My Desktop went blank and an error message appeared saying C:\Windows\system32\config\systemprofile\Desktop refers to a location...
This the whole error message: C:\Windows\system32\config\systemprofile\Desktop refers to a location that
is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information
might h ave been moved to a different location
I restarted the pc and through the safe mode i copied the Desktop file that was missing at C:\Windows\system32\config\systemprofile\
from C:\Users\User. I restarted but i still get the blank desktop.
Can you guys help me out?
Thnx a lot LomM! My younger brother run the check disk and now it's working. But now im facing a different problem. With the sound drivers. I have not sound at all. And at Device manager I see yellow marked devices, giving me the code error 52 ("Windows
cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)").
So, I unistalled and re-installed but nothing. Still yellow marked. I did the Recovery thing (a couple of times using different dates ) but it did not complete successfully.
So I disable driver verification, while i was restarting my computer and now im getting the code 39("Windows cannot load the device driver for this hardware.
The driver may be corrupted or missing. (Code 39)").
it's that C:\Windows\System32\drivers\ktshunk.sys which is not getting verified. Any ideas?
Similar Messages
-
C:\windows\system32\config\systemprofile\desktop was missing or could not be accessed
Dear All,
I am using Windows server 2008 R2. Last day the electric power was suddenly shutdown. When I reboot server, when I login with user administrator, my desktop don't appear, I found error:
C:\WINDOWS\SYSTEM32\CONFIG\SYSTEMPROFILE\DESKTOP WAS MISSING OR COULD NOT BE ACCESSED.
I try log in safe mode, it's also have same error.
I can't run any program. It's appear error that I don't have permission to access.
Could you help me to fix this error?Check this URL : http://social.technet.microsoft.com/Forums/en-US/2eb4224d-3e8b-4705-8ed0-260012be2081/location-not-available-cwindowssystem32configsystemprofiledesktop-is-not-accessible-access?forum=winservergen
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook. When I do this nothing happens. Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine. Any ideas what I'm doing wrong? Do I need to enable something on the Macbook?
An update...
I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
So -- anyone get through this connection problem and have any ideas to share??
iMac Mac OS X (10.4.7) -
I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
I have tried a few things but iTunes closes right after i click okay. Anyone know anything?Look in your Home > Music folder. There should be an iTunes folder there and it should have a number of files and folders including one called library.itl You want to guide iTunes to that file. If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.
-
I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me
Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over. -
I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2: "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." I have dug a little bit into possible problems but haven't found a solution yet, one note is that the network connection is OK. A response would be highly appreciated! Thanks in advance.
Hi c1r1g1,
If you are having an issue connecting to the iTunes Store, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden -
Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)
Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W -
I purchased and downloaded Lightroom 5.5. After installing it, I was prompted for the serial number. When I entered it an error message appeared saying it was an upgrade serial number and I need to enter my original purchase number. This was my original purchase, not an upgrade. Now what do I do?
It sounds like you bought an upgrade from Adobe. How much did you pay? The upgrade is about $80, and the non-upgrade is about $150. If you bought an upgrade version and had no previous version, you would see what you're seeing.
If that is the case and I were you, I'd call Adobe, and arrange for a refund and to order the correct version.
Hal -
Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, PaulYou can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec. -
Hi, when I download Adobe Creative Cloud I open it and then a message appears saying "...Error Code 204", what I have did, or what do I need to do to make it install properly !?
Walegena37827201 please see Error downloading and installing Creative Cloud application for information on how to resolve Error 204. If you have any questions regarding the steps listed in the document you are welcome to update this discussion.
-
why won't my i phone back up? I plug in on itunes and then a message appears saying there was an error.what is wrong with it?
It might be helpful if you told us what the error message actually says.
-
While downloading an album in from the Store, one song was interrupted. I have followed the instructions from apple about resuming the download, but every time I do so the same error message appears saying the download was interrupted. I am having no connection problems, have rebooted my computer, downloaded the lates version of iTunes, etc., yet nothing changes. Has anyone else experienced this, and are there any workarounds. Sadly the problem hit on one of the best songs of the album.
I had the same problem so (assuming under the Purchased items in the Store you have a song stuck at 'Downloading'):
I went to Music, then Artists.
From there I chose the album.
The song that failed to download had the cloud symbol next to it.
I clicked the cloud symbol and the song completed the download for me.
(Please note this was in iTunes for Windows - I expect it to be similar in iTunes for Apple)
Message was edited by: UbergeekRFC - parenthetical note added
Message was edited by: UbergeekRFC - added note about song stuck as downloading -
I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
Thanks in advance
AdamIf you get a network timed out error, try disabling the security software on the computer during the download and install.
You can also try a direct download andinstall by:
iPod, iPhone and iPad Firmware Download
Nera the top of the page aretheinstructions for selecing the download for the install. -
every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."
Open the iCloud preference pane and uncheck the Contacts box. Do the alerts stop?
-
macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple, the same error message box appeared again and again every time OK was clicked. Now the macbook will not turn on at all
If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Maybe you are looking for
-
Urgent Help Needed - Safari no longer opens
I woke up this morning and all of a sudden Safari won't open, it doesn't respond and then quits itself. I've tried rebooting, re-installing and repairing disk permissions and nothing works. I've heard that this may have happened to other people as we
-
How to hide fields in table view
Hi, I'm populating the contents of an internal table in a table view. I want to know how to hide few fields in table view. I'm working on classical BSPs.. no MVC and I have not used iterator. Thank you Sreesanth.
-
Hi, for the client we have customized the ABC analysis report which shoes the material details and its status for the last 5 years,with last purchase and sales date. Some materials are not been caught in this report. What may be the reason for this?.
-
Use variable in getURL command
I have some links and I want to use them in flash I put them into the XML file and i read them and save into a Array variable now I put them into getURL like this " getUrl(myArr[1]) " I don't have problem when I used them in flash I press CTRL+ENTER
-
Photoshop Elements 13 Mac - constant registration requests
Hi. I have just installed Photoshop Elements/Premiere 13 on my Macbook Pro from disk. Installation appeared to go smoothly. When I try to launch the products, I get a Sign in Required screen. I sign in and get the software license agreement, which