My Apple Macbook Pro running OS X Yosemite freezes 10.10.1 regularly. When it freezes the only remedy is to physical shut the screen. I don't use any external devices.

My Apple Macbook Pro running OS X Yosemite freezes 10.10.1 regularly. When it freezes the only remedy is to physical shut the screen and wait for the battery to run down. I do not run any external devices, and when it freezes you cannot do anything with the computer. It is new, and this problem is very frustrating. Any suggestions?
Thanks

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Similar Messages

  • I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.

  • New Retina Macbook Pro running mavericks gets stuck at one minute during setup when coping files via USB

    Running setup on a late 2013 Retina Macbook Pro for the first time process gets stuck saying "Less then a minute remaining". Transfer is via USB from a clone of my drive on an external drive that is bootable from my 2007 Macbook Pro running 10.68. Have run disk utility on drive and fixed premissions in advance of running set up. Have had the same happen when I activate the new Retina Macbook Pro without running setup and then running Migration ***'nt later.

    Running setup on a late 2013 Retina Macbook Pro for the first time process gets stuck saying "Less then a minute remaining". Transfer is via USB from a clone of my drive on an external drive that is bootable from my 2007 Macbook Pro running 10.68. Have run disk utility on drive and fixed premissions in advance of running set up. Have had the same happen when I activate the new Retina Macbook Pro without running setup and then running Migration ***'nt later.

  • I have a Macbook which is running Snow Leopard. I back up using time machine to an external drive. If I purchase a new Apple Macbook pro running Lion if I use the backup to this will I be able to use Leopard on the new computer

    I have a Macbook running Snow Leopard which I back up to an external drive using time machine.  If I purchase a new MacBook pro and transfer backup from time maching to MacBook Pro will it also transfer Snow Leopard as its is my preferred O.S.

    Welcome to Apple Support Communities.
    If the new computer did not originally ship with Snow Leopard installed, no, you will not be able to go back from Lion. Snow Leopard lacks the necessary drivers required for newer hardware.

  • New macbook pro running mountain lion does not work in clamshell mode when attached to a thunderbird display.

    I have a new macbook pro retina running mountain lion. I want to use it with a thunderbolt display. When I close the lid on the macbook pro, everything goes dark.

    Plug in the power to the laptop. Then it works.

  • HT204291 I have a MacBook Pro running Mavericks OS 10.9.2 and discovered that my airplay mirroing feature to my AppleTV (version 6.1) is not working. Is there any fix for it? I have been waiting for 4 months for a patch to come out. Any ideas?

    Any ideas on a patch or fix for the Airplay mirroing feature to AppleTV? Home sharing to AppleTV is also broken after I upgraded to Mavericks 10.9.2.
    Thanks.

    I do not get the Airplay icon on my Macbook's menu bar. I have checked the box in the Display settings to show mirroring options but still no icon. Airplay Display shows 'No device Detected'. Both AppleTV and MacBook Pro are on the same physical Network (192.168.1.0/24) and connected directly to my home ethernet switch (not wirelessly). I also made sure MacBook's Firewall is disable. Airplay feature use to work before upgrade to 10.9.2. As far as Home sharing from my AppleTV has a similar issue; it just does not find my MacBook after a while of loading and searching my music library. I am logged in to icloud on both devices (appletv and macbook). Also use to work before upgrade. Any ideas or recommendations. Thanks.

  • Macbook pro running slow on yosemite 10.10.2 ; also failing to recognise the wifi

    processor - 2.6ghz intel core i5
    memory- 8gb 1600 mhz ddr3

    Howdy niladrisg,
    If you are having an issue with your Mac running more slowly than expected, I would suggest that you troubleshoot using the steps in this article - 
    OS X Yosemite: If your Mac runs slowly
    For an issue with being unable to recognize a Wi-Fi network, use the steps in this article -
    About Wireless Diagnostics - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My macbook pro running on os yosemite is not connecting to vpn

    i have failed to connect to vpn

    Your Sophos anti-virus software is crashing a LOT. Uninstall it, and do not reinstall it.
    For information on how to properly protect yourself from malware, see my Mac Malware Guide.
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • I am asked to Sign in with my Apple ID each time I boot my Macbook pro running the current and updated version of Yosemite

    Each time I boot my Macbook Pro running a currently patched version of Yosemite I am asked to "Sign in with my Apple ID."  After that I have to approve the use of Find My Mac, and then I have to agree to the Terms and conditions of Use.   This is very annoying since I use Bootcamp a lot and it adds a fair effort to the reboot process.   Any thoughts?
    Some additional clues that may or may not have bearing on this.
    Once I am booted into Yosemite completely, if I open Safari (also current version)  I am told my Safari Extensions have been migrated and I have to re-enable each one individually.   They have all been disabled.   This will occur each time I completely close Safari and reopen it.
    I appreciate your thoughts and suggestions everyone!   Thanks in advance.
    Dave

    Hi chc517,
    I'm sorry to hear you are having issues with your MacBook Pro. I also apologize, I'm a bit unclear on a couple things about your specific configuration. The message you mentioned about the disk being encrypted would seem to indicate that you may have File Vault enabled. If that is the case and you are having a login issue, you would need to use the File Vault recovery key to reset your login password instead of your Apple ID, as noted in the following article:
    OS X Yosemite: FileVault recovery key
    Regards,
    - Brenden

  • I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

    I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions?  Please??? :-)

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard.  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard?  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
    1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
    2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
    You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
    After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
    3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

  • I have a late 2011 model MacBook Pro running Mountain Lion.  I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV?  I used to run a cable from my mini display port to the HDMI input of a TV.

    I have a late 2011 model MacBook Pro running Mountain Lion.  I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV?  I used to run a cable from my mini display port to the HDMI input of a TV.  This feature seems to be lost in the Mountain Lion upgrade.  Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV?  There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.

    Running a cable to the HDMI port is still supported. (and still works on mine).
    If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection.  Double check all cables.  If that doesn't work try a PRAM reset:
    http://support.apple.com/kb/ht1379

  • Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8!  Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all.  Doesn't happen each time I attempt to shutdow

    Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8!  Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all.  Doesn't happen each time I attempt to shutdowCan't

    There are some keyboard commands (shortcuts) you can use instead of having to go to the Apple menu -
    Control-Eject          This brings up the Restart-Sleep-Cancel-Shutdown window.
    Command-Option-Eject          This puts the machine to sleep.
    Command-Control-Eject          This closes all apps and restarts the machine.
    Command-Option-Control-Eject          This closes all apps and shuts the machine down.

  • I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

    I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609.  Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2.  My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

    Handoff Continuity Troubleshooting

  • How do i transfer files from pc to new macbook pro running yosemite

    I want to transfer documents, pictures and iTunes library from Dell pc running Windows Vista to new MacBook pro running Yosemite.

    Use the Migration Assistant, or move the files manually through file sharing or an external drive. If you've already set the MacBook Pro up and use the Migration Assistant, the files will be put into a different user account.
    (119281)

Maybe you are looking for