My Droid Mini will go to "sleep" and then I click the side button to turn it back on and it flashes off. It does that repeatedly. Eventually it brings me to the lock screen. But it does that over and over again. It's starting to happen more and more. Any

and it flashes off. It does that repeatedly. Eventually it brings me to the lock screen. But it does that over and over again. It's starting to happen more and more. Any ideas/advice on this?

The proper way to close Firefox is through the File menu "Exit" or the equivalent with the Firefox button.
More detail in item '''#38 Firefox already running '''
of
[http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6) (#fx4interface)]
Firefox already running, to properly shutdown Firefox when closing the last window use File → Exit/Quit (or Firefox button → Exit). Closing Firefox with the [X] in the upper right corner closes the window ("Ctrl+W") but that does not necessarily close Firefox if it has subtasks running. If you want to close and reopen Firefox use the "Restart" within Add-ons if you made a change requiring a restart, or install "[https://addons.mozilla.org/firefox/addon/restartless-restart/ Restartless Restart]" ("Ctrl+Alt+R") which will allow you to take Firefox down and restart without having to check the Windows Task Manager to see if Firefox first actually ended. [http://kb.mozillazine.org/Firefox_hangs Firefox hangs]

Similar Messages

  • My iMac camera keeps disconnecting while i'm on facetime, and then i don't know how to turn it back on, help?

    Any body help? I do not know how to reconnect the camera on iMac?

    Hey man!
    Basically those playlists were just 'Smart Playlists' created by iTunes.
    To re-create them, click File > New Smartlist. Then select 'Date Added', 'in the last', '2' and 'weeks. Live updating should be checked!
    Then name the playlist 'Recently Added'
    Hope it helps!

  • Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

    Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

    1. Triple-click the line below to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu. An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.

  • I purchased the digital av adapter so that I can plug my iphone4s to my flat screen. It does mirror to the TV but the picture is red/pink. How can I fix it?

    I purchased the digital av adapter so that I can plug my iphone4s to my flat screen. It does mirror to the TV but the picture is red/pink. How can I fix it?

    Are you using the YRW composite connectors on the TV or the RGB composite connectors? - the cable will only work with YRW and the correct input choice on the TV - if you are connecting correctly then I am sorry I don't have any other suggestions

  • My iPhone 5 having a problem that I can open my lock screen but I cannot slide open my phone even Slide to power off too, It just cannot slide.

    My iPhone 5 having a problem that I can open my lock screen but I cannot slide open my phone even Slide to power off too, It just cannot slide.

    Hello MarvanCheong,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    Best of luck,
    Mario

  • I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

    I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

    Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

  • When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that cant be the problem.

    When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that can't be the problem. I was thinking maybe it is just because of the cold but, I don't like having my iPod doing that whenever I come back from the cold. However, I was in class too and this problem happened but it was inside! So I am very worried, I have dropped my ipod a few times but it hasn't fallen that hard to effect it.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • A way to have notifications appear on lock screen but not activate the screen each time I receive one?

    Using an iPhone 4 with iOS 5.0.1 I like how I can have my notifications appear on my lock screen (usually for a new email) but dislike how every time I receive a notification, my iPhone screen lights up with the notification. Is there a way to continue receiving notifications on my lock screen but not have the screen illuminate every time I receive one? It's a constant distraction when I am at work, and I like to keep my phone turned face-up on my desk in case I get a call.

    No

  • TS3681 I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?

    I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port. (Make sure you have the latest version of iTune on your computer)
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • I have lost my iPhone 5 and i have an iCloud but the iCloud was not turned on on my phone; nor is it setup with "Find my iPhone" App. Can i still find my phone? soon that is.

    I have lost my iPhone 5 and i have an iCloud but the iCloud was not turned on on my phone; nor is it setup with "Find my iPhone" App. Can i still find my phone? soon that is.

    KreeBL wrote:
    I have lost my iPhone 5 and i have an iCloud but the iCloud was not turned on on my phone; nor is it setup with "Find my iPhone" App. Can i still find my phone? soon that is.
    Only if you walk around and look for it/ask others if they have seen it.

  • Phone 5 freezes at lock screen but control centre and answering calls woriks, to work again i should press lock button then it works normally and freezes again if i leave it for 1min or less icant understand what problem isit,restored in dfu,normal no use

    phone 5 freezes at lock screen but control centre and answering calls woriks, to work again i should press lock button then it works normally and freezes again if i leave it for 1min or less icant understand what problem isit,restored in dfu,normal no use i still have problem please try to sovle it

    i tried it but no use
    i restored it as new device and kept it idle over night but no use

  • HT4113 So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

    So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.

  • Installed Photoshop Elements 13.  Upon activation, get through sign in screen, but when doing serial number validation, validate goes round but does not validate.  Connect Later is only way out of screen.  How do I validate.  Checked account but product n

    How do one validate Photoshop 13. (Windows 8) Upon activation, get through to sign in screen, but when doing serial number validation, validate goes round but does not validate.  Connect Later is only way out of screen.  Checked account but product not listed.  Installed with serial number that was sent  by Adobe.  Have attempted numerous times at different times of the day.  On-line connection working.

    Have you bothered to do any research at all? Not every app was upgrade to 5.5. Those that weren’t will next be upgraded to CS6.
    Bob

  • Why does my web page, created on iWeb, look correct on Safari but has thick black lines all over it in Firefox?

    Why does my web page, created on iWeb, look correct on Safari but has thick black lines all over it in Firefox?

    What's the URL of your site so we can examine it first hand?  I assume those black lines are around photos or objects that have had a frame or drop shadow added to it, right?  If so that's a known issue. 
    There's a workaround for that in this tutorial: #7 - Converting Photos w/Frames, Drop Shadows and/or Reflections into a Single Image File.  That should get rid of those black lines/boxes.
    OT

  • I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

    I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

    Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

Maybe you are looking for

  • Output as PDF via outlook

    Hello All, I am sending the output of a sales order as a PDF attachment via outlook mail. It wokrs fine. but only worry is the Chinese characters are appearing strange and not what we need. If I print / preview the output in SAP it shows the Chinese

  • Multiple Sites w/ GoDaddy Host

    I created a website with iWeb, bought a domain name and hosting space from GoDaddy, published the site to a folder and uploaded it to GoDaddy with Fetch. Everything worked fine. I created another user account on my computer as a way to create another

  • Order my select statement by fiscal year

    I want to order my select statement by fiscal year of DATE_OF_SEPARATION, inst_num, trauma_num The fiscal year is between YYYY/04/01 to YYYY+1/03/31 How would I write the order by statement order by inst_num, trauma_num Thanks Brendon

  • Installing Air 3.7 has broken mx library

    I am on mac, Flash Builder 4.6 I have downloaded the AIR 3.7 sdk.  made a copy of my flex sdk then placed the sdk tbz file in there I then ran these two commands cd /Applications/Adobe\ Flash\ Builder\ 4.6/sdks/flex_sdk_4.6 tar jxvf AIRSDK_Compiler.t

  • Can Firefox be installed on a Motorola i465 Boost phone?

    Can Firefox be installed on a Motorola i465 Boost phone?