My apple i mac wont start as normal it makes three beeping sounds
my apple I mac 2009 won't start up normally it makes three loud beeps
Remove and reinsert the computer's RAM. If that doesn't work, use different modules.
If that only happens when you try to boot the computer to a specific Mac OS X version, it's too old.
(114514)
Similar Messages
-
My Mac wont start up. I turn it on and hear the sound,sea grey screen withy he apple and then it turns off after a few seconds.
See this link for some tips.
http://support.apple.com/kb/TS2570">Mac OS X: Gray screen appears during startup -
"My ipod is displaying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesn't "see" it even if the computer does."
It worked two days ago fine, for two years, until I installed this newest iTunes update, then for one day it kept on freezing and going to apple logo screen mode, then today it only goes to that screen and wont start up at all.
I've tried the hold down two buttons hard reset, that doesn't help. I've tried disc mode... but iTunes doesn't "see" it even if the computer does.
This is a pristine ipod, never exposed to adverse conditions, never dropped, never wet, and it worked perfectly two days ago.
Can I factory reset it somehow? (considering itunes can't "see" it)
[Ipod classic 160gb less than two years old.]Looks like I might have found the solution on a youtube comment:
R.O:
"Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure. -
Iphone stuck with apple symbol and wont start up
i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do
Hi,
Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
**** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
THANKS -
My Mac wont start! what can i do?
My Mac wont start! After i restarted it for a update it just crash when i try to start it what can i do?
What and why aren't people doing something simple that has worked for the last 10 yrs:
Clone your system before you ever apply updates
Always have a working bootable backup (or two)
Keep the prior version on the shelf
Keep the combo updates around also.
It is not hard or rocket science.
There is no mechanism to undo rollback or restore check points. No utility to sandbox updates and revert as they sometimes go wrong. Things that are overdue.
MicroMat made having an "eDrive" partition s sinch to do and was its own recovery/emergency boot partition.
Carbon Copy Cloner has been around since 10.2.2, and later SuperDuper and others, Clone X etc.
A clean install is simple. Keeping your emergency boot drive for maintenance updated but with just Apple OS and essential drivers.
Use Safe Boot beforehand. People used AppleJack before updates or at first freeze or sign of trouble.
If you have more than enough room for TimeMachine, then a couple options:
Set aside 35GB is more than enough for emergency boot maintenance (Lion Recovery is nice but doesn't have everything your toolbox might want or need)...
Set up a partition large enough for your working system, again 40-80GB should be enough, you won't clone everything as you can leave your home account folders for TimeMachine if you want (but do want to copy your home Llibrary ~/Library). perfect job for Carbon Copy Cloner.
Setting up an external boot drive is 101 along with TimeMachine.
Not a good idea to have all your eggs in one basket two or more backup drives is better but...
TimeMachine - 350% your total files and changes needed to have file history archived,
Emergency OS
Clone OS
I prefer a 1.5TB minimum.would do fine for most. -
MY mac wont start past the gray screen. I tried starting on safe boot, single user user mode , recovery mode. Everything it gets stuck on the gray screen i even tried reinstalling it , same thing what should i do? it lets me reinstall sometimes Sometimes.... it is weird.
orshikhfromsc,
boot from the Mac OS X Install DVD that originally came in the box with your MacBook Pro (by holding down the C key as it starts up). When the desktop appears, select Disk Utility from the Utilities menu and erase your internal disk. After it’s been erased, reformat it. After it’s been reformatted, exit Disk Utility and reïnstall the version of Mac OS X from that DVD onto your internal disk. After that version of Mac OS X has been reïnstalled, boot from your internal disk and run Software Update to get it up-to-date within that version; that should allow you to redownload and reïnstall Mavericks, if desired. If Mavericks is reïnstalled, run Software Update again to get it up to date.
If you no longer have the two grey installation DVDs, you can purchase a replacement set from either Apple or iFixit. -
itunes wont install, runtime error R6034 also 'apple mobile device' wont start! help!
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Error 3194 still presist while restoring ipod touch 4g, just shows apple logo and wont start
Method 1: i have tried almost everything, 'hosts' file editing (adding and deleting that ip gs.apple.com thing)
Method 2: redsnow, snowbreeze,ireb (custom ispw and fetching thing)...
now my ipod is in dead case, it just gives apple logo and wont start.
Method 3: TS 3.0 and 1.0 checked, certificate xyz... uncheked from intertnet explorer-> internet option -> advanced -> security
Method 4: netsh xyz (comand) in cmd...
Please Help thank you.
"Details:
ipod touch 4g
ios 6.1 installed (lastly)
jail broken but deleted cydia from it
then tried to restore it always gave Error 3194,
then restored it from its backup file after that it didnt opened or just showed apple logo thats it."
my itunes on dignostic gives this report,
Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP xw4400 Workstation
iTunes 11.1.1.11
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 001AB71808E6CBD8
Current user is not an administrator.
The current local date and time is 2013-11-29 04:19:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 8400
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.1.11 is currently running.
iTunesHelper 11.1.1.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {BC8F9388-D244-4F12-92A3-A26318EE6C52}
Description: Broadcom NetXtreme Gigabit Ethernet
IP Address: 192.168.1.102
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Fri Nov 29 04:16:55 2013
Lease Expires: Fri Nov 29 06:16:55 2013
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-11-29 04:18:45.lllaass thank u bro, but none worked for me
i have tried all these methods n above which i mentioned before....
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
in the end i went ot market n paid him 1.94$ and he restored it to 6.1.5... and said apple has closed other ios updation except 6.1.5 ...but still thank u soo much learned some new stuff from u... -
TS1363 my Apple mobile device wont start? why
Mu Iphone will not connect to my itunes for some reason the message keeps saying my apple mobile device wont start? ive reinstalled itunes but it still wont work
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Battery full - Mac wont start. Heeeelp!
I just purchased my MacBook a month ago and I love it. Now Im having a problem...
I just had this problem today. The battery is full but my Mac wont start. But when I connect it to the power adaptor - it will start. Should I change something on the Energy saver option?
I've tried to remove the battery and placed it back, but the problem is still the same. I need your help please... thanks in advance.Yup, looks like you've joined the Macbook Shutdown/won't boot club. Mine did the same after the random shutdown problem. I reset the PMU and NVRAM and PRAM and suddenly it wouldn't boot or operate on battery. Let me guess, it works fine on the adapter, but when you pull the plug it immediately shuts down, right? Even though the battery is fully charged? I'm also from DK. Did you buy yours at Humac? Mine is being repaired as we speak, well actually it's waiting for parts (new logic board and battery) but it's taking forever. Turned it in on july 25th and it is still waiting for parts. My advice is to demand a new one, don't hand it in for repair, because I seriously don't think they know what is wrong yet. What week is your Mac(Check the serial-number and post it)?
I've heard that a lot of people got the LB replaced, but soon after the problems started again. -
My i mac is having trouble at Start up and often makes a clicking sound followed eventually by a folder icon on the screen that shows a file with a question mark inside, Is this a sign that my hard drive is failing?
As for the folder with a '?', here is some info that might help:
https://discussions.apple.com/thread/5201710
http://support.apple.com/kb/TS2570
Hopefully you are making regular full backups just in case the hard drive is failing? -
My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. What should i do?
If you recently installed new ram, make sure it is seated properly.
If that doesn't work try removing one stick at a time to see if one is dead or put original ram back in. -
My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?
If your MBP is under warranty, bring it to an Apple store and have the technicians fix it. If not, try the steps in this support article:
http://support.apple.com/kb/ts2570
Ciao. -
My mac wont start up. please help
hi, i wanted to reinstall osx panter as my computer was running really slow. I put the disc in ad my mac restarted. It now wont start upat all. i've tried holding down shfit and c abd still nothing happns.I can not get the disc out as i have a mac mini and the eject button on the key board isnt working. Do you know what ii can do? When I press the power butten the apple logo comes up as normal but then nothing happens
To eject the CD, depress the mouse button at startup.
To boot from a CD, you depress/hold the "c" key at startup.
Look at these links.
The X Lab (Troubleshooting & Maintenance of OS X)
http://www.thexlab.com/faqs/faqs.html
Apple's Mac OS X Troubleshooting 101
http://www.apple.com/support/mac101/help/
OS X Routine Maintenance & Generic Troubleshooting
http://www.macattorney.com/ts.html
Prevent Mac Disasters
http://www.macworld.com/2005/01/features/preventmacdisasters/index.php
Cheers, Tom -
My power mac G5 wont start up. When i turn it on it comes up with a message saying you need to restart you computer and a load of script drops down in the top left hand corner. I cant get past it and tried everything. This happens everytime i turn it on.
HELP!!!!!Hi-
Welcome to Discussions!
Have you-
1- Removed/disconnected all devices, except for keyboard, mouse and monitor?
2- Checked your panic log? You can check the kernel panic log any time that you must force restart your computer, using either the power button, interrupt button, or the Control-Command-power key combination. The kernel panic text is added to the log the next time you restart the computer, assuming that you have not reset PRAM at the same time (the kernel panic text is stored in PRAM until you restart). The file is named "panic.log", and it is located on your startup disk at: /Library/Logs/.
The panic report is also the "script" that is displayed when the "restart your computer" message appears. A copy of the report would help.
3- Tried a "safe boot"? Hold down the "shift" key when starting.
http://docs.info.apple.com/article.html?artnum=107393
4- After checking the panic log, try resetting the PRAM:
http://docs.info.apple.com/article.html?artnum=2238
What is a Kernel panic?
http://docs.info.apple.com/article.html?artnum=106227
Resolving Kernel panics:
http://www.thexlab.com/faqs/kernelpanics.html
Isolate kernel panics:
http://macosg.com/group/viewtopic.php?t=800
If you can get to the panic log, possibly during a safe boot, record the log, especially everything after "backtrace":
http://docs.info.apple.com/article.html?artnum=106228
Maybe you are looking for
-
Why does my device not work as well anymore
It's been quite some time since this device worked properly and consistently. The GSM module is affixed to a window pane with all blue LEDs. Occasionally, one or more may turn red and I'll have to reboot the device. But even when it's up, my signa
-
HELP - DEAD iPOD !!! - APPLE PLEASE RESPOND
After updating my 30 gig 5G with 28th June update it has become paralyzed - blank white screen and emits 3 beeps when I try to do anything. I have seen similar threads here. Apple please respond - what should we do? thank you Pete London UK
-
We have DW8 running and reloaded a new system to see the differences..the triail will not activate. This is on a Windows XP Service Pack2 New Dell Optiplex 745. There is nothing else on this system?? Any help would be appreciated. Leo
-
Accidentally erased songs and ITunes ignoring iPod
Not knowing very much on how to work computers and such i made a very big mistake. A couple of years ago i got my iPod, i installed iTunes into my computer (windows), works out perfect no problems, songs are still in the library at this very moment.
-
Cannot find a place to define the UOM of our CMIR entries
Gentlemen We currently have a requirement to create customer material number info records for certain consignment customers. However, while doing so, we cannot find a place where we can define the Unit of Measure of our CMIR entries. We can specify