My calling plan and line rental are not shown in M...

When I look in My BT at 'My Services' under Phone, it shows Unlimited Weekend Plan - correct.
There is no mention of the Anytime Calls package that I am actually paying extra for, although this does show up on my previous bills. There is also no mention of the Line Rental Saver package that has also been paid for.
WHY?
Dave

The two telephone companies I use (no names) are probably equally awful for their not giving an accurate picture of what they do before putting a corporate hand straight into my bank account. The obvious inference is that they are dishonest which would, I might think, impact on their image and sales. What I have learnt to do is to complain immediately when there is an unexpected charge. People who operate by stealth usually withdraw the hand pretty smartly when they are challenged.
Good luck,
Art

Similar Messages

My movies and movie rentals are not syncing with my ipad? any ideas on why?

my tv shos, movies and movie rentals are not showing up on my iPad but do show up in my iTunes library. Any ideas or reasons why they aren't transferring to my iPad when I sync it?

At the moment, I only have a couple of movies in my "Videos" folder. About a month ago I did have 2 rental movies and they were in a subfolder which I think might have bee called rentals. After I watched them and aftet the 24 hour viewing period was up, they went bye-bye.
As to why you don't see any rentals, I don't think iTunes allows rental movies to be synced to another device. I know they don't allow transfer from ATV to an iTunes folder on a computer.
Did you actually rent these missing videos directly to your iPad? If so, they should be there. That's how I got the 2 rental movies that I had in my Videos folder.

Input and output varaiables are not shown

Hi,
I am using BICS connectivity to connect to a BeX query from Xcelsius. I am able to logon to SAP use datamanager conn and also able to select a query. But after that the query input and output variables are not shown. Instead all those fields are greyed out. I am not sure whether am missing any configuration. Please let me know if anyone have workaround for this issue.
Thanks,
Sivakami - SEMC SAP team

That is interesting. The first (AES) is producing a 128-bit key, the second (aes) is producing a 256-bit key.
Producing a 256-bit key should not be possibe without the JCE/JCA Unlimted strength policy files installed, I have those files, installed, do you?
If someone who doesn;t have ththe policy files installed tried it, what do they get?
I would suspect that the case-sensitive nature of the underlying JVM is causing it to choose a different Crypto Provider when you use aes than when you use AES. The JVM that ColdFusion ships with (and the standard JVM) have severa crypto providers to choose from, plus ColdFusion Enterprise and Developer addition also include the BSafe Crypto-J provider), I think there are 10-11 total.
I would log a bug for this.
FYI, you can control this by using the optional keylength argument in generateSecretKey()
These two statements will produde keys with the same length.
#arrayLen(binarydecode(generateSecretKey("AES", 128),"base64") )#
#arrayLen(binarydecode(generateSecretKey("aes", 128),"base64") )#

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

COMBO BOXES AND SOME PAGES ARE NOT SHOWN CORRECTLY IN SOME WEBSITES LIKE SBICAPSEC AND MAXNEWYORK LIFE. BUT NO PROBLEM USING WITH IEXPLORER

I am not able to login to maxnewyork life insurance site while using firefox. I am using firefox 3.6.10 now. Combo boxes are not shown in the some trading websites. I uses noscript2.0.3.3, javaconsol6.0.21, javascript option 1.2.6 and WOT20100908. It creates feeling of inferiority in using Firefox due to these problems.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Under "CLIP" all featured options are grade out. Please Help!!! Also the blade and blade all are not shown in the tool bar...

Hello People. I just reinstalled my sound track pro which took me forever, dah . And now I'm having difficulties with using some options that are listed under the "Clip" they simply all grade out. Also some tools such as blade and blade all are not listed in the tool panel. Please help me people. Thank you all.

People, never mind about the Blade Tool I found answer on the community board. Thank you. But still looking for grade out issue.

Open Item and Line Items are not matching

Hi Gurus,
I ran the EFT for vendor #1600109 for payment on 10/18/07. If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403).
When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403).
User wants the open item report should tally the line item display.
I will assign good points.
Thanks for your help
Prashanth

Hi Gurus,
EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
Clearning date is 18th
Posting Date is 15th.
Thanks
Prashanth

Line Details are not shown in an order

I am working on oracle EBS india local order management and we have recently
applied a Patch
*11i_ATG_PF_H_delta_7 (RUP 7)*
*6i Developer*
Jre plugin
We have a customization that we insert orders from our custom table to our Order Interface.
It was working fine from last 1 years.
Suddenly after applying the above patch,we noticed that Pricing information (Price list name) didn't get populated in some Orders.
And orders remained in Entered State.
The orders are not too specific,it happens with any of the customer and any of the order Type.
Yes, the Work around for this is we can manually insert the Price list name in Orders lines and then can Booked the order
But to remove this manually intervention,i need your help.
If Anybody ever had faced such problem like this,Please share your views.
Edited by: Anshul Sharma on Feb 9, 2012 10:31 PM

any help ??
Samier Danish Rachel Tang Mohamed Abd elrazek Mohamed PRASOON AK Rob Burbank LAXMIKANTH Patnaik Anders Jensen
Thanks

Music and Video List are not shown in iTunes

My iTunes will not show music or video (or any media) lists or displays. I had repartitioned my Macbook and ended up doing an fresh OSX install. I used Migration Assistant to clone all my apps, including iTunes, from my MacMini. Everything works except, when I bring up iTunes on the Macbook, I have no lists for Music, Movies, TV Shows, etc.
Despite that, all the music seems to be there as I can get it to advance to the next song, etc. Movies and TV Shows are another problem. I can see the media in the iTunes files. But I can't play them directly in iTunes.
If I bring up Front Row, I can see the titles for the Videos and TV Shows, but if I select one I get a "bad format" type error message.
I've tried completely removing and reinstalling iTunes on the Macbook (even removing the related .kext and .plist files). I've tried doing a backup if the iTunes library on the MacMini and a restore into a clean iTunes install on the MacBook, all with no change.
Any ideas?

Interesting... my iTunes shows music and TV shows, BUT it doesn't show those tabs in the iTunes Store... I hope someone can answer these! I can't download music!

Missing part list is incomplete while creating Production Order and 2 components are not shown in the list.

Hi Team,
We are facing issue for availability check. During creation of Production order, the missing part list is not complete and it should show componenet A in the Missing part list. Below is the details:
Production Order quantity: 100 kg
Componenet A required quantity: 100 kg
MMBE Unrestricted qty: 1000 kg
MMBE Reserved Quantity: 2000 kg
So as per above figures component A should come as missing part during availability check. But it is not coming as missing part. Please check and give your inputs.

Hello
The results of availability check should NEVER be compared with MMBE. As already mentioned, transaction CO09 is more appropriate.
Also, this issue has been already discussed on hundreds of threads in the past. See some examples below:
Problem with missing parts list during production order creation
issue in committing material for production order
Material Availibility check in Production orders
availability check
order is not released
As it is stated on the The SCN Rules of Engagement you should do some research before opening a thread. Therefore, please use the search tool or even google to search for similar problems before opening a thread.
BR
Caetano

Helpful and Correct icons are not shown (anymore) on certain threads only

I think there is a bug somewhere as i.e. at the top of this thread Re: Need Help in writing the Business Rule
I can read "This question is answered. Helpful answers available: 5. Correct answers available: 1. "
But not a single of the following answers shows the helpful (yellow star) or correct (green star) icon.
Is it only me or do others experience similar situations?

Thanks. I think Justin's "non-intuitive" is worth a "correct".
BluShadow is "correct" too.
When I click on correct OR helpful next to this post (no matter which of them) I get shown a radio button where I can choose only one of this two: "Yes, my question has been answered." or "No, my question has not been answered yet."
I am not very much interested in the points but want to find "good answers" quicker when reading through different posts. And for this reason the icons are extremely helpful.
I would suggest every answered thread must get at least one "green" icon in order to be closed. If there is no correct answer I would i.e. have to post my own solution to it and this would get the "green" icon which could be altered i.e. to a blue one or so...
Thanks everyone anyway. I am now going to try to give some points, as I now above this text do choose "Yes, my question has been answered." :-) Hopefully I will get a change to give some points after this or I will know that "answered" will mean "closed" ;-)

After reopening dreamweaver files, the table and its contents are not shown in design view

I got a problem with deisgn view which has stucked me for the whole week. I've designed a webpage with dreamweaver CS4. After reopening this webpage, I got problem to see the tables and images inserted in dreamweaver (the sliced images from fireworks works well). Somehow this problem only existed in design view, but NOT is browswer view/ live view. I thought it is the setting problem, but I tried to reopen the webpage I designed earlier... got no problem in either design or live view. I also tried starting over another new file, same problem existed (tables/images do not show in design view) I am really confused. Any thoughts?
I've already done my research everywhere, but cannot find solution.

Thank you so much... it works...
I should come here earlier... wasted lots of time !!

Placed PNG images which are made in 3ds max are not shown correctly in Ilustrator

Hello,
Why placed PNG images (renders) which are made in 3ds max (and then photoshoped) are not shown correctly in Ilustrator. Images appear very noise so you can't see almost a thing. the same pictures (renders) made in Revit appear ok.
Is there a solution to solve this issue?
Thanks.

You would have to provide screenshots of how it looks in PS, including the channels visible. MAX may have embedded extra channels that throw off AI. And of course check whether your PNG is actually 8bit, not 16bit.
Mylenium

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

My calling plan and line rental are not shown in M...

Similar Messages

Maybe you are looking for