My Blackberry curve 8520 wont turn on or charge

My blackberry curve 8520 doesnt turn on and when i try to charge it , there is just the red LED light and the screen shows up some picture which shows a red cross on top of a battery. I also tried to connect this to my computer but it doesnt respong and also try with another blackberry original battery it showing same . but when i put my battery to another blackberry phone that phone is turning on properly . please help asap.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • My BlackBerry Curve 8520 Wont Turn on With No LED

    My Blackberry Curve 8520 Wont turn on and there is no LED flashing, i have tried pretty much everything and nothing seems to be working, tried a new battery, tried using the USB and the mains charger, tried leaving to charge for 8 hours, is there anyhing i can do to fix it myself as i dont have themoney to replace the phone or pay for a repair
    PLEASE HELP ME
    Thank You 
    Nathan

    Hey hakmilton,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    I would suggest contacting your network service provider to look at possible repair and exchange options.  Since you tried a new battery and the LED won't come on, we can not even try reloading the device software.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Blackberry curve 8520 wont turn on or wont charge, please somebody help me!:(

    My phone was working fine yesterday until the keypad began to get stuck, so I removed the front off of my blackberry and I arranged the keys so they worked again, when I put my battery back in, the re-boot started, but once the blackberry screen loaded up, my phone shuts itself down, I haven't been able to use my phone all day today and yesterday,when I insert the battery the red LED light stays on for about 5-10 seconds and then it disappears, I left my phone on charge for 4 hours and it still wont turn on, but now even the LED light doesn't come on, I just have a black screen with no LED light whatsoever,  any suggestions?? I can't live without my phone for any longer! ox

    also when i insert the battery now, the blackberry screen doesn't come up, it just stays black

  • My Blackberry Curve 8520 screen turns ALL WHITE!! :'(

    Hello everyone. I need help here.
    I found out that my Curve 8520 screen turns all white. When I pulled the battery out, and put it back, things went ok; screen shows uploading but NEVER FINISH and it turns ALL WHITE again. I dd this a few times but still not working. 
    What is wrong to my blackberry? HELP!

    Hello grasyapagsinta
    Welcome to BlackBerry Support Community Forums
    If you think your Battery it OK then try Updating or reloading your device software to rule out any software issue.Have a look at  on how to perform a clean reload of device software :
     KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows.
    Additional Information :KB30280 : BlackBerry smartphone displays a blank white or black screen.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • My Blackberry Curve 9360 wont turn on.

    My phone was fully charged in my pocket, I hadn't looked at my phone for about an hour, I took it out my pocket and it was rebooting itself, which it never normally does. The phone didn't even get halfway and just turned off. After about 2 hours I tried again and it turned as it normally would but as the evening progressed this kept happening. In the end, I left the phone off and waited for the morning. 
    The next morning I go to charge the phone and connect it to the computer but it wont turn on at all. I have left it to charge for about 2 hours and still nothing. 
    I don't know what to do

    Hello Salway1,
    Welcome to the Community
    Please connect your handheld with pc using USB cable and check whether pc detect your handheld or not.
    Further, pull out battery and connect your device with charger without inserting battery & wait for 5 to 10 mins, a NO BATTERY sign will be shown on your handheld. One you find NO BATTERY sign, insert battery without un plugging charger & wait for 5 to 10 mins. Hope for luck..
    Thanks..!!

  • My Blackberry curve 8520 wont start up after rebooting.

    So i got a blackberry 2 days ago and thought i would get blackberry app world. So i downloaded it, it told me there was an error about java script or something like that. Then it say to finish downloading blackberry app world i have to reboot it. When i clicked reboot it went straight to a black screen! And it stayed lke this for the rest of the night, until morning. The red light keeps on flashing but when i try to turn it on, it wont. I tried taking the battery out but still didnt work i need HELP !!!!!!!!!!!'

    It show boot screen But it just stops till 75% of the bar I tried safe mode but it doesn't work please help me!

  • MY blackberry curve 8520 wont work ) :

    Hi. 
    I found an issue with my blackberry 8520 a day ago.
    I texted my friend, Before going to sleep The letter key " A " was working perfectly fine.
     I woke up the next morning, and i went to put my phone on charge because it was on 11% 
    When i came back, a friend had left me a message so i was going to reply him. I was going to reply  "ya" 
    and i was stuck with " Y " i couldn't type A at all. With this, my phone would auto lock itself, and i had to press any key till any box would prompt and allow me to continue. I couldn't answer any calls as well. So i did a restart and i couldn't switch back my phone! I then took off the battery and tried it again Nothing helped after that reboot. I have got no idea how i should fix this. 

    It sounds like what I have seen multiple times on a device with moisture damage.
    Even sitting on a bathroom counter during a hot steamy shower or bath, gym locker, sweaty face or pocket can cause keyboard and trackball problems UNTIL properly dried out.
    Does this sound likely?
    It really is more common than you think.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    4. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    *Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    *On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    *On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry curve 8520 trouble turning on

    Okay so a few weeks ago my blackberry stopped working. i was on it one day on bbm and it died so when i got home i charged it up then went to turn it on but after 2 seconds of the rebooting screen a battery with a red cross appeared giving me the indication my battery was low i let the rebooting process continue but at about three quaters of the way through it froze, so i pulled the battery out after leaving it too frease for over an hour and carried on doing that. it didnt work a few weeks later i tried it again it worked but then today it ran out of charge and when i tried to turn it on it does the same thing even know ii have 100% charge as my other blackberry (which can only use facebook for some reason) said i had 100% in the status option screen please reply asap as i need my blackberry fixing soon!

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My blackberry curve 8520 wont connect boot room.

    I recently wiped my device then I tried to reload the OS I could not load because it got stuck on connecting to boot rom. When ever it tries to connect boot rom my device restarts and say USB not recognized.

    Hi there,
    Given the number of things you've done, I suggest a complete start over...
    I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    Some have reported that there are more registry keys to remove than are discussed in that KB
    Others have reported the use of a registry cleansing tool to also be helpful
    3) Get a fresh download of the RIM DTM software:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry curve 8520 wont retrieve mms or connect to wifi

    hi was wondering if anyone could help me, i have been sent an mms but i cannot retrieve it and im also having trouble with the wifi, i have a home router and i have it up via the manual instructions, it will show the wifi name on the top of the screen but when i try co connetect to the net it says unable to connect, if anyone could advise on both issues i would be greatful thankyou 

    Please contact your Carrier for issues relating to MMS as they may have restrictions for sending MMS. They can also walk you through the process of correcting the settings of your phone if you need to.
    Goodluck
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • My blackberry curve 8520 wont upgrade. It keeps saying

    An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problelm persists. 
    My internet connection is fine, both of my internet connections (phone, laptop)
    What can I do to fix this?

    Hi there,
    Here is a different set of instructions that can help you upgrade your phone:
    http://supportforums.blackberry.com/t5/Device-soft​ware-for-BlackBerry/How-To-Reload-Your-Operating-S​...
    Note that because you're just upgrading your phone, you can skip step 4 as that's not required.
    That should help!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • HELP!!!!! My Blackberry curve will not turn on or charge??......

    My phone has been fine until last night, I was out & the battery died. As soon as I got home I put it on charge & got in bed...it briefly turned on this morning but ever since I cant get it to charge or turn on. The red light in the top right corner comes on for 30 seconds when I plug my charger in then the screen stays black but a battery symbol with a yellow lightening bolt through it stays displayed on the screen but nothing is happening? Please help I need data from my device ......Thankyou xxxxxxxxxxx

    most likely your battery died for real and would suggest you to bring it for a check. It's nothing to worry, battery failure happens and you won't lose you datas.
    John.P
    Blog: http://www.maurisource.com/blog

  • My Blackberry Curve 8520 Froze and now wont turn on!!

    Hey, please can anyone help!!
    My blackberry curve 8520 got wet 2 days ago and was fine for ages...
    Then it completly froze so i took the battery out and now it wont turn on!!
    There is no red light, no white screen, nothing
    I have taken the batt out, left for a min put it back in but nothing. I tried taking it out for longer but still nothing.
    I have left it on charge for ages but that dodnt work either.
    Nothing happens, it just wont turn on.
    Is it completly ruined or is there a solution??
    It was working fine for hours after it got wet so little bit confused as to whether that caused damage or not.
    Apologies if i have left anything out

    I've often seen it recfommend to place in a bag of rice so that the moisture gets soaked up.
    Check out this link
    http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Blackberry Curve 8520 won't turn on or charge

    My blackberry curve 8520 will not turn on,there was a red light on for a minute! Took out my sim card,memory card & battery and tried to charge it then. It came up for literally one second a drained battery sign. Really don't want to send it away, any help would be great Thanks!

    Leave the device to charge 2-3 hours, and then, still connected to the charging cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My Blackberry Curve 8520 turns itself off, lock and get a white screen.

    Whenever I'm making a connection, it starts to give strange noises during the call and ends up shutting down completely. When I try to turn it on again, it starts loading the OS, when the progress bar loads halfway, he gets the white screen and locks up completely, making it impossible to use again. The Blackberry only back to work only when connected to the battery charger. I hope someone can help me! Thanks in advance. The text can be somewhat meaningless, because I'm from Brazil and translated using Google Translator.

    Hi denisssilva94,
    Welcome to the Support Community!
    I would suggest first testing your BlackBerry® Curve™ 8520 smartphone with another battery to rule out any issue with the battery itself.
    If you have the same issues when using another battery, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.
    For further instructions, please see the following KB articles.
    For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
    For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
    Please test to make sure the issue has been resolved before restoring any data from your backup file.
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • I'd sure like to know what the problem is with HP preventing me from logging-in to Passport/Forums

    This is a problem I've been chasing, looking for a solution, since I registered my computer in January 2013. In spite of registering under about 5-6 different user IDs and passwords, I'm never able to get logged-in. I have disabled all security and a

  • Data Conversion Logic

    I am now trying to implement a data conversion logic(such as UOM field), I want to load all the data conversion rules in the cache from file and keep them in the cache. So when mapping starts it just picks up the data conversion rules from the cache.

  • Standby db doesn't apply logs

    hi all, my problem is that none archive logs are actually applied to the standby database Background Managed Standby Recovery process started Starting datafile 1 recovery in thread 1 sequence 15536 Datafile 1: '/oracle/ean1/database/data/EAN1_SYSTEM0

  • File:reference help

    how do i get the dialog box to open only once and have multiple files downloading. I dont want to use zip or any compression folder types. This is for a standalone player

  • Solution Manager 7.1 -SOLMAN_WORKCENTER is not working

    Dear All, Newly installed Solution Manager 7.1 System (ABAP+JAVA). Created new client and new sap id solman_admin and assigned all SAP_SMWORK_BASIC* role to user id. Activated the all relevant services by tcode SICF and set the parameter icm/host_nam