My battery if you charge provided that is connected to the electric current, I believe is a false contact between the battery and the electric current

my battery if you charge provided that is connected to the electric current, I believe is a falsecontact between the battery and the electric current

what problems are you experiencing? It is difficult to understand your English

Similar Messages

Need to check tls/ssl but getting stuck with "You must provide a value expression on the right-hand side of the '-' operator."

I would like to disable ssl 3 but need to test what sites only support ssl 3. I keep getting stuck with an error that is over my head. I've tried manipulating the string a dozen different ways and keep getting the same error. I am not familiar with -notin
or how to specify which part of the property its checking: thanks a ton
http://blog.whatsupduck.net/2014/10/checking-ssl-and-tls-versions-with-powershell.html
line with issues:
$ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
You must provide a value expression on the right-hand side of the '-' operator.
At S:\scripts\test23.ps1:50 char:126
+ $ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name - <<<< noti
n @("Default","None") | %{$_.Name}
+ CategoryInfo : ParserError: (:) [], ParseException
+ FullyQualifiedErrorId : ExpectedValueExpression
<#
.DESCRIPTION
Outputs the SSL protocols that the client is able to successfully use to connect to a server.
.NOTES
Copyright 2014 Chris Duck
http://blog.whatsupduck.net
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
.PARAMETER ComputerName
The name of the remote computer to connect to.
.PARAMETER Port
The remote port to connect to. The default is 443.
.EXAMPLE
Test-SslProtocols -ComputerName "www.google.com"
ComputerName : www.google.com
Port : 443
KeyLength : 2048
SignatureAlgorithm : rsa-sha1
Ssl2 : False
Ssl3 : True
Tls : True
Tls11 : True
Tls12 : True
#>
function Test-SslProtocols {
param(
[Parameter(Mandatory=$true,ValueFromPipelineByPropertyName=$true,ValueFromPipeline=$true)]
$ComputerName,
[Parameter(ValueFromPipelineByPropertyName=$true)]
[int]$Port = 443
begin {
$ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
process {
$ProtocolStatus = [Ordered]@{}
$ProtocolStatus.Add("ComputerName", $ComputerName)
$ProtocolStatus.Add("Port", $Port)
$ProtocolStatus.Add("KeyLength", $null)
$ProtocolStatus.Add("SignatureAlgorithm", $null)
$ProtocolNames | %{
$ProtocolName = $_
$Socket = New-Object System.Net.Sockets.Socket([System.Net.Sockets.SocketType]::Stream, [System.Net.Sockets.ProtocolType]::Tcp)
$Socket.Connect($ComputerName, $Port)
try {
$NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
$SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
$SslStream.AuthenticateAsClient($ComputerName, $null, $ProtocolName, $false )
$RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
$ProtocolStatus["KeyLength"] = $RemoteCertificate.PublicKey.Key.KeySize
$ProtocolStatus["SignatureAlgorithm"] = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
$ProtocolStatus.Add($ProtocolName, $true)
} catch {
$ProtocolStatus.Add($ProtocolName, $false)
} finally {
$SslStream.Close()
[PSCustomObject]$ProtocolStatus
Test-SslProtocols -ComputerName "www.google.com"

V2 version:
function Test-SslProtocols {
param(
[Parameter(
Mandatory=$true,
ValueFromPipelineByPropertyName=$true,
ValueFromPipeline=$true
)]$ComputerName,
[Parameter(
ValueFromPipelineByPropertyName=$true
)][int]$Port = 443
begin {
$protocols=[enum]::GetNames([System.Security.Authentication.SslProtocols])|?{$_ -notmatch 'none|default'}
process {
foreach($protocol in $protocols){
$ProtocolStatus = @{
ComputerName=$ComputerName
Port=$Port
KeyLength=$null
SignatureAlgorithm=$null
Protocol=$protocol
Active=$false
$Socket = New-Object System.Net.Sockets.Socket('Internetwork','Stream', 'Tcp')
$Socket.Connect($ComputerName, $Port)
try {
$NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
$SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
$SslStream.AuthenticateAsClient($ComputerName, $null, $protocol, $false )
$RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
$protocolstatus.Active=$true
$ProtocolStatus.KeyLength = $RemoteCertificate.PublicKey.Key.KeySize
$ProtocolStatus.SignatureAlgorithm = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
catch {
Write-Host 'Failed'
finally {
New-Object PsObject -Property $ProtocolStatus
$SslStream.Close()
Test-SslProtocols -ComputerName www.google.com
¯\_(ツ)_/¯

Are AASPs allowed to charge customers that will qualify for the 1st Gen iPod nano recall?

Are AASPs allowed to charge customers that will qualify for the 1st Gen iPod nano recall? There are no Apple stores in the Philippines, only AASPs. Early reports from customers claim that one of the AASPs is charging a 10% discounted price for the replacement. We need clarification from Apple if the AASPs are allowed to do this since this seems counter to what the replacement program is supposed to do. I will not name the AASP for now until I personally confirm the reports.

There are no Apple stores in my country either, i went yesterday to one of those AASP but they didnt charge me or said anything about a price, just checked the screen, wheel and frame i guess to see if there was anything broken because they didnt turn it on. Confirmed the serial number, gave me a receipt and told me to come back in six weeks with the receipt to get my ipod back. I dont think they are supposed to charge you

It's like my battery died, blach screen and just appears the "charge symbol" when i connected to the current

it's like my battery died, blach screen and just appears the "charge symbol" when i connected to the current And when it is restored error 1602 on itunes. I'm desperate

I suppose. I tried with external charger, computer, change the usb port but nothing. But for example when it comes to wanting to restore the registry if it recognizes itune and attempts to restore it but stops and i am getting an error 1602

Tutorials in SWF output format prompted "Do you trust this content to connect to the Internet?" when opening another SWF file

Please help.
I have a tutorial with in the output format of SWF and HTM. I have click boxes that On Success will open another tutorial (SWF file). When I click on the click box, I get prompted “Do you trust this content to connect to the Internet?” by the Adobe Flash Player. I can click “Yes” and continue, however I don’t want the user to get prompted for every click box with this action (there is one for every tutorial and navigation buttons to each tutorial). I also think that SCORM can't handle the prompt, because when I run the tutorial from the LMS the click boxes do not work at all.
I have tried selecting “Always allow” in the Global Security Settings panel as per the instruction on this website: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l.
Any ideas?

Hi,
I wanted to add on a question to this posting.... I believe Rod's instructions must be followed on a per-PC basis, correct? Is there any way to disable this globally when/after I publish the files rather than telling 1000 users across the globe that they have to change their security settings? I don't think so from the article (very thorough) but just hoping there's something I can do?!
Thank you!
Michele

How to get the health , performance information and about the services run on devices that have connected to the system center?

Hi All,
I want to know how to get the health , performance information and about the services run on devices that have connected to the system center to my c# application. Also I need to know about the information of databases that have connected to system center.
I will appreciate your feedback
Thank you

Hi,
You can configure service monitor for the required service on the server
refer below link for how to configure service monitoring
http://www.bictt.com/blogs/bictt.php/2011/03/17/scom-monitoring-a-service-part3
You can use SCOM SDK to connect to the scom server using c# and get required information
http://msdn.microsoft.com/en-us/library/hh329086.aspx
you can find the database in below registry path on management server
HKLM:\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Setup\DatabaseName
Regards
sridhar v

Getting Message: "Do you trust this content to connect to the internet? Yes or No" . How do I get rid of this?

I have created a set of lessons in Captivate 5. Since the Adobe update of Flash Player to version 15 whenever we launch a new activity from the menu we are prompted by a popup which asks: 'Do you trust this content to connect to the internet? Yes or No'. None of the content requires an internet connection. Are others having this issue? How can we get rid of it?
Thanks

Most likely, you have a web plugin that depends on the Java runtime distributed by Apple, such as the Facebook video calling plugin or the "NexDef" plugin for watching baseball streams. If you no longer need the plugin, remove it. Otherwise, install Java.

To find the user processes that are connected to a database currently ??

Hi,
I wish to find the user processes that are connected to a database currently.
How to find this ?
any specific table/view for this ??
Thanks.

Hi..
You can use
SELECT NVL(s.username, '(oracle)') AS username,
s.osuser,
s.sid,
s.serial#,
p.spid,
s.status,
s.module,
s.machine,
s.program,
TO_CHAR(s.logon_Time,'DD-MON-YYYY HH24:MI:SS') AS logon_time
FROM v$session s,
v$process p
WHERE s.paddr = p.addr
ORDER BY s.username, s.osuser;
HTH
Anand

How do I see the clients that are connected to the access point?

Hello,
In Wireless Control System (WCS), how do I see all the clients that are connected to the Access Point? I can do a particular search that if I know the mac address. But what I really like to know is that which clients is connected to the network. That means it sould be able to show me, example, Client A is connected to AP 1. The problem in WCS is that I can't do that. Can some please advice how I am able to do this? Thanks.

Two ways:
First:
Under monitor, go to Access Points, then chose the target AP and click on it to open a menu, go to the Current Associated Clients tab.
Second:
User the search tool on your upper right corner, type in the target AP name, execute the search, on the results, click view list, on the list chose you AP and then go to the Current Associated Clients tab.
Enjoy.
Phil.

My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, I can't buy the app because it says we need to update the software. The thing is, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

HELPPP ME BEFORE CHRISTMASS MORNING!!

A connection to the SharePoint site cannot be established. To synchronize or refresh your list, you must be able to connect to the SharePoint site

Hi,
I have a SharePoint 2010 farm with two Web Applications.
For example:
https://contoso.domain.com
https://finance.domain.com
Both Webapp use https --> 443. Same valid certificate for both (*.domain.com)
I tested exporting an Excel library in https://contoso.domain.com.
It export and sync up sucessful the Excel library and it updates it OK.
However, once exported the Excel library in https://finance.domain.com, when
I try to syncronize or update the library I receive an error back, which indicates: "A connection to the SharePoint site cannot be established. To synchronize or
refresh your list, you must be able to connect to the SharePoint site". I had tested the WebDav (Map Network Drive) and the connection results OK.
Do you have any idea about this issue?? Why https://finance.domain.com do not
synchronize or refresh in excel o SharePoint site???
I had tested the security with IIS, SSL, WebDav.
Thank you,
Gaby

Hi!!!
I solved this problem.
I created a new Application Web in the farm (https://project.domain.com), dismount content database the old application web ( https://finance.domain.com)
and the new application web (https://project.domain.com).
#New AppWeb project.domain.com
Get-SPContentDatabase -WebApplication https://project.domain.com | Dismount-SPContentDatabase -WhatIf
#Old AppWeb
Get-SPContentDatabase -WebApplication https://finance.domain.com | Dismount-SPContentDatabase -WhatIf
Mount the old content database to the new application web (https://project.domain.com).
Mount-SPContentDatabase "WSS_Content_Finance" -DatabaseServer "MyServer" -WebApplication https://project.domain.com
If you want to keep the same url, change the alternate access mappings.
Remember to change the bindings in IIS.
Hope you help the solution...
Gaby

When i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet ?

when i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet,wht is that supose to mean i allredy connected to the inter net but i dont know how to make sure that my network sitting is correct help me plz

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy.

cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?

Try restarting your WiFi router by removing power to it for 30 seconds.

Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

Yes, that's one of the things airplay is for...

For the ipad 2, what do you do when it says connection to the server failed?

For the ipad 2, what do you do when it says connection to the server failed ? This has happened for the past two days. I have changed nothing. It happens at home and at work. What do you do? What has happened? Thank you.

What are you trying to do when you get this error message? Is it related to mail, connecting to the iTunes store, Facebook/iMessage, your internet ISP? All of these are different servers.
 Cheers, Tom

My battery if you charge provided that is connected to the electric current, I believe is a false contact between the battery and the electric current

Similar Messages

Maybe you are looking for