RFC to Flat file XSLT mapping

Hi all,
we are working on RFC to Flat file XSLT mapping.
RFC Structure
RFC Name
--Item
f1
f2
f3
FLAT File Structure
MT_FF
--Record
f1
f2
f3
Can somebody provide the XSLT code template for the same.....

The issue is solved. I used Altova MapForce to generate the code. Thank you.

Similar Messages

Dynamic file name from input payload (RFC 2 flat file)

Hi,
I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
What can I do?

Hi Marshal,
You can add a extra node to your target strucutre like
FileName- Node
--FileName - Element.
do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this field path at Refrence in variable subtituion.
In the Content converison add the Name & Values as below
FileName.fileldNames -- FileName
FileName.fieldFixedLengths -- 0
FileName.fixedLengthTooShortHandling -- Cut
So the extra field in u r target structure would not populate in u r target text file.
Cheers
Veera

How to test the RFC to Flat File scenario

Hi,
How to test the RFC to Flat File scenario
regards,
kiran

Hi,
After running the RFC it's going Dump.
this is the error message i got.
"Error analysis
An error occurred when executing a Remote Function Call.
"CPI-C error CM_RESOURCE_FAILURE_NO_RETRY"
Status of connection.... "CODE=CM_RESOURCE_FAILURE_NO_RETRY -1 -1 SAPCODE=666
CONV="
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.                     "

Invalid tag generated in result XML file, xslt mapping done using MAPFORCE

HI
My requirement is File to File using xslt mapping
I have done a very simple XSLT mapping, but through MAPFORCE tool
Here are the steps, I followed:
1. Supplied source xsd and xml file to MAPFORCE
2. Supplied target xsd file
3. mapped it as required
4. tested by supplying a sample xml file by clicking OUTPUT button, which displays perfect XML structure
5. Clicked XSLT button and copied and created a new file with extension .xsl file
6. Zipped the above xsl file
7. imported into IR imported archives folder
8. Selected the above xslt mapping in my Interface mapping.
9. Now tested my Interface Mapping by supplying sample some data for the source structure.
Now I got the error or warning "XML not well-formed" and got the successfull completion message window for my mapping when I proceed.
Now when I clicked xml source button for the target structure, It displays the invalid tag and starting with "#default"
So If I removed this particular tag at the first and last lines, it becomes a valid xml structure and able to see properly in my internet explorer
Here is the result I am getting:
<?xml version="1.0" encoding="UTF-8"?>
<#default:MT_Student_Result xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:xsltMappingScenarios C:/DOCUME~1/Satya/Desktop/MT_Student_Result.xsd">
<Data>
    <Name>Khan Raj</Name>
    <Marks>
      <Total_Marks>166</Total_Marks>
    </Marks>
</Data>
</#default:MT_Student_Result>
When I tested through MAPFORCE it generates absolutely valid XML structure when I clicked OUTPUT button on MAPFORCE, but not when I used the xslt mapping through my interface mapping.
What is the error I am making or any step missing?
Please help me!
Edited by: Shilpa Shetty on Oct 9, 2008 4:17 AM
Edited by: Shilpa Shetty on Oct 9, 2008 5:58 AM
Edited by: Chris Rock on Oct 9, 2008 6:06 AM

For some reason when I use MapForce tool to generate my xslt mapping source, it is generating the following statement in the xsl file.
     <xsl:namespace-alias stylesheet-prefix="n" result-prefix="#default"/>
So at the root element of XML file, it is replacing the character n with '#default' for some reason, I don;t know the purpose of this.
As you suggested, I changed the name space, still I experienced same problem.
It is now resolved after removing the above xsl statement from the xsl file before creating/uploading the relevant zip file into archives folder.
It works fine now. Thanks for the clue.

Send IDOC to flat file without mapping will it possible???

Hello everybody,
Iwould like to know, We have middleware tech is Webmethods. I want to send IDOC from SAP R/3 to flat file in Legacy system. how to do that? What willbe the structure of Flat file.

hi
Create a FILEPORT uing transaction WE20 and assign the fileport to your outbound message type in processing option, you can give the physical path in fileport and create the flat file format of IDOC.
hope this helps
regards
Aakash Banga

Executing flat file loading map with parameter

Hi
The requirement here is to design a map that will :
- read a parameterised file from a pre-defined directory and load the data into a pre-defined table.
I want to be able a pass the file name ( eg. customers_060309.dat ) to the executing process .
The problem I am having is in connection with figuring out how to parameterised physical file names ( eg. customers_010109.dat)
which are held under source file modules .
regards
azaman

Hi
There are a couple of posts here you will find useful for some of this;
http://blogs.oracle.com/warehousebuilder/2007/07/process_flow_execute_a_map_for_all_files_in_a_directory.html
http://blogs.oracle.com/warehousebuilder/2007/07/process_flow_execute_a_map_for.html
Cheers
David

Filter Idoc segment based on date in XSLT map

Hi,
In a Idoc to flat file XSLT mapping, I have a requirment to filter segment out of multiple segment occurance in HRMD_A idoc. Idoc has two date fields(actually string data, containing date in YYYYMMDD format) in the segment(end date and start date). I need to filter only one segment from multiple segments where current date falles within start and end dates (end date >= current date >= start date). Then map output fields from the filtered segment.
Its easy doing it in graphical mapping, but its difficult to use graphical mapping here as the message structure are enormous. I dont have much hands on in XSLT but think many of you have been through this kind of requirement using XSLT. So holding my hope high :). Please suggest a logic for this, will be highly appretiated.
Regards
Suman.

This functions will give you the current date:
fn:current-dateTime()     => Returns the current dateTime (with timezone)
fn:current-date()                 => Returns the current date (with timezone)
fn:current-time()                 => Returns the current time (with timezone)
To compare:
fn:compare(comp1,comp2)
fn:compare(comp1,comp2,collation)
=> Returns -1 if comp1 is less than comp2, 0 if comp1 is equal to comp2, or 1 if comp1 is greater than comp2 (according to the rules of the collation that is used)
Example: compare('ghi', 'ghi')
Result: 0
Also I suggest working with an IF condition like this:
<xsl:if test="price > 10">
        <tr>
          <td><xsl:value-of select="title"/></td>
          <td><xsl:value-of select="artist"/></td>
        </tr>
      </xsl:if>
Edited by: Kai Lerch-Baier on Apr 14, 2009 10:21 AM

How to write XSLT codeing in file to file using XSLT mapping?

Hi ,
Experts,
I am new to XSLT coding as iam doing File to File XSLT Mapping for i have created IR and ID part and i have wriiten XSLT codeing which is not working.
source structure:                     Target structure
Fname                                    Name = (Fname+Lname)
Lname
maths
science                                   Total_marks = (mathssciencesocial)
social
<?xml version='1.0' ?>
<xsl:transform version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:aash="http://xlst.file2file" xmlns:ns0="http://xlst.file2file">
<xsl:template match="/">                                               |
<aash:mt_student_result>                                      this is my Naming Space
<Data>
<Name>
<xsl:value-of select="concat(ns0:mt_student/data/FName,ns0:mt_student/data/LName)"/>
</Name>
<Marks>
<Total_Marks>
<xsl:value-of select="(ns0:mt_student/data/Marks/Maths)(ns0:MT_Student/Data/Marks/Science)(ns0:mt_student/data/Marks/Social)"/>
</Total_Marks>
</Marks>
</Data>
</aash:mt_student_result>
</xsl:template>
</xsl:transform>
while testing in Interface mapping the values are not comming into result side please verify the code and suggest me the correct one.
Thanks in advance
shabeer ahmed.

Hi Shabeer,
PFB, the corrected XSL.
try using it, it would work.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:transform version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:aash="http://xlst.file2file" xmlns:ns0="http://xlst.file2file">
<xsl:template match="/"> |
<aash:mt_student_result> this is my Naming Space
<Data>
<Name>
<xsl:variable name="vFName" select="ns0:mt_student_result/Data/FName"/>
<xsl:variable name="vLName" select="ns0:mt_student_result/Data/LName"/>
<xsl:value-of select="concat($vFName,$vLName)"/>
</Name>
<Marks>
<Total_Marks>
<xsl:variable name="vMaths" select="ns0:mt_student_result/Data/Marks/Maths"/>
<xsl:variable name="vScience" select="ns0:mt_student_result/Data/Marks/Science"/>
<xsl:value-of select="concat($vMaths,$vScience)"/>
</Total_Marks>
</Marks>
</Data>
</aash:mt_student_result>
</xsl:template>
</xsl:transform>
I have given input as,
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_student_result xmlns:ns0="http://xlst.file2file">
          <Data>
               <FName>FName</FName>
               <LName>LName</LName>
               <Marks>
               <Maths>M</Maths>
               <Science>S</Science>
               </Marks>
          </Data>
</ns0:mt_student_result>
Output was,
<?xml version='1.0' ?>
|
<aash:mt_student_result xmlns:sap="http://www.sap.com/sapxsl" xmlns:ns0="http://xlst.file2file" xmlns:aash="http://xlst.file2file"> this is my Naming Space
<Data><Name>FNameLName</Name><Marks><Total_Marks>MS</Total_Marks></Marks></Data></aash:mt_student_result>
It worked.Try it out.
Regards,
Swetha.

Create Mapping As a Flat File Source

Hi,
I'm new to OWB, my first project is to load data through flat file to oracle.
step i follow is,
=>Create Flat File Module
=>Create Location Directory
=>Create Flat File
=>Create External Table (Synch with my Flat File)
=>Create Mapping (Simple External Table mapped to table operator)
=>Create and bind table Operator
Mapping successfully deployed and but when i want to run it gives me following Error
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file IPDirectory.txt in FLAT_FILE_MOD_LOC_0 not found
When I directly mapped flat file to Table in mapping it gives another error
RPE-01013: SQL Loader reported error condition, number 4.
SQL*Loader-522: lfiopn failed for file (\\sfs\Analytics\Reference\SIMPLE_MAP.log)
I mention here that im working on my pc with OWB Client not on server and want to load data through flat file which is on my pc or on our sharing drive.
Please help me on this issue
Regards

Hi,
OWB generates SQL * Loader code for Flat File operator, if you try to change the configuration parameter to PL/SQL it results in error.
External tables would be a better choice as it reduces the processing time, disk space required and also makes it possible to use SQL and other complex transformations.

Java xslt mapping

hi,
could any one please forward me java and xslt mapping step by step screen shots.
I would be thankful to you ,if you do this.
with regards,
[email protected]

Java Mapping
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/alessandro.guarneri/blog/2007/03/25/xi-java-mapping-helper-dom
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
XSLT Mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15
/people/sriram.vasudevan3/blog/2005/11/21/effective-xsl-for-multimapping-getting-source-filenames-in-legacy-legacy-scenarios
Regards,
Prateek

File Adapter: Flat-file to XML

New to the Oracle ESB.
I am using the file adapter to read in a fixed-length flat file, have mapped it to an xsd and now I just want to dump the resulting xml into a directory. I don't see an obvious way to do this without converting it back to a flat file (by pointing the file writer back to a similar flat file xsd). Missing something obvious?
Thank you!

File Adapters content conversion does not supprot such a nested strucutre currently.
The only format supported is the one shown in ths link,
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Either write a module that will do this conversion or Change the datatye for the source to the format shown in help.sap.
Regards
Bhavesh

Convertion of flat file to XML using DOM

Hi!
I need help for convert a flat file to XML using DOM and by taking the validation of a specified DTD. Can any body help me in this regard.
Bye,
lat

first you have to decide how the flat file will map to xml. Will you use attributes or pcdata for your fields, or both? Will there be a hierarchy, or will it be mostly flat?
Once decided, you'd probably just use a BufferedReader to read the lines one at a time, and generate Dom nodes as appropriate, and stick them in the tree.

Generic and Flat file extraction

Hi experts
can any body send the Real time scenario for Generic and flat file extraction with examples.
Thanks and regrds,
satya

Hi,
Generic extraction is an extraction where you create a Generic DS and based upon this you would be extracting the data from R/3, which means you would have an source system to extract the generic data from the generic data source.
Flact file extraction is an extraction where you need not have to connect to source
system, in this case you source system would be PC, here you would be designing an infosource based up on the fields/columns of your flat file and mapping the corresponding the infoojects to it.. and update rules..
and you would be loading/extracting the data from the file as a source..
These two things are different in nature and usage..
Hope this helps..
assign points if useful..
cheers,
Pattan.

How to load Material from Flat File and convert to SAP Format

Hi
I am loading 0Material values from Flat File for mapping purpose. The format of Material in Flat File is "7704132". Within the system, i need to compare the value with 0Material values from the incoming data and update corresponding 0Material in records. for this purpose, I created dummy materials taking 0Material as template and trying to load data. I am getting invalid error- Version '7704132' is not valid RSDMD No194. Can anyone please let me know how to over come this issue. Should I include any routine in the data source or rules level. I am in BI 7.0.
Thanks.

Hi,
Use the FM CONVERSION_EXIT_ALPHA_INPUT to convert the value into Internal format .Use this FM in the Transformations (field mapping).
Search the forum with CONVERSION_EXIT_ALPHA_INPUT for more information on this.
Regards,
Anil Kumar Sharma .P

Flat File DataSource doesn't load properly.

Hi all,
we have a data file, which is tab delimited, saved as CSV and text versions. i have created a flat file datasource, mapped all fields.
I can load CSV version fine, but when use it on text version, it doesn't like it and can only return column one with the rest of the column blanked in the preview tab.
Setting:
In the "General" tab, everything is unchecked.
In Extraction tab, Adapter - "Load Text-Type File from Local Workstation"
                         Character settings - "Default setting"
                         Data format - "Separated with Separator"
                         Data separator - tab (00BB Hex)
                         Escape Sign - CR (00B6 Hex)
                         Number format - Direct entry
                                                 Thousand Separator - ","
                                                 Decimal point - "."
i have tried different setting, change number format to "User Master Records".
With the text version, the result in Preview can only display first column and Proposal preview can only shows one column. There is no error returned from the text version.
The CSV version can display all data and they are aligned as well.
what do i miss? is the text file not saved correctly? i can see all tabs and CR in the text version. it seems to be the tab is not detected properly or something.
Regards

Hi,
Have a look at the below link:
Loading Text Files(.TXT) into BW with HEX option

RFC to Flat file XSLT mapping

Similar Messages

Maybe you are looking for