My D110 won't connect to my Dir 601 Wireless router because it thinks the MAC filtering is on.

The D-Link techs say the default status for MAC filtering on the router is "OFF". How do I get around this?

Here's a list of troubleshooting steps for your question: http://support.apple.com/kb/TS1398.

Similar Messages

Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks

Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks

Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
I tryed the reboot pocess, but it didn't fix it
I haven't tryed the restore to factory settings process,
Is there a way to downgrade to iOS 5.1 again?
Thaks

Trouble getting wireless to work with new D-Link DIR-655 wireless router

I have the Mac Pro with the Leopard operating system. I just recently bought a DLink DIR-655 wireless router to use with my internet. All my PC's can get online just fine, but my Mac is painfully slow and sometimes disconnects altogether. Is there some settings I need to figure out in order to make it work correctly?
Please help

I for one am having constant problems since I returned from a July honeymoon. All was good with a “Draft-N” D-Link router, but since returning I’ve had many, many connection failures WIRED. I have no Airport card in my Mac Pro 8 core. Same setup as when I left and all was well: Cable Modem>D-Link (NOW the sam DIR-655. Thanks, CostCo). CAT 5 to: Mac Pro, HP 2605DN printer, and connected to my hard-wired system to two rooms in my house.
Here’s a big clue for me. When I reboot into a bootable backup drive I haven’t updated since May 30, I seem to have no problems. Also, on the normal boot drive, my MobilMe (ugh) mail account was giving me fits. I deleted and tried to have it automatically fill in the settings as it used to, but now I need to supply all other sorts of info and can’t restore it. One last thing, if it helps. On my normal, badly-working boot drive, the iDisk says “MobilMe” On the older drive I’m on now it says dontruett.
I’d welcome advice. I’m taking a guess that some update I did since May 30 cause this and am ready to clone the working drive back to the main boot drive, losing a bunch of things in the process.
Any thoughts would be most welcome.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Wireless connection - do i need a wireless router or can i go via macmini?

Hello all
Bit of a newcomer to the whole networking side of things so excuse my ignorance.
I have a mac mini set up to the internet through a cable modem. Can I use airport to connect my new macbook to the internet via my mac mini or would i have to set up some kind of wireless network to to this? reluctant to shell out for a wireless router or one of the more expensive airport bits of kit if i dont have to!
any advice much appreciated!

Just reading the wireless posts. Here's a stupid question, although I think I know the answer? I have an iMac G5 running Panther - without an Airport card - connecting to the internet via Ethernet and a cable modem. Can I share this internet connection with my new Leopard MacBook via Airport?

My MAC mini looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shut down. I have to re select the network when restarting or waking the computer up. I think this just started with Lion. My iPod and iPad have no trouble.

My MAC MINI looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shuts down. I have to re select the network when re starting or waking up the computer. I think this just started with LION. My iPod and iPad have no problem remembering the wireless network.

Thank you BGreg. That is what I have been doing, and then it works just fine. I think it was doing the same thing in the previous version of Lion. I may be incorrect about that. I upgraded to 10.7.3 a few weeks ago, and then last week I reloaded the combo update, hoping it would help. Not so. Thank you for letting me know it is a common problem. I have tried permissions in Disk Utilities, and in Macaroni, both at least 4 times, plus numerous restarts. Nothing Improves. It still can not find the internet when it wakes up or gets up.

Connect AE to third party wireless router

Hi all,
Here's what I'm trying to do:
I have a Airport Extreme base that I want to connect to a non Apple wireless router (ISP wireless router). Anybody managed to do that?
I tried setting up the base as WDS connnecting to my third party wireless router but without any success. I can make all the connections, save my AE settings, but when I choose the newly set AE Base, I'm not connected.
Help would be greatly appreciated.
Thanks.
g

Most likely not, as very few non-AirPort routers can be extended with the AirPorts in a WDS. (ref: http://www.dd-wrt.com/wiki/index.php?title=WDSLinked_routernetwork)
You can, however, connect the AirPort Extreme Base Station (AEBS) to most non-AirPort routers, via Ethernet, and then set up the AEBS as a bridge.

My mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

How much will Apple charge me to fix my Ipod Touch 4g? It won't turn on because I think the battery is bad, and the home button doesn't work anymore... and it's not under any warrenty anymore

How much will Apple charge me to have my Ipod Touch 4g fixed? It won't turn on anymore more because I think the battery is probably bad, and the home button doesn't work either... its not under any warrenty either.

Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/

How to connect time capsule to existing wireless router

Hi
I am struggling to set up my time capsule is it possible to connect it to my existing wireless router or does the time capsule have to replace it as I have tried to do that but I cannot get a connection or signal to the WAN port?
I have the set up instructions but its not helping I am a complete novice at this.
Any help or links much appreciated

Yes you can.
Just plug the TC into one of the Ethernet ports on your router. WAN port on the TC.
Before you do that, set the TC up to be in 'bridge mode' in AirPort Utility.

D110 won't connect to server

HP Photosmart D110 will not connect to server. It will print from our iphones, ipads and laptop. I cannot get it to scan to our laptop even when I connect with a USB cord. Windows XP. Tried unplugging the power. I cannot print off the printer code to add it to my eprint account since it will not connect to the server.

hello my name is joe

Forgot password.Tried to wipe by using Find my iPhone but won't connect to wifi even though it is turned on in the lock screen.Then tried to restore through iTunes but couldn't because Find my iPad on. Removed the iPad but iTunes still not working. Help!

My daughter stopped using her iPad when she got an iPhone for Christmas. It has been over one month and she has forgotten her passcode. I tried to wipe it via Find my iPhone but it won't connect to the wifi even though wifi is switched on on the lock screen. I then tried to restore it through iTunes but was unable to becuase Find my iPhine was switched on so I removed the iPad from the device list only to find that it didn't solve anything with the iTunes situation and it still won't connect to the wifi. I ahve tried turning wifi on and off, tried leaving the house and re-entering all to no avail. Is there any other way to restore the iPad????

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Photosmart D110 losing network connection - I have to reboot my router every time I print

Every time I have to print the printer cannot be found by any device (desktop (mac and windows), laptop, iphone, or ipad).
The printer says it is connected to the wireless network, but no device can see it and the desktops show it as offline.
The only way to remedy the situation is to reboot the wireless router. I am not sure if this just happens over time or every time the D110 goes to sleep. Either way it renders the wireless feature of this device useless and frankly why have it if I have to reboot the entire network any time anyone in the house wants to print something. This is quite frustrating.

Try update the firmware of router.

Firefox won't connect to web or even home router. It was preinstalled and started in safe mode didn't change nothing. Other browsers work good.

I cant connect to web or even my router. Iuse chrome now and can login to my home router and also web. I've stoped my antyvirus and firewall and still nothing. i have ff ver 24

Hello,
See if this may fix your problem [https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can?esab=a&s=Firefox+won%27t+connect+to+web&r=1&as=s Server not found or Unable to connect ] error.
Please reply back to us.

Have a D-Link DIR-655 Wireless Router and Having WEP or WPA issues? READ TH

I just contacted D-Link with the following Letter and wanted to post this here for anyone that may need it:
"I have to say that I do truly enjoy this product since I got it to work, but I have some things to clear up.
Are your Level 1 techs truly trained in networking equipment? I called 3 times for help with this issue and no one was able to help me nor completely understand my problem... I apologize for the tone, but it is frustrating when a tech repeats a procedure 4 times (I can understand repeating something 2 times if needed) - when I tell him it doesn't work I feel we should move onto another trouble shooting step. So what I would like to do is tell you what I did to fix the issue in case another person runs into this and they call you for support.
I have a an iMac (but this problem will be reproduced on any Mac with an Airport Extreme card) and I can only get on the internet wireleslly because of the location of my computer and the cable modem/router.
The DIR-655 that I picked up from best buy was Hardware Revision A2 and the Firmware was 1.05 (the latest at this current time)...
If I setup this router with the default settings. The wireless connectivity worked fine - although if I were to apply any type of security to the wireless settings (WEP, WPA 1 or 2 Personal) I would not be able to join the network. The Mac OS would keep telling me that there was an error joining the "xxxxxx" network (where xxxxxx was the SSID of my router). Anyways after tinkering for almost 3 hours and running back and forth resetting the router and testing with multiple Macs I was stumped and decided to get a copy of the 1.04 version of the firmware and downgrade the router back down to see if it was an issue with the latest firmware. Guess what - works perfect...
I would love to see a version 1.06 come out soon that addresses this issue and has the bug fixes from 1.05. But I can guarantee you there is something in the 1.05 firmware that will stop Macs from wirelessly connecting to the router when any type of wireless security is in place.
Please advise your techs of this issues and hopefully come up with a fix for this issue.
Thank you for your time."
I hate when tech support eats half your day with something that could have been fixed in minutes if people are properly trained.
Message was edited by: Twiggs462

I seem to remember that one post/thread had comments about successfully using this device but I can not seem to find it in either iChat 3 or the iChat 4 (iChat and iChat Sharing in Leopard)
The closest I got was a reference to it in this thread http://discussions.apple.com/thread.jspa?messageID=7296647&#7296647 but no link.
6:39 PM Saturday; August 16, 2008

My D110 won't connect to my Dir 601 Wireless router because it thinks the MAC filtering is on.

Similar Messages

Maybe you are looking for