. There are other posts related to the same issue but I could not find an answer.
Could someone please tell us if people struggling with the same problem are missing something or there is no way to make the iPad to remember static IP settings!
THANK YOU -
Hi there, I have noticed that the color/ brightness of my iMac is very different to that of other iMac's. My machine will also not let me create a calibrated color version through the system preferences either, an error ocurrs. Any pointers on how this issue could be fixed? THanks.
Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck! -
When I connect my iPhone to the Mac iTunes it tells me my phone is already synced to another iTunes , I don't know how to add the music on my iPhone to the Mac iTunes .. My laptop windows vista iTunes will be deleted once I know how to transfer the music over the the Mac ,,, hope someone out there can help
use the instructions in this article here to transfer your library to the Mac.
your iDevices will simply continue syncing (now with the Mac's iTunes library) as if nothing happened. -
My reading list is not Syncing on my Mac. It works fine on my iPad and iPhone.
My reading list is not being updated on my MacBook Pro. It is working just fine on my iPad and my iPhone. I have follow the trouble shooting not he Apple support webpage. Have restarted my computer several times, and it continues not working.
Tengo el mismo problema desde antier, ya desactivé la opción "Mail" desde las opciones de iCloud y volví a activarlo y no se resolvió. También eliminé la cuenta y la volví a agregar y el problema persiste. Les adjunto la pantalla de error. Mi cuenta también pertenece al dominio @me.com. Alguien sabe a que se debe?
Maybe you are looking for
-
I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I d
-
<p>Hello,</p><p> Is it possible to split a column into several (at least 2 sub-columns; analogy with rows)? The work-around to use rows and subrows for the data does solve the problem.</p><p>Any suggestions?</p>
-
Connecting a desktop computer to the Internet via the Mobile Hotspot?
Hello, I've looked at the other postings about this but I'm still not having any luck....and I'm not really sure who to call for tech support. I can connect my laptop to the Hotspot just fine. The desktop computer is another story. I bought a Mediali
-
Acrobat 8 hangs after starting
I've tried to find this on the forum, but I might have used the wrong keywords. If so, sorry. I have the Design Premium CS3 Suite installed on my MacBook Pro (10.4.11). Every time I load Acrobat, it hangs and gives me the "beach ball" for a minute or
-
Dreamweaver & BC product option design help
Hi everyone, hope we are all well? I have been building non e-commerce websites for a long time, i would say im above average at the job but i need some help as i take on my first e-commerce. Im using Business Catalyst and Dreamweaver CC and the site