My computer, OS Vista 32 bit, clock won't get updated with internet sync system

by the time I use, internet time setting --> update now
I get below errot;
An error occurred while windows was was synchronizing with time.windows.com. I have tried all the options and still get the error.
This has made my computer time wrong.
How can I fix this?

Hi,
Do you need further assistances on this issue by now?
If yes, please feel free to let us know.
Have a nice day!
Amy

Similar Messages

Itunes not downloading on my computer (Windows Vista 64-bit)

I had to uninstall my itunes and download the new version on my computer (Windows Vista 64-bit) and when I click on the "download itunes now" button, it immediately says "Thankyou for downloading itunes" but it's not downloaded.Any suggestions?

See the further information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links.
tt2

I cannot sync to itunes on my computer (Windows Vista 32 bit) with my mini conected.

I cannot sync to itunes on my computer (Windows Vista 32 bit) with my mini connected. What should I do?
My Mini will not boot up. I tried holding both buttons down. I got a "connect to itunes" message. I connected. and nothing happens.

Hello there Chess-ster,
If I understand correctly your iPad mini is not being recognized in iTunes on your Windows Vista PC. I would recommend you use the troubleshooting in the following article:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Start with these steps and work your way down as needed:
Restart
Turn off your computer and your iOS device, then turn them on again.
Update your computer
Check to make sure that you've installed all required updates for your computer.
Update iTunes
Check that you have the latest version of iTunes installed on your computer.
Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
Thank you for using Apple Support Communities.
Cheers,
Sterling

When I reinstalled iTunes, it wiped out my Foxfire browser history. Is there any way to restore my previous session? My computer is Vista 64 bit.

When I reinstalled iTunes, it wiped out my Foxfire browser history. Is there any way to restore my previous session? My computer is Vista 64 bit.

You are using an old Firefox 3.0.19 version that is no longer supported.<br />
Any particular reason why you haven't updated yet?<br />
See [[Upgrading to Firefox 3.6]]
You may also need to look at these:
* http://kb.mozillazine.org/Lost_bookmarks
* http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r32
# Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

Networked HP K5400 printing everything backwards, server computer Windows Vista 32-bit Ultimate

Our networked HP K5400 printer has just started printing everything backwards, (word, notepad, Adobe reader, web). The server computer is a Windows Vista 32-bit Ultimate.
Configuration has been working fine since we got the printer over a year ago. I do not believe there have been any recent updates or new software installed since it's been printing backwards. A new router (Cisco Linksys E4200) was added but pretty sure it was printing fine even after router added a month ago. I have checked the properties and made sure Mirror Image IS turned off.
Any other suggestions?
Thanks!
Carol

Okay, couldn't find any HP software on the server computer.
I DID however recheck all the settings and still only able to find MIRROR IMAGE set to OFF everywhere I looked..
UNTIL I clicked around and found one setting a little buried and it was set to ON.. Did a test print on something that was printing backwards and it printed correctly.
Thanks for your suggestion. When the printer gets moved to the router I'll have to recheck all the settings but until then I hope this fixes the problems.
Carol
Oh here is what I had to do.. The first part are the same directions that I found on here and other places but didn't work for me, second part is what fixed my problem.
START>CONTROL PANEL>HARDWARE AND SOUND>PRINTER
Rt. mouse CLICK on selected printer
CLICK PROPERTIES
CLICK button on bottom of GENERAL tab PRINT PREFERENCES
select OFF for MIRROR IMAGES
if that is alread set to OFF (which mine was already set to OFF)
CLICK on ADVANCED tab
CLICK on PRINTING DEFAULTS button at bottom
select OFF for MIRROR IMAGES (which mine was set to ON)
CLICK OK/APPLY to exit
test print

HT1923 I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit. I keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinst

I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit yet keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinstall as recommended and instructed step-by-step on Apple's website. Any ideas how I can get around this, anybody?

I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit yet keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinstall as recommended and instructed step-by-step on Apple's website. Any ideas how I can get around this, anybody?

Firefox 15.0.1 not working on Vista 32-bit nor Windows XP after update. Server Not Found error.

I recently updated to Firefox 15.0.1 on 2 separate PCs. One PC is Windows Vista 32-bit with Comodo Internet Security. Other PC is Windows XP with Avast. Previous version of Firefox was operating fine on both before update. I have exhausted all suggestions from this site to get the new update to work but it does not.
On Vista PC, Chrome and IceDragon also have the same server error but IE works. And I've followed all the suggestions to allow access. I've uninstalled and reinstalled. Changed to no proxy. Tried the network.dns... changes and nothing.
Has Microsoft banned every other browser from operating with their systems via a recent update? I'm wondering if this is not the case since everything was fine prior to this.
I also have a Mac that uses Firefox 15.0.1 just fine since the update so this is exclusively a PC issue.
Windows Firewall and Defender are deactivated. Thanks for any insight you can share.

Does deactivating Comodo Internet Security or the other security software help anything? It might be that your security software is blocking Firefox from accessing the internet.
--Tobbi

Windows 8.1 Won't get updates in audit mode.

I just installed Windows 8.1 in a Hyper-V virtual machine. The release version that was distributed through msdn not the preview. I enter audit mode as soon as I can, so there have been no changes or customization applied to the install prior to entering
audit mode. I start up windows update to search for new updates. The status is displayed as "Checking for updates..." "Most recent check for updates: Never." "Updates were installed: Never." The status never changes from "Checking
for updates...". I have even left it running over night and it still says "Checking for updates...". There is never any error message or failure. Network connectivity is functional. I have attempted an install on a physical machine as well with
the same result. If instead of entering audit mode a proceed through setting up windows and a user account, updates will work just fine. There should be an update to defender as well as an update to ie11.
I considered the possibility of a corrupt download so I compared the sha-1 hash to what is listed on the msdn download page and it does match.

Quoted from http://social.technet.microsoft.com/Forums/en-US/afc7f693-f742-402f-b513-063989b79c2f/windows-81-enterprise-windows-updates?forum=w8itproinstall.
Emphasis added.
Thank You for sharing the logs. I was able to reproduce the issue in my virtual environment. To understand more about this behavior, I engaged the Product Group and I have been informed that
this behavior is By Design. WU uses the OOBEComplete() Windows API call to determine whether OOBE is in progress or not, and if so, it will not perform automatic or UI update searches. HRESULT code 0x8024a008 is the WU error code WU_E_AU_OOBE_IN_PROGRESS.
WU automatic and UI updates won’t run while Setup reports that OOBE is still in progress. This is to prevent automatic updates from causing a system reboot during OOBE, which is – needless to say – a Very Bad Thing. This problem has always existed. Unfortunately,
when the computer is in Sysprep audit mode, Setup will report to WU that OOBE is in progress even though it might not actually be so. This is the reason that updates from WU UIs are blocked in audit mode.
I was having the same exact issue when creating an updated WDS image for deployment to select end-users for testing. At first, I thought I was doing something wrong. This process--having a VM boot into audit mode so that it can be fully updated
with Windows Updates along with new and updated third-party applications so to become the baseline/template for deployment--has worked wonderfully since the Vista days. And it worked perfectly with Windows 8. Why did Microsoft choose to deprecate
the functionality is beyond me.
Its bad enough there is so very little traction in the corporate/Gov't world for Windows 8/8.1. Now it seems that Microsoft, once again, is hades bent on destroying all that was good with Windows.
This is to prevent automatic updates from causing a system reboot during OOBE, which is – needless to say – a Very Bad Thing.
So this was a problem? Really? I don't ever recall that happening to me or ever reading about such an issue. Even if this "issue" was a problem, why not just add another switch to the sysprep command to allow admins to specify
the allowance of updates. Something like like sysprep /oobe /audit /AllowUpdates? Is that too hard or too much to ask?
So now with the current Windows-won't-update-in-audit-mode default, if I chose to deploy over 200 Windows 8.1 Enterprise clients, I now have to have ALL 200 machines contact Microsoft Update or my internal WSUS (or push via Shavlik) for updates. Regardless
of which method is used, the result is that 200 COMPUTERS must consume valuable network bandwidth for updates. Not to mention there is always several machines that never act right. Instead of having 200
identically configured machines, I end up with 200 similarly configured machines.
Exactly who is making these decisions? Has anyone experienced the OOBE update issue that Microsoft claims is such a problem?
So disappointing.

My computer (vista 64 bit os) received an windows update which hosed up Mozilla settings. I now cannot get to my bookmarks. where were they stored in earlier versions of mozilla and how do I get them back.

I have read several of the suggested help files but they have been of no help.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

UNABLE TO FIND PHOTOSMART SOFTWARE ON COMPUTER WIN VISTA 64 BIT FOR HP 7580

trying to make settings adjustment for l7580 and unabke to find photosmart software on computer. Help please.

Hi,
If you are referring to Photosmart essential software, it has been replaced with HP Creations which can be downloaded from link below.
http://www.hp.com/global/us/en/consumer/digital_photography/free/software/photo-creations.html
If the printer is HP Officejet L7580, there is not program as photosmart software for this printer.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP Photosmart C6280, Windows Vista 32 bit, Printer won't print. Says "printer offline".

Printer installed perfectly and worked perfectly for 8 weeks. Made no changes to the system or the local LAN. But now cannot print because of "printer offline" status. How do I correct this?

this may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&dlc=en&lc=en&product=3194498&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Vista 64 bit OS - Installer error when updating to iTunes 10.5

I've tried updating iTunes via "Download Only", but when I try to run the installer (tried by clicking on Setup Admin and even the Mobile App Manager) ... the installer get's to where it appears it is about to successfully complete and then rollsback all changes and states an error is keeping it from installing and that no changes were applied. Can anyone help me troubleshoot what is causing this?

Here's what I did...found it on another thread about this topic. Go to Start, All Programs, Apple Software Update. Let it update itself first. Then ONLY update to Quicktime 7.7. Then rerun the iTunes installation program. That worked for me, and I was getting the exact same message as above. I don't know if it was the Apple Software Update program or the update to Quicktime, but something fixed whatever was wrong.

Airport Express won't work simultaneously with Internet Sharing

I just purchased two Intel-based iMacs (each with standard configuration including Airport cards), and 1 AX. I placed iMac #1 in Room #1 (near my cable outlet), iMac #2 in Room #2, and the AX in Room #3, along with powered speakers. Using an Ethernet cable, I connected iMac #1 to my cable modem (and its broadband internet connection). I then turned on Internet Sharing, so that iMac #2 now connects to the internet through iMac #1. I also placed the AX in another room and connected it to powered speakers. Here's the problem: Airtunes only works (i.e., the AX-connected powered speakers only show up in iTunes) when I turn off Internet Sharing. The powered speakers "disappear" from iTunes as soon as I turn Internet sharing back on.
Is there any way to fix this?

I assume that you are having this problem with iMac #1 which is doing the sharing... Perhaps this happens because iTunes will not cross subnets.
Even though iMac #1 exists on both subnets (the Ethernet one and the one created by Internet sharing) it appears that iTunes is not using the subnet created by Internet sharing. Therefore it won't cross between the Ethernet subnet and wireless subnet.
The solution is to get an inexpensive wireless router and use that instead of iMac #1 to create your wireless network.

Urxvt won't get transparent with openbox, rgba and xcompmgr

Hello!
Yesterday I had a nice working openbox setup with real transparency in urxvt using
Urxvt*background: rgba:0000/0000/0000/bbbb
in ~/.Xdefaults.
Then I did some fiddling around with vga boot options to get a nicer console, and realized the terminals in openbox was not transparent anymore. I thought of it as a framebuffer issue with the nvidia driver, and set everything back to normal again. That did nothing however, the urxvt was still not transparent.
Reinstalled arch this morning for the sake of it, but I still can't get urxvt transparent with xcompmgr. Compositing seems to work with drop shadows and transset, but not when using rgba for urxvt.
Any ideas what I've done wrong?
My Xorg.0.log shows no errors.

Ah, thank you!
I forgot to change it back after I did some troubleshooting...it's all working now!

My computer, OS Vista 32 bit, clock won't get updated with internet sync system

Similar Messages

Maybe you are looking for