My Apple TV does not show all of the movies in my library.

All are in the movies category, no home videos here.  It almost seems to be movies that I have removed from a device.  At least some of the ones not showing up were recently removed from my iPad.  Came back from a trip and removed some of the movies that I had watched, but then my wife wanted to see them so we tried to pull them up on the Apple TV, but no luck.  I am not 100% sure that they were showing up on the Apple TV before, but I know they have been watched on my iMac.  I know all about the miscategorization of others but that is not an issue here.  Any thoughts?  Does the Apple TV have a limit???  Is it better to put them into a playlist when I want to see them?  I have about 15 more to add and if still no luck I may reload iTunes and let it refind the library and see what happens.  Thanks in advance for any help!
BTW my OS is iOS version 7.0.5, but that was not in the list.
Andy

I have the entire original Star Trek series on the computer, all tested, watched and working fine.  They are all MPEG-4 video files, and I can watch them on multiple computers and TVs when pulling directly from my network.  They are labeled "Star Trek Episode 15 Shore Leave" and so on.  Before I went out of town I loaded episodes 1-12 onto my iPad to watch while traveling.  Again, they played fine.  When I returned I had only watched the first three, so when I resynced my iPad I removed those three (episodes 1-3) and put on some other movies.  Tonight when I went to watch them on the Apple TV I find that those three specific episodes are missing from the Apple TV list, so the ST episodes start with #4.  Just kind of weird.  These episodes are all the same version, done at the same time, the same way, no differences between them, even in size.  Must can't figure out what is keeping them off of the list but it seems to be more than just coincidence that the three I notice missing are ones that I just removed from my iPad.
Also as to the iOS version you are correct, my typo, should be 10.7.5. 
Thanks for the help and just to clarify I checked with one of my purchased movies as well as the manual ones and two do not show up, both again removed with the last sync.  But they are still in the library!  Can't figure it.
Andy

Similar Messages

  • I tunes does not show all of the songs that are on my i pod

    When I go to i tunes it does not show all the music that is on my ipod, since I got a new computer. I didn't change usernames or accounts or anything, how do I fix theis?

    Where are you looking at in iTunes? Did you click the small black triangle next to your iPod under Devices in the left hand pane of iTunes to bring up a submenu of content.  Click the on Music one.  Is all of your content listed there?
    B-rock

  • Viewer does not show all of the clip

    Import routine:
    MTS format from Canon > Converting to Quicktime with Voltiac software. Resolution 1920x1080.
    Impossible to set correct In and Out points in the Viewer as the whole clip is not shown. Can change the duration of the clip in the Timeline as the whole clip is shown there. After rendering there are no problems in the Canvas.
    Anybody got a solution? Would be much appreciated!
    Regards,
    Tryg

    I'd be converting to 1440x1080 because FCE does not support 1920 without rendering.
    At any rate, why the whole clip does not show up in the Viewer and does in the Canvas eludes me.
    Al

  • I have rented a movie in ITunes, however it does not show up in the movies on my ATV, but purchased movies do. What's up?

    I have rented a movie through ITUNES, but it does not show up on my ATV movies menu as they have in the past in a category called rentals.  In fact that category isn't shown.  My purchased movies are showing up.  What's up?
    Bindlach61

    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

  • When I upload audio from itunes into my imovie project, it does not show all of the track?

    Hi, I have opened a new project in imovie - I have uploaded 200 photos into the project to make a Comic Book movie!
    this project is 7 mins and 8 seconds long - the exact length of the audio track that I want to play during the movie!
    I have selected the music by clicking the musical note button in imovie, which open up my itunes library and displays the track I want to use that is 7 mins and 8 seconds long.
    When I click and drag my MP3 audio from itunes into my imovie project, i only plays the first 5 mins & 33 seconds; leaving my project in silence for the final 1 min & 3 seconds????
    I have not added markers, there are no fade ins or fade outs - only the first 5 min & 33 seconds or a 7 min & 8 seconds MP3 Audio track???
    I have spent 10 hours trying to rectify this problem.......
    can anyone help me with this problem
    Peace, Love & Happiness
    Jayondrums

    Sounds like your talking about iMovie for Mac?
    This is the iOS version, repost here:
                                                      iMovie

  • I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

  • TS3798 My Apple TV Does NOT show the Internet menu option. Has all the other options but the Internet. I am connected to the Internet as I can  Rent, Buy ,etc..movies from the Apple Store...

    I have a first Genreation iPAD and just a new Apple TV, 3rd Generation. The Apple TV does not show the Internet menu option after booting up.

    There isn't one.
    AppleTV3 has icons for all the internet features.

  • I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

    I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

    http://support.apple.com/kb/TS1591
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black, when I try to synchronise my ipod to my library it comes up with a message saying "iTunes could not back up the ipod because a session could not be

    Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!

    Try this previous discusssion:
    https://discussions.apple.com/message/12518406#12518406

  • Why apple tv does not show in itune?

    why apple tv does not show in itune?

    Welcome to the Apple Community.
    I assume you have the Apple TV 1.
    Often a restart of ALL your equipment will help, it may also be a result of instaling or updating security software (check your security settings).
    If problems persist, navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring

    Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring  I have an iphone5 64 syncing about 8000 songs, so updating all is a time consuming, and now maddening process. Never had a problem before iOS 8. Someone (hello Apple) needs to develop a utility to help manage artwork recovery.

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • Address book of my mac does not show all my contacts in iphone. What do i do??

    Address book of my mac does not show all my contacts in iphone. What do i do??

    iCloud, which replaced MobileMe, requires OS X Lion (10.7.5) or higher.  You will need to upgrade to OS X Lion higher in order to set up iCloud on your Mac.  First check to see if your system meets the system requirements to upgrade.
    Lion system requirements are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Mountain Lion and Mavericks requirements are the same, as listed here: http://support.apple.com/kb/HT5842.
    If you can run Mavericks, you can download a free upgrade from the Mac App Store.  If your system can only run Lion, you can go here to purchase a redemption code to download it from the Mac App Store.  If you prefer Mountain Lion for software compatibility reasons, you can go here to purchase a redemption code to download it from the Mac App Store.
    After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
    Before upgrading, you may want to check the compatibility of your existing applications by checking here: http://roaringapps.com/apps:table.   Also be aware that older PPC programs such as AppleWorks and Office 2004 for Mac will not run on OS X Lion or higher.

  • Transaction MD04 does not show all open sales/orders deliverys

    Hi,
    Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
    Can anyone tell me the reason for this?
    Regards,
    Brijesh

    Hi
    Run SDRQCR21 report in Transaction SE38 for that material it will  resolve your issue.
    Please confirm
    Amit

  • Analysis does not show all rows returned by SQL

    Hi.
    OBIEE 11.1.1.7.0
    I have a strange problem.  I have a simple table that should return customer number and sales.  The report will show all of the sales, but it does not show all the customer numbers.  The SQL that OBIEE creates does return all of the customer numbers.  When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
    I guess what I'm looking for is any advice for how to debug this.  I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
    Any suggestions are appreciated.
    Thank you.

    Thank you for your reply.
    New development.  The issue has to do with a descriptor ID column.  The customer number column is a varchar field and I set the descriptor ID column to the column_ID field.  When I remove the descriptor ID setting, I received all custom numbers.

  • My contact list does not show all my contacts.

    My contact list does not show all my contacts.  If I keypad a number not shown in the contacts it does know who that contact is.  What can I do to show all contacts?  I have 352 contacts in the phone.

    Do you have different Groups for contacts?  For example, perhaps you have some contacts stored on the device, some associated with a Yahoo account, and others associated with an Exchange account.  If you have multiple groups like this, tap the "Groups" button at the top-left corner in Contacts and see if you're looking at only a subset of your contacts.  There is an option to view "All Contacts", which summarizes them all for you.

Maybe you are looking for

  • Events are not grouped by date

    Recently I had a crash on my iPhoto and had to basically re-input all 60,000 photos. All went well and iPhoto working okay now. Only issue is the events are not grouped by date anymore.  meaning I have several events that are on the same date. All th

  • Graphics from Forms or Reports

    When I am running graphics from forms or reports either using the chart wizard or by run_product built-in, I am getting error message OG-01603: UNABLE TO CREATE PL/SQL DEVELOPMENT ENVIRONMENT CONTEXT I am using Developer 6i. Please help me out. Thank

  • Not a preloader bar, but a movie progress bar

    I have a Flash slide show, and need to be able to tell the viewer how far along they are within it. Something similiar to what you see at the bottom of a Quicktime movie. Is this possible in Flash?

  • IPhone5s Replacement Needed?

    My phone is giving me an error saying Replacement Needed This iPhone is not able to complete the activation process and needs to be replaced. Please vist your nearest Apple store. Does this mean I have to get a NEW phone replaced from apple? Also the

  • Cinema Tools scales down my clip

    Summary of the issue I am putting a 1920x1080p 60fps clip into Cinema Tools to change the frame rate to 24fps using the simple "conform" function. The fps conversion is successful, but the clip is now 960x540. I have seen this situation reported on t