My celluar number is not appeared in " received At" in iMessage setting

My celluar number is not appeared in " received At" in iMessage setting although I correctly add this number in my App ID account.
I also try to switch off and on iMessage as the common recommendation but still didnt appeared , I switch off the whole device but still I can't.

You use your Apple ID email address for the "received at" (or another email address if you have another one) for messaging on the iPad. You do not use the phone number for the device.

Similar Messages

Online phone number does not appear on receiver c...

I have a skype number and when I call a cell phone, a 000 000 or funny number appear on the cell phone of the receiver. How to set it up so the receiver will see the skype phone number
Thank you

aldee wrote:
I have a skype number and when I call a cell phone, a 000 000 or funny number appear on the cell phone of the receiver. How to set it up so the receiver will see the skype phone number
Thank you
If your Online Number is from one of the following countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), you can use it as your "Caller ID" number when calling telephones from your Skype account. Log into your account using the "Account" link at the top of this page, and you will see (among other items) your current Caller ID Settings. Click on the link to change that, and go from there.
If your Online Number is not from one of those countries, you won't be able to use it this way. For the other countries, it can be either local/national regulations, limitations from Skype's partner that provides the Online Number service in a particular country, or some combination of those two possibilities. You can use a mobile number that goes through a two-step process where Skype sends SMS messages to the phone (this requires a small amount of Skype Credit, in order to send those SMS messages). Mobile numbers from Japan and Mexico can't be used this way.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Online number does not appear as caller ID for out...

I have a Skype Premium account and an Online Number based in Stockholm, Sweden.
I have verified the Caller ID for my account is set for the Online Number starting with +468.
When I call my mobile phone (Swedish mobile operator), the ID appears as "Unknown".
When I call the Online Number from my mobile phone, the calling number is shown correctly.
What could be wrong?

jiang924 wrote:
I have an online number for my skype account. When I call others from skype, the online number does not appear on the receiving party's phone, instead the receiving party would see 0000123456
Note that I can receive landland originated calls to the skype account's online number.
Log into your Skype account here on the Skype web site, using the "Account" link at the top of this page. Once you log in, you will see Caller ID settings. If your number is from one of the countries whose numbers can be used as Caller ID (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), you should be able to select it and save that for your Caller ID setting. If your number is from some other country, it can't be used as Caller ID when calling phones from Skype - and you would need to use a mobile number (except those from Japan or Mexico) that has gone through the two-step SMS verification process from Skype.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Order Number is not appearing in Asset PR

Hi,
At the time of creation of Asset PR, the order number is not appearing. I had already assigned the order number in "origin" tab in Asset Master. Please find below details:
1) Creation of Asset with AS01
2) Creation of Order with KO01
3) Assign the order in Asset Master "Origin" tab. The field is "Investment Measure".
4) Creating a PR with Account Assignment "A". But the time I provide asset number, the Order field is coming as "blank".
I am making Direct Capitalisation through Internal Order with asset under Construction.
Please suggest.
$atya

Hi
please check the settings from the note 684659.
Best Regards,
blaz

While executing TCode F13 and F13E, purchase order number is not appearing.how it should be displayed into tcode f.13, please any one help me

While executing TCode F13 and F13E, purchase order number is not appearing.how it should be displayed into tcode f.13, what are the requirements need to display into tcode f.13, please any one help me, i am facing this problem in production server

Hi Nattu,
Please check it will show the PO no under Purchasing doc field
Check which layout you are applied.
its should be
SAP&F124
Without Specification of Crcy
Regd,
Khan.

My number does not appear on the opposite side.

Hello,
I bought a skype number today. But, my number does not appear on the opposite side. Why is this happening? How do I cancel.
Kind Regards.

i've had my number for some time and ever since this new update, my number is not displayed on the other end or it comes up as 661 or 611 somwething like that. also, people cannot call me on that number for some reason. an answer to this would be nice

The check number does not appear on the top right hand corner of check

Hi
Friends,
I posted an Invoice (FB60) and did payment through F110, But cheque no. is not displayed, when i have given print preview/print. or T.code SP01.
My configuration is correct in FBZP say....
1. Payment methods in company code ZLF_PRENUM_CHEC1
2. Payment method in country ZF110_US_AVIS
(Q) How to get the cheque no. When I do invoice and payment?
(Q) The check number does not appear on the top right hand corner of check as it should in the print check layout and does not appear in the check number box?
Anil

Go to this address: http://mycroft.mozdev.org/search-engines.html?country=AU
Item 24 lists 3 installable major search engines for Australia.
You can also restrict your search in Google by including ''country:au'' or ''location:au'' or ''city:perth'' (for example) in your search terms. Example: ''city:sydney plumbers'' in the Google search box will list plumbers in cities named sydney.

TS2755 On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. IOnly by going through contacts, can I message the correct number. The old number does not appear t

On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. Only by going through contacts, can I message the correct number. The old number does not appear there, so I am unsure where "messages" is picking up the old number, it doesn't appear that "messages" is synching with "contacts". Any ideas how to fix this?

On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. Only by going through contacts, can I message the correct number. The old number does not appear there, so I am unsure where "messages" is picking up the old number, it doesn't appear that "messages" is synching with "contacts". Any ideas how to fix this?

Transport Req number is not appearing

Hi ABAPers,
i implemented Zreport program in client 300. it has tr.req.number. when i want to release this, this tr.req number is not appearing in se09/se10. what could be the reason. please explain me.
landscape is : 100:Dev client. 200:Client 300 config only
Thanks in advance.
hari

Transport Request within same Server Different Clients
I have 3 clients under one SID (dev 130,140,150).
And we have more than 400+ transport requests in client 130. How can we transport these requests to other clients of 140 & 150. If I want to use tcode SCC1, that can be done only one tran. request at one time.
Do I need to write a script within unix?
SAP 4.6C
Oracle 9.2
AIX 5.2
Mohd Zainizam
Try STMS.
Click on the "import overview"
Double click on your target system
Click "refresh"
Click on "import all request" or ctrl+F9
Specify the target client
Execute the transport
Done...
Ronald Ramos
But this will import all request.....thousands of them...
Mohd Zainizam
You can use Extended Transport Control.
Extended Transport Control is another way to set up the Transport Route so that the route is system and CLIENT specific.
In other words, when you release a change request in DEV Client 0XX it will not only automatically be added to the Import Queue for QAS but also 0X1, 0X2, of DEV.
To set this up requires the steps below:
1) Open the file TP_DOMAIN_DEV.PFL (located on your transport domain controller such as the DEV box. The file will be in usrsaptrans/bin)
Edit with notepad for each parameter on each system:
DEV/CTC = 0
Change to =1
2) Next you need to create Target Group before creating the transport route.
Create a Target Group:
Access the initial screen of the graphical or the hierarchical editor in change mode. STMS > Overview > Transport Routes (the default editor will appear, either Hierarchical or Graphical, to change the default editor : STMS > Extras > Settings > Transport Routes. You can also switch to one or the other from Goto > Graphical Editor.)
> Configuration > Display Change > (or change icon or F5)
Edit > Transport Target Groups > Create
In the dialog box, Create Target Group:
Enter a name for the target group /GR_QA/ (The name must begin and end with a forward slash /)
...and a description Targets for Consolidation route
Choose "Insert line"
Enter the required target system/client combinations
Use a separate line for each client.
Example:
Target System
Target Client
Client Name
DEV
0X1
Sandbox
DEV
0X2
Testing
QAS
0XX
Quality Assurance System
The idea is that we want to include the clients that will get an addition to their import queue when we release a change request from DEV.
Choose Transfer
Now you have to change the transport route to include the Target Group you created.
STMS > Overview > Transport Routes > F5 (change mode) Edit > Transport Routes > Delete
Now create a Transport Route with Extented Transport Control:
STMS > Overview > Transport Routes > F5 (change mode) Edit > Transport Routes > Create > Extended Transport Control icon at lower left of dialog box. > Consolidation route, enter integration system and transport layer. In Target system/client enter the SID of either an R/3 System and a client or an existing Target Group.
Each System must be specified by System and Client. The Target Group can be used for the consolidation system.
Distribute and activate the changes as usual by choosing Configuration > Distribute and activate
NOTE: After you set up Extended Transport Control there might be requests in an import queue that will show a red status in the CTL column. This is because these change requests need a client specified before they can be imported. These are old requests that were already in the queue.
From Import Queue Screen Mark the change request
Choose Request > Target Client > Set
Enter the Target Client ID and choose Enter.
To change a target client before starting an import:
Import Queue Screen > mark Change request > target client > change > enter target client id and choose enter.
Hope this helps.
Good luck!

Internal Item Number " Items not appearing in Sales order Line form

Hi,
We are in 11.5.7 vis. While choosing an item in the Sales order form, only the line items with type 'chargemaster' and 'vendor' appear. The items with type 'Internal item number' doesn't appear anymore. The item validation organization is set to the Master Inventory organization.(V1).
When i checked the pricelist creation screen, with product attribute - item number, the product value field is empty and greyed out for all the items.
I compiled the system Items flexfield. I tried adding a new product to the pricelist with product attribute-item number,product value - A000 .All the items (with their internal item numbers) appear while choosing the product, but the product description doesn't default and the field remains empty and greyed out.
After saving the item in the price list and if i query for this particular item, the product description appears but the product value now becomes empty and greyed out.
Any explanation as to to why this is behaving so and to rectify the same?
Regards,
Nithya

Hi,
Check item category determination (VOV4) whether the item category is determine with the combination of material item
category group,untill the material being read by the system it will not give the line item no,and also check at VOV8 for your doc
type Item no.increment Ex: 10, is maintained or not ,if not maintain and try.
Regards
Ram

Contact picture does not appear when receiving incoming call

I have attached pictures on my iPhone contacts but when i receive an incoming call the picture does not appear. Any ideas how to resolve.

I am expriencing the same issue with my iPhone 4S, were you able to resolve the problem?

IMEI number does not appear

Hello
I have a problem iPhone 5
Update iPhone to 6.1.4
After the update showed a black screen
And remained a black screen and the device did not work
I did restore the itune succeeded way
But I can not activate the
iPhoneThe IMEI number does not appear

No, unfortunately, did not buy it from these companies
I've purchased from the store
But the strange thing about the problem that the machine was working well and did not show the problem, but the update to 6.1.4

Epson USB or USB not appearing as an option in Printer Set Up Utility

I am trying to get my Epson Stylus RX510 (RX500 outside Australia) multi function printer to work with my MacBook Pro. I have the latest, correct Intel drivers installed (3.0aEs and scanner software CSPC3_PCF_OSX_27w41). When I connect via USB and select "Add" in Printer Setup Utility, the printer shows up but the drivers do not appear.
The "Auto" option is greyed out.
There is no option for USB or Epson USB available. I think this is the key but...
Having spent days trying to resolve this, speaking to Epson and Apple techs, I still have no luck. This is what I have done so far:
- Unplugged the printer from the MacBook
- Reset Print Setup Utility
- repaired permissions
- in Command "I" I have selected "Open using Rosetta"
- uninstalled all the old Epson drivers
- reinstalled the new drivers
- run Disk Utilty (no problems found)
- run printer setup repair
- reinstalled Mac OS X without the old epson drivers and gimp drivers
- reinstalled the new drivers again - no luck.
- went to the Epson USA site and downloaded the drivers for the RX500 instead of the RX510 - still no luck.
- cried!!!! (kidding - but almost made everyone around me cry).
Incidentally, printer is working perfectly when connected to my G4 with the old drivers, so it isn't a printer problem or dodgy USB cable.
Epson tech says there is nothing wrong with the drivers and I have done everthing correctly.
Apple tech says I have done everything they would tell me to do and to post it in discussions. Here's hoping one of you gurus can help me please.

Thanks - I did already try PSR but on your advice just had another go and below is the log, wherein I suspect the answer lay (for any of you mac guru's anyway). Do I need to find and install all the missing files to get my Epson printer working using the Epson drivers (ie. don't want to use CUPS)? If so can I load them from the Mac OS X install discs without having to reinstall Mac OS X all over again?
Printer Setup Repair Log:
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin is missing!
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents is missing!
The file /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/Info.plist is missing!
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/MacOS is missing!
The file /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/MacOS/CUPS is missing!
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/Resources is missing!
The file /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/CUPS.plugin/Contents/version.plist is missing!
The directory /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/USB.plugin/Contents/Resources is missing!
The file /Applications/Utilities/Printer Setup Utility.app/Contents/PlugIns/USB.plugin/Contents/version.plist is missing!
Recreating symbolic links...
Done.
Verification complete.
1924 files examined. No problems were found.
9 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
Thanks again! Julie

IW8W - Serial number list not appearing

Hi,
We are using refurbishment scenario with serialised material.
In iw8w the system asks me to enter the serial number but there is no option for entering it.
Then we tried the following,
While creating the refurbishment order, we entered the serial number by clicking on button "Object" and also noted down the reservation number.
Then when we do MB11, we enter the order number and the reservation number. But the system does not show any serial number. (If we manually enter the serial number which we entered in refurbishment order, the system just gives a warning message saying the stock data is not suitable for movement) Then in IW8W, i can see the serial number list.
My question is, why the system is not showing me the serial number in MB11?
is any config setting missing.
I am using the material with valuation type C3 (Bad) and status as ESTO(in w/h).
Please suggest.

Dear Vijay,
To make appear your list of serial no while doing goods recipt at IW8W
There is a small configuration in the Plant Maintenance i.e. Functions and setting for order type-> Goods Movement for Order Type.
Now Pleae check the check boxes for planned goods issue, Un planned goods issue, goods receipt for refurbishment . then it will work.

Serial number does not appear in report file name

HI,
I'm using TS4.1. I'm getting a report with the serial number. However, the filename of the report does not include that serial number.
example:
UDT_Report[NO_UUT_SERIAL_NUM3][2 35 46 PM][9 15 2009] (see attached file)
Any idea what happend or where to look
thanks
Rafi
Attachments:
UDT_Report[NO_UUT_SERIAL_NUM4][2 40 58 PM][9 15 2009].txt ‏10 KB

Hi Rafi,
How are your report options set up?
Charlie Rodway
Test Design Engineer
Rolls-Royce Controls and Data Services Ltd

My celluar number is not appeared in " received At" in iMessage setting

Similar Messages

Maybe you are looking for