My audio plays for skype call participants

I just got a new headset (Mad Catz F.R.E.Q. 3) and since I started using this headset people I talk to on skype can hear what music I listen to or what games I play while skyping for some odd reason. I did some testing on this with Echo and found that even if I mute my microphone (not with the skype mute function, but on the actuall headset) any audio that I have on my PC will still be broadcast in skype. I tried using my old headset again (Steelseries Siberia v2) and then it worked perfectly, none of my audio was emitted to skype calls, but there has to be a setting somewhere that is at fault since my audio is heard even when my microphone is muted. I'm not sure if this makes any difference but I am also using a Deltaco external USB soundcard, that has never been problematic before though and I've used it for about 2.5 years now.
Thanks for taking your time to read this through (and also thanks for the help if you bother with that part)!

You would think with the audio sections of the motherboard being isolated from the rest of the components that it wouldnt have troubles like this. I have a request for support in with Gigabyte.

Similar Messages

Audio Plays for One Second

Does anybody know what's happening when the audio plays for about one second and then cuts out. This is the same for both imported tracks and included scores (AquoVisit, CityStreet). You can see an example of what I am talking about here.
If you know how to solve this problem, please answer and you'll receive points!!!
Notes:
I installed the trial version of the CS5 Master Collection from this page. I am running Mac OS X version 10.6.6 on a Summer 2007 "20 iMac. 2 GHz Intel Core 2 Duo processor and 3 GB 667 MHz DDR2 SDRAM. I installed the trail just today (this is my second install as I tried uninstalling every file and reinstalling it all, to no avail). I input a working serial after the trial installed and asked if I would like to input a serial or install as a trial.
Thank you!

From the video you posted, it appears that the audio driver is being released in some way, which automatically stops the player. There were some issues with OS X upgrade from 10.5 to 10.6 that affected the audio plist files.
The simplest suggestion is to:
1. Open Finder and navigate to /Library/Preferences (NOT your user library folder)
2. rename com.apple.audio.AggregateDevices.plist to something else , or drag it to the trash. It will be rebuilt.
3. Launch Soundbooth
If this fails to resolve the issue, see if you have the some problem in Premiere Pro and let me know the results. We can continue to troubleshoot.

How to turn on microphone on iPhone 6 for Skype calls. I see a picture of a microphone with a red line drawn through it. Thanks.

ow does one turn on the microphone for Skype calls on a iPhone 6 ? I can see (video) the person with the iPhone 6 and they can see and hear me but they cannot speak as their iPhone 6 shows a symbol that says "microphone" with a line drawn through it. Please help. Thank You.

http://www.apple.com/iphone/LTE/
According to Apple's list (link above) you will probably want to pick up a Sprint or US Cellular model. HOWEVER, as I mentioned above I know that the Verizon iPhones come unlocked from the factory (assuming it will be the same for iPhone 6 and 6+). I DO NOT KNOW if the Sprint and US Cellular models come unlocked. But I am sure some quick internet research will lead you to the answer.
I think your goal would be to get a Sprint or US Cellular version. Also I believe a law was just recently passed that allows someone to have a phone unlocked by the carrier no questions asked. So even if the Sprint and US Cellular iPhones are locked you can have them unlocked.
Update:
http://www.cbsnews.com/news/obama-signs-bill-unlocking-cellphones/

EMU 1616 with Shure58S/58SE for skype calls?

Hello!
I've sent this question to Thomann.de support, but I didn't get anything useful in return..
Basically I want to buy this bundle - http://www.musicstore.de/en_EN/LVL/_SET_-Shure-SM58SE-inkl.-Stativ-Kabel/art-PAH109
And I have a bit older version of this card (1616 instead of 1616M):
http://www.musicstore.de/en_EN/LVL/EMU-1616m-PCIe-16-In-16-Out-FX/art-PCM0008873-000
Will this microphone work on skype, for voice calls?...
Usual PC microphones don't work with 1616 card (as they are not active microphones). My work involves skype calls and I can't call when 1616 is connected. At least not with usual PC microphone.
So I'm using integrated sound card for quite a while...
Will this mic work for this? Please advise.
Best wishes,
Aleks

You and I had the good sense to see tremendous value in the E-Mu 1616 MicroDock audio interface. Unfortunately, apparently few other people did, or maybe E-Mu would still be in business.
Where to start.
Until recently, I used a headset under Windows XP with no problem. Not even sure how I had Patchmix set up, but I knew NOTHING of ASIO outputs in those days, so might not even have had a Send inserted somewhere. I was able to use both a headset mic (see below), and/or a phantom-powered condenser with Skype audio-call sessions. I upgraded to Windows 7 in Jan 2013, and although I've used Skype rarely since then, my call record shows that I made a long call last summer, so it must have worked. In the fall, I updated what may have been a very old version of Audacity, and suddenly could no longer get 1616 sound into Audacity. I've since learned that Audacity doesn't support ASIO, and apparently there's no other way to interface them. (Using properly matched ASIO "send" inserts, I can still use my mics with Pro Tools.) I also use a product called Total Recorder, which I generally have set up to record from "software" (as opposed to a mic input), and used to regularly put me on one channel and the other person on the other channel.
Now I find that Skype doesn't hear the 1616. Total Recorder doesn't (although their earnest support dept has assured me it should, and should not depend on getting the sound via ASIO -- I have yet to check their report fully, but my first try was unsuccessful). And the Skype situation is a total mystery -- it says my microphone is working properly, but neither the Call Quality record/play test, nor the test call will hear it, whatever I have tried. (And I swear I've tried and triple checked everything, even removing other recently added audio software and reverting to a week-old Restore Point. (I dare not go back months, if that is even possible.)
Skype does "hear" a USB headset that I plugged in just for testing. Windows foudn and loaded drivers for it, and I made a successful test call. Although of course in comparison, the headset's audio sucked.
So, although I have no hands-on experience with the SM58 my short answer is: Yes, it should work with any professional dynamic or condenser mic. But in my case, it still does, but Skype suddenly does not work with it.
Supposedly "correct" configuartion for Skype.
http://support.creative.com/kb/ShowArticle.aspx?sid=87610
To use an ordinary telephone headset with the MicroDock, you need an amplifier of sort between them. (Which was news to me until a guy deep in Plantronics nicely explained -- apparently headphones use an electret approach?) With suitable mono/stereo adapters etc., an Andrea APS-100 Battery Box should do the trick. I got mine from eMicrophones, but a search may turn up other current sources. About $12 plus shipping. It uses a AAA battery, and fidelity is okay for phone use. I don't know if it would be the correct solution (or at all a solution) for a low-output (cheap tape recorder) dynamic mic. That probably would call for a conventional pre-amp of some kind, although the mic I just tried seems to give signal enough.
By the way, I tried your link to the 1616m and succeeded in putting into a cart, where it says they have it "in stock." Some nerve! Okay, a bit of thanks to Creative Inc. for not doing away with the E-MU site entirely, but how does anyone have the chutzpah to sell the thing when there is no support, no "official" driver (just a 2010 beta and 2009 documentation), nobody there, no active forms or email, and their forum is virtually dormant?

My microphone doesn't work for calling but it does for skype calling

My iPhone 4 has a problem with the microphone. When I call or when I'm called, I can hear what the other person says on the line but they can't hear me. I recently tried Voice Memos and the microphone works fine. I also try Skype calling and the microphone was working fine also, and it wasn't on loud speaker either. I need help and I tried going to Apple in Perth, Australia and they said they would not fix it or replace it. Please help if you can. Thank you.

ALthough you can look it up yourself to the right in "More Like This"
following is the reply from Judysing to someone with your same problem:
Welcome to the Support Communities!
As a first step, I would suggest restarting and/or resetting the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Here are some additional troubleshooting steps for sound on your iPhone:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630

Theme audio plays for first few seconds of menu before dropped audio

I created my first iDVD movie, and added a .wav file to the main menu. I also used a theme from iDVD4 (montage). When I preview the movie, however (and after burning, this is also on the final DVD), the theme audio plays very loudly for a few seconds while the main menu is booting up, before kicking over to the added audio. Is there any way to make this themed audio clip (which does not appear anywhere, all the audio wells have my added audio clip) disappear, so that I don't have to hear blindingly loud music for 5 second while the DVD boots up the main menu?

check out the following link (altho the topic is not yet answered) may help with your sceanrio as well:
http://discussions.apple.com/thread.jspa?messageID=4504981&#4504981

USB headset drops audio input during Skype call

I just bought a new iMac. When I initiate a Skype call using the H650e, almost immediately after the call connects the H650e loses audio input. I speak into the mic but the person I'm speaking with can't hear me. When I open the audio preference pane, I see that the H650e is selected as the input device, but the levels are not registering when I speak.
This problem is reproducible; it happens every time I use the microphone with Skype on the iMac. However, it does not happen when I use it with Skype on my Macbook Air.
That suggests the problem might be with the iMac, but Apple is claiming they can't help because it's a non-Apple product. Logitech claims they can't help since the headset works with the Macbook Air. And Skype claims the same.
What now?

fyi ....
i ran a quick repair permissions with disk utility and the problem seems to have sorted itself out. on further thought i think this started to happen after i downloaded the latest s/w update from apple - i recall a whole bundle of fixes to various powerpc issues...maybe something here upset the balance.

Skype call participants can hear my computers audi...

I know, I have gone through and read the other hundred plus posts about the same issue but none of the solutions has worked for me. I recently switched from a USB headset to a new analog (3.5mm) HyperX Cloud headset. As soon as I made the switch my friends started complaining that my games/music/video's and other system sounds were comming through in the call.
Hardware involved:
Motherboard onboard sound; Gigabyte Z97X Gaming 3 motherboard
Audio driver Realtek HD Audio Driver R3.94 downloaded from Gigabyte's driver downloads.
Headset: HyperX Cloud
OS: Windows 7 64bit
To trouble shoot I have;
ninstalled and reinstalled the drivers-No effect
Muted my mic-Sounds still comming through to friends in skype
Tried every combination of audio jacks-No effect
Made sure sound mixing was disabled under recording devices
Enabled jack separation and echo noice cancellation in my audio driver software
Nothing works.

You would think with the audio sections of the motherboard being isolated from the rest of the components that it wouldnt have troubles like this. I have a request for support in with Gigabyte.

Jawbone2: Must choose Jawbone from Audio Source for Incoming Calls

Had the original Jawbone and just got the new Jawbone. Love it except I must choose Audio Source>Jawbone for all incoming calls. All I had to do with the original Jawbone was 'slide to answer'.
I did unpair the headset, turned off Bluetooth and did reset the Jawbone but re-pairing the headset.
Any ideas?

I have the same problem. I emailed customer support at Jawbone and this is the response I got back from them. So I followed the instructions but I had little hope. I did it 2x. No help.
Response (Chris) - 06/12/2008 10:57 AM
Hi Ross,
I understand your problem and have a fix for it. I have experienced the same problem. To fix this reset the Jawbone and iPhone and then repair them. Also make sure that if this happens again that you use the headset because the New Jawbone has an idle feature that goes in to effect after 15 minutes.
Sincerely,
Chris
The Jawbone Support Team
www.jawbone.com
Customer (ross brookshire) - 06/10/2008 11:36 AM
So I had an original Jawbone and didn't have this problem on my iphone. Thank god you guys made a magsafe type connector for the power cord.
Anyways, when I receive a phone call on my
iphone if I use my phone to accept the call, the phone answers and says that it is using the headset. But I can't hear anything. But if I put the phone up to my ear I can hear the conversation. So then I have to go to the audio source on the iphone and change it to headset.
But if I answer it using the jawbone button it works fine. I know the answer is to just use the headphone. But I didn't have to with the old one. What else can be done.
Thanks for the help.
RBB

Audio plays for a second then goes dead

It doesn't happen every time, but often, when I move the playhead to part of the file (in waveform editor or in a multitrack project) I only get a second or two of audio.
The playhead continues to move, but I don't get any further audio and the meters don't show anything either.
I have 10.4.3. Dual 800 Quicksilver (the first Quicksilver). I'm listening to the audio through the digital audio port (not an optical port - the powered port that they used for those Harmon Kardon speakers. It's not even actually digital, they just call it that for some reason). Speakers are plugged directly into the computer with this breakout cable: http://www.griffintechnology.com/archive/audio/prospeaker.html I don't think that is my problem, but thought I would provide the information just in case (the meters in Soundtrack go dead as well, which indicates to me that this is a software issue of some sort)

I am having the same issue. I've tried connecting a variety of speakers including headphones to the Airport Express 802.11n with all the latest and greatest firmware updates. Same result with all. I've tried switching back and forth from Computer to Airport Exress and even Multiple Speakers. Computer output is fine even with Multiple Speakers. Nothing but a blip via Airport Express. My old Airport Express 802.11b/g worked fine in this exact configuration before it died. This replacement Airport Express 802.11n isn't showing me the love.

CUBE- one way audio intermittent for inbound calls

     Have a CUBE on 3800 with 15.14M(6) with SIP to SIP dial peers. Some external inbound callers at times can hear no audio streaming from IVR.
I run a traffic capture from the LAN side of the CUBE and I can hear the audio.
I run a traffic capture on the WAN side (towards caller) and i hear nothing, BUT the rtp stream is active (50 pps G711a). When i replay this stream on Wireshark i hear silence exactly what the caller can hear...
G711a on both sides but no audio is heard on the WAN side exiting the CUBE towards telco
DIal peers matched= 31 In from itsp and 40 Out to CUCM
Setup:
ITSP--SIP Trunk-- MyCUBE--SIP Trunk--CUCM--IVR(CTI Ports and RPs)
                                                                        |
                                                                 7900 Type A sccp Handsets
Config attached

hi,
Yes my itsp can connect and see that interface. Most calls work and only some fail. Intermittent. I have incuded a "show call active voice" for a "failed" incoming call from 0204002244 to 0498870440 . What happens here is silence to external caller coming in on dial peer 31 but there is an RTP stream being sent to him. Wireshark trace on WAN side proves silence within RTP stream exiting CUBE towards callers SBC at 10.193.202.100 from my cube at 10.66.41.1
GENERIC:
SetupTime=12:24:35.980 AEDT Thu Jan 30 2014
Index=1
PeerAddress=0204002244
PeerSubAddress=
PeerId=31
PeerIfIndex=192
LogicalIfIndex=0
ConnectTime=12:24:36.080 AEDT Thu Jan 30 2014
CallDuration=00:00:43 sec
CallState=4
CallOrigin=2
ChargedUnits=0
InfoType=speech
TransmitPackets=2196
TransmitBytes=351360
ReceivePackets=2194
ReceiveBytes=351040
VOIP:
ConnectionId[0x1D4C7D6F 0x888411E3 0xA9FBFF95 0xBEE5C848]
IncomingConnectionId[0x1D4C7D6F 0x888411E3 0xA9FBFF95 0xBEE5C848]
CallID=5201
GlobalCallId=[0x1D4C7D6F 0x888411E3 0xA9FEFF95 0xBEE5C848]
CallReferenceId=0
CallServiceType=Unknown
RTP Loopback Call=FALSE
RemoteIPAddress=10.193.202.100
RemoteUDPPort=14804
RemoteSignallingIPAddress=10.193.202.100
RemoteSignallingPort=5060
RemoteMediaIPAddress=10.193.202.100
RemoteMediaPort=14804
RoundTripDelay=0 ms
SelectedQoS=best-effort
tx_DtmfRelay=inband-voice
FastConnect=FALSE
AnnexE=FALSE
Separate H245 Connection=FALSE
H245 Tunneling=FALSE
SessionProtocol=sipv2
[email protected]
SessionTarget=10.193.202.100
SafEnabled=FALSE
OnTimeRvPlayout=0
GapFillWithSilence=0 ms
GapFillWithPrediction=0 ms
GapFillWithInterpolation=0 ms
GapFillWithRedundancy=0 ms
HiWaterPlayoutDelay=0 ms
LoWaterPlayoutDelay=0 ms
TxPakNumber=0
TxSignalPak=0
TxComfortNoisePak=0
TxDuration=0
TxVoiceDuration=0
RxPakNumber=0
RxSignalPak=0
RxComfortNoisePak=0
RxDuration=0
RxVoiceDuration=0
RxOutOfSeq=0
RxLatePak=0
RxEarlyPak=0
RxBadProtocol=0
PlayDelayCurrent=0
PlayDelayMin=0
PlayDelayMax=0
PlayDelayClockOffset=0
PlayDelayJitter=0
PlayErrPredictive=0
PlayErrInterpolative=0
PlayErrSilence=0
PlayErrBufferOverFlow=0
PlayErrRetroactive=0
PlayErrTalkspurt=0
ClockAdjustDuration=0
EarlyPacketDuration=0
LateDiscardDuration=0
SilenceDiscardDuration=0
JBuffDecreaseDuration=0
JBuffIncreaseDuration=0
OutSignalLevel=0
InSignalLevel=0
LevelTxPowerMean=0
LevelRxPowerMean=0
LevelBgNoise=0
ERLLevel=0
ACOMLevel=0
ErrRxDrop=0
ErrTxDrop=0
ErrTxControl=0
ErrRxControl=0
ReceiveDelay=0 ms
LostPackets=0
EarlyPackets=0
LatePackets=0
SRTP = off
TextRelay = off
VAD = disabled
CoderTypeRate=g711alaw
CodecBytes=160
Media Setting=flow-through
CallerName=
CallerIDBlocked=False
OriginalCallingNumber=0204002244
OriginalCallingOctet=0x0
OriginalCalledNumber=0498870440
OriginalCalledOctet=0x0
OriginalRedirectCalledNumber=
OriginalRedirectCalledOctet=0x80
TranslatedCallingNumber=0204002244
TranslatedCallingOctet=0x0
TranslatedCalledNumber=0498870440
TranslatedCalledOctet=0x0
TranslatedRedirectCalledNumber=
TranslatedRedirectCalledOctet=0x80
GwReceivedCalledNumber=0498870440
GwReceivedCalledOctet3=0x0
GwReceivedCallingNumber=0204002244
GwReceivedCallingOctet3=0x0
GwReceivedCallingOctet3a=0x80
MediaInactiveDetected=no
MediaInactiveTimestamp=
MediaControlReceived=
LongDurationCallDetected=no
LongDurCallTimestamp=
LongDurcallDuration=
Username=0204002244
MlppServiceDomainNW=0 (none)
MlppServiceDomainID=
PrecedenceLevel=0 (PRECEDENCE_LEVEL_NONE)
CPA Active Call Parameters
CPA Event Status: DISABLE
GENERIC:
SetupTime=12:24:35.994 AEDT Thu Jan 30 2014
Index=1
PeerAddress=2440
PeerSubAddress=
PeerId=400
PeerIfIndex=202
LogicalIfIndex=0
ConnectTime=12:24:36.074 AEDT Thu Jan 30 2014
CallDuration=00:00:43 sec
CallState=4
CallOrigin=1
ChargedUnits=0
InfoType=speech
TransmitPackets=2196
TransmitBytes=351360
ReceivePackets=4396
ReceiveBytes=703360
VOIP:
ConnectionId[0x1D4C7D6F 0x888411E3 0xA9FBFF95 0xBEE5C848]
IncomingConnectionId[0x1D4C7D6F 0x888411E3 0xA9FBFF95 0xBEE5C848]
CallID=5202
GlobalCallId=[0x1D4C7D6F 0x888411E3 0xA9FEFF95 0xBEE5C848]
CallReferenceId=0
CallServiceType=Unknown
RTP Loopback Call=FALSE
RemoteIPAddress=10.66.22.20
RemoteUDPPort=31334
RemoteSignallingIPAddress=10.66.22.20
RemoteSignallingPort=5060
RemoteMediaIPAddress=10.66.21.20
RemoteMediaPort=31334
RoundTripDelay=0 ms
SelectedQoS=best-effort
tx_DtmfRelay=rtp-nte
FastConnect=FALSE
AnnexE=FALSE
Separate H245 Connection=FALSE
H245 Tunneling=FALSE
SessionProtocol=sipv2
[email protected]
SessionTarget=10.66.22.20
SafEnabled=FALSE
OnTimeRvPlayout=0
GapFillWithSilence=0 ms
GapFillWithPrediction=0 ms
GapFillWithInterpolation=0 ms
GapFillWithRedundancy=0 ms
HiWaterPlayoutDelay=0 ms
LoWaterPlayoutDelay=0 ms
TxPakNumber=0
TxSignalPak=0
TxComfortNoisePak=0
TxDuration=0
TxVoiceDuration=0
RxPakNumber=0
RxSignalPak=0
RxComfortNoisePak=0
RxDuration=0
RxVoiceDuration=0
RxOutOfSeq=0
RxLatePak=0
RxEarlyPak=0
RxBadProtocol=0
PlayDelayCurrent=0
PlayDelayMin=0
PlayDelayMax=0
PlayDelayClockOffset=0
PlayDelayJitter=0
PlayErrPredictive=0
PlayErrInterpolative=0
PlayErrSilence=0
PlayErrBufferOverFlow=0
PlayErrRetroactive=0
PlayErrTalkspurt=0
ClockAdjustDuration=0
EarlyPacketDuration=0
LateDiscardDuration=0
SilenceDiscardDuration=0
JBuffDecreaseDuration=0
JBuffIncreaseDuration=0
OutSignalLevel=0
InSignalLevel=0
LevelTxPowerMean=0
LevelRxPowerMean=0
LevelBgNoise=0
ERLLevel=0
ACOMLevel=0
ErrRxDrop=0
ErrTxDrop=0
ErrTxControl=0
ErrRxControl=0
ReceiveDelay=0 ms
LostPackets=0
EarlyPackets=0
LatePackets=0
SRTP = off
TextRelay = off
VAD = disabled
CoderTypeRate=g711alaw
CodecBytes=160
Media Setting=flow-through
AlertTimepoint=12:24:36.004 AEDT Thu Jan 30 2014
CallerName=
CallerIDBlocked=False
OriginalCallingNumber=0204002244
OriginalCallingOctet=0x0
OriginalCalledNumber=0498870440
OriginalCalledOctet=0x0
OriginalRedirectCalledNumber=
OriginalRedirectCalledOctet=0x80
TranslatedCallingNumber=00204002244
TranslatedCallingOctet=0x0
TranslatedCalledNumber=2440
TranslatedCalledOctet=0x0
TranslatedRedirectCalledNumber=
TranslatedRedirectCalledOctet=0x80
GwReceivedCalledNumber=0498870440
GwReceivedCalledOctet3=0x0
GwOutpulsedCalledNumber=2440
GwOutpulsedCalledOctet3=0x0
GwReceivedCallingNumber=0204002244
GwReceivedCallingOctet3=0x0
GwReceivedCallingOctet3a=0x80
GwOutpulsedCallingNumber=00204002244
GwOutpulsedCallingOctet3=0x0
GwOutpulsedCallingOctet3a=0x80
MediaInactiveDetected=no
MediaInactiveTimestamp=
MediaControlReceived=
LongDurationCallDetected=no
LongDurCallTimestamp=
LongDurcallDuration=
Username=0204002244
MlppServiceDomainNW=0 (none)
MlppServiceDomainID=
PrecedenceLevel=0 (PRECEDENCE_LEVEL_NONE)

Audio plays for 4 seconds only

If I play a clip on a timeline in Encore DVD, the video plays in the monitor fine but the audio will stop after 4 seconds. This happens each time I start playback. The DVDs that I burn work fine, it is just a problem when working with clips on the timeline.

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that incomplete track from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and click the arrow to the left of it, and then use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

Audio plays for menu but not for the movie??

Hi-
I made a dvd with music from an mp3 playing over the menu. It works fantastically. Then when I play the movie, the audio is GONE.
Note: I CAN get the movie audio to play when I increase the music level of the menu audio, but then when that happens the audio of the menu gets extremely distorted because its too loud. I dont want the level of the menu audio louder than the movie audio anyway. Anyone run into this?

Hi
iMovie and iDVD seems to have problems with various audio formats.
iTune music - goes silent on DVD disc etc.
Way around (and I allways do):
• convert all audio esp .mp3 and from iTunes to .aiff
• import this into iMovie then after edit closing iMovie
• open iDVD and import the movie project
(I never use the Share/Export to iDVD function in iMovie)
Yours Bengt W

I have a mac osx tiger. The camera light is not showing on. Can no longer receive or send video feed for skype calls. How can I get my camera back to working? Thanks Madhu

I have a mac os x tiger. The camera light is not showing as on. I can no longer receive or send video feed. How can I set my camera back to on?
Thanks Madhu

Troubleshooting the iSight camera:
http://support.apple.com/kb/HT2090
and
http://support.apple.com/kb/HT2090

Would like to have a camera on front of phone for skype calling

seems like this feature would have been a given on the droid x.

fcgiii wrote:
One can always talk facing a mirror.
True.You would get someone talking back to you

My audio plays for skype call participants

Similar Messages

Maybe you are looking for