My droid makes a beeping sound before making or recieving call

My droid beeps three times before making or receiving calls.

    Hello Sparks05
I'm sorry your getting that sound. I'd love to get this addressed. It sounds like call connect is enabled. Let's dive in and get this fixed! What device do you have? Did this start after an application was downloaded?
JoeL_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • My MacBook pro will not boot up. It make a beep sound.

    I tried to boot up my MacBook pro and it make a beep sound. Screen is blank.

    Read this carefully and see if this is what you are experiencing: http://support.apple.com/kb/HT2341

  • My MacBook Pro makes a beep sound every few minutes.  Why?

    My new MacBook Pro makes a beep sound every few minutes.  Why?

    If you have a Seagate 500 GB 7200 RPM drive model ST9500420AS or ST9500420ASG, there is a widely reported problem with MacBooks that causes intermittent clicks and beeps.  If that is your scenario, google for details.

  • I am trying to open my macbook air but it has blocked and it makes a beep sound.

    I am trying to open my macbook air but it has blocked and it makes a beep sound. It wont turn on. Is there something i can do?

    Assuming this is not the normal startup chime, one beep means no RAM...so something in the path to the RAM has failed.
    Best option is the Apple store genius bar to have the techs test the system and see what is going wrong.

  • My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. Help please.

    My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. What should i do?

    If you recently installed new ram, make sure it is seated properly.
    If that doesn't work try removing one stick at a time to see if one is dead or put original ram back in.

  • Computer makes a beeping sound randomly, reason unknown?

    Why does computer make a beeping sound randomly? Can't find any reason for it.

    Please look over to see if any apply:
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usabl

  • Power adapter makes constant beep sound

    Hi,
    I have HP pavillion dv6 and its almost 3 years old. Recently the power adapter makes constant beep sound and the laptop wouldn't get power.
    Any idea as why is this happening. Could someone please provide some solution?? Sholud I buy a new one?

    Hi P_Bharti,
    Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I saw your post regarding the power adapter. Have you tried another adapter to see if that gets the notebook powering on. Do you see a light on the power adapter at all? It does sound like the power adapter has failed. If you can provide me with your product number I will be able to tell you your batteries part number.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Beep sound for every minute in call recordings

    Hi,
    I am using cistera convergence server for call recordings. For every recording, I am observing a beep sound before the recording starts and followed by exactly every 60 seconds. I didn't see any beep in live calls. This is only when I play the recording wav file.
    Cistera support guys said there is no problem on their server end and suggesting to check in CCM/IVR.
    Can anyone suggest me?
    Thanks,
    Mady

    I am not familiar with the recording system you use, but there is something in Call Manager that may be appropriate. This is often configured when you set up CUCM silent-monitoring for CTIOS.
    Monitoring Notification Tone
    A monitoring notification tone can be configured using the Service Parameter Configuration page in the CCM Administration Interface. There are two entries:
    Play Monitoring Notification Tone to Observed Target
    When set to true, this option will play the tone to the monitored party (usually an agent).
    Play Monitoring Notification Tone to Observed Connected Target
    When set to true, this option will play the tone to the party to which the monitored party is talking (usually a customer).
    A monitoring notification tone can be configured using the Service Parameter Configuration page in the CCM Administration Interface/ Select Server/ Select Cisco CallManger (active) for Service.  Look for "Clusterwide Parameters (Feature - Monitoring"). If these are set to true, set them to false and see what happens. A CM restart may be required.
    Regards,
    Geoff

  • How do you reduce/turn off keypad sound when making a phone call

    How do you reduce/turn off keypad sound when making a phone call?

    If I understand the question correctly, it is not about turning off keyboard clicks, it's about silencing the beeps made when manually keying in a  phone number. With keyboard clicks turned off, the beeps still sound when keying in a phone number. If I'm reading the iPhone User Guide correctly, it explains how to turn off keyboard clicks but not how to silence the   beeps when keying in a phone number. The only way I have found to silence the beeps is to put the phone into silent mode.

  • My mac book air makes 3 beeping sounds

    my macbook air is making 3 beeping sounds and has a black screen. thisnhas happened before and i got a new hardware installed. how do i make the beeping noises stop? i want to avoid spending money again to get this fixed, please help

    What have you installed on the Mac? 3 beeps indicates that memory is defective. As the memory on a MacBook Air is soldered, the only solution is to take the computer to an Apple Store or reseller. First, try to remove that hardware that you have installed

  • External Hard Drive Doesn't Appear and Makes a Beeping Sound

    I have a Mobile XXS external hard drive from Freecom (approx 460 GB) that works fine on my father's G3 iBook, but when I plug it into my G4 Aluminum Powerbook (OS 10.5) it runs, but doesn't appear on the desktop. It also makes a continuous beeping sound. I want to back up all my music projects. As far as I know the USB ports work because I'm able to use my iPod. This isn't an Apple product but the Freecom website doesn't have a very active forum. I was wondering if anyone had any experience with something like this. I appreciate any help.

    It sounds like a USB-only hard drive, and the Powerbook G4 is notorious for not providing enough power for many external USB drives.
    The usual suggestions are:
    -Try a double (Y-style) USB cable to draw power from two ports for the drive
    -Add a mains power adapter to the drive, if possible
    -Try using the drive through a powered USB hub
    Firewire drives don't seem to suffer from this problem.

  • IPod Touch makes a beep sound at random

    I have a first-generation 16GB iPod Touch. I have noticed the unit occasionally makes a high-pitched beep sound (about five tones in quick succession) while I am listening to it. The unit is always docked and playing music, and it "ducks" the music under the beep, then returns the music to its previous volume. It seems to do this with no apparent pattern or predictability. What does this beep mean and how I can disable it?

    does anyone have any suggestions?

  • TS1365 I have a mac pro that when i turn it on the sleep light blinks and makes a beeping sound but my screen is black. Any idea's as to why this is happening and how do i fix it?

    I have a mac pro that when i turn it on i get a black screen and the "sleep light" is on but i also get a beeping sound. How do i fix this? I have powered off turned it back on and tried the command, option, P, and R and still nothing

    Welcome to the Apple Support Communities
    How many beeps do you hear?

  • Does anyone have a new ONT unit that does not make a beeping sound if you unplug the battery?

    Hi everyone,
    Anyone here that have a Verizon FiOS ONT unit that doesn't beep when you unplug the battery? 
    Apparently the new unit alarm noise is supposed to turn off when you remove the battery. 
    FiOS ONT Battery
    I have an older model that continuously beeps if the battery is bad and if it's unplug.  Basically, the box demands a new battery.
    I called Verizon and asked them to install a new ONT Battery box because I believe the new one won't beep if the battery is unplug via their instructions.  They are coming in a couple of days.
    I just want some confirmation from users that the new box doesn't make the beeping noise if the battery is unplug.

    You can now opt out of the battery at the time of install, if you do then the tech should disable the alarm at that time. Otherwise you can disable the alarm by removing the batter and THEN rebooting the system by unplugging the power supply while the battery is unplugged. you plug it back in and the system reboots and it should recognize there is no battery upon reboot and then it should not beep anymore. If it does still beep then yeah your going to need that dispatch.

  • Can I source an environment before making a system call from the database

    I can execute system calls from the database like
    Process proc = Runtime.getRuntime().exec("env");
    but I am unable to source an environment before making the call.
    Our goal is to from within the database to execute tkprof on a
    raw trace file then load both files into clobs in a table. We can load
    the raw trace no problem, we just cannot figure out how to execute
    tkrprof on the raw trace then load its output.
    Anyone know if this is possible to hava java get a runtime and then call
    an environment file to source the environment so that path's and other environment variables are set prior to executing another system command.

    Thanks for that...but can I do multiple edits in my Stored Procedure Vaibhav and pass back something that I can then utilize in my SSIS? For example...
    One and Only one Member Span...so I'd be doing a SELECT COUNT(*) based on my match criteria or handle the count accordingly in my Stored Procedure and passing something back via the OLE DB Command and handling it appropriately in SSIS
    Are there "Diabetes" claims...again probably by analyzing a SELECT COUNT(*)
    Am I expecting too much from the SSIS...should I be doing all of this in a Stored Procedure? I was hoping to use the SSIS GUI for everything but maybe that's just not possible. Rather use the Stored Procedure to analyze my stged data, edit accordingly, do
    data stores accordingly...especially the data anomalies...and then use the SSIS to control navigation
    Your thoughts........
    Could you maybe clarify the difference between an OLE DB Command on the Data Flow and the Execute SQL Task on the Control Flow...
    You can get return values from oledb comand if you want to pipeline.
    see this link for more details
    http://josef-richberg.squarespace.com/journal/2011/6/30/ssis-oledb-command-and-procedure-output-params.html
    The procedure should have an output parameter defined for that
    I belive if you've flexibility of using stored procedure you may be better off doing this in execute sql task in control flow. Calling sp in data flow will cause it to execute sp once for each row in dataset whereas in controlflow it will go for set based
    processing
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

Maybe you are looking for