My email on my mac (which has iCloud) is giving me a message that the server has rejected my password.  When I go onto the internet and sign into iCloud there, the password is accepted.  What am I doing wrong??

My email on my mac (which has iCloud) is giving me a message that the server has rejected my password.  When I go onto the internet and sign into iCloud there, the password is accepted.  What am I doing wrong??

Thanks...I just spent an hour on the phone with Apple Support sorting out the password issues for my various devices!!!  My password was compliant with the new rules, but there were some (mysterious) setting issues that required me to delete mail from my MacBookPro and add it back, again.  All in all, it was an hour of trouble-shooting which resulted in what, I hope, is a good fix.
Thanks for your help...wishing you continued success in the support community.

Similar Messages

  • I have a new internet service provider and router and need to re-connect to my airport express. However, Airport Express is not showing up. Also, when I launch Airport utility (new and 5.6), it shows no available devices. What am I doing wrong?

    iMac (2008), 10.7.5
    Airport Express (2008)
    Comcast wifi router

    The AirPort Express must be reset back to factory default settings first, and then reconfigured again.
    To reset the AirPort......
    Power off the device
    Wait a minute
    Hold in the reset button first, then continue to hold the reset button in for an additional 10 seconds while you simultaneously plug the AirPort back into power
    Release the reset button after the hold period and allow a full minute for the AirPort to restart
    Try using AirPort Utility 5.6 now to see if it will "see" the AirPort so that it can be set up again.
    If you are using AirPort Utility 6.x, you must first click on the Other WiFi Devices tab, then click on AirPort Express to start the setup wizard

  • I'm working on trying to pair my bluetooth keyboard with the Mac. It seems to pair fine, I'm able to enter the code but when I go to click on "enter" it won't go.  Any suggestions on what I'm doing wrong?

    I'm working on trying to pair my bluetooth keyboard with the Mac.  They seem to pair just fine, I can enter the code but when it's time to "enter" it won't take it.  Any suggestions on what I'm doing wrong??
    Thank you!!

    Hi, Chris. 
    Thank you for visiting Apple Support Communities. 
    Here is an article I would recommend going through when experiencing this issue. 
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Cheers,
    Jason H. 

  • I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong?

    I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong? The receiver is a Lenovo eHome OVU430006/01 USB IR Receiver.

    Hello,
    You would need to pair the Apple Remote with the receiver. So I would use the generic Mac/PC receiver and follow these instructions:
    http://support.apple.com/kb/HT1619
    If that doesn't work then check in System Profiler to see if the IR receiver has been recognized by the PowerBook's hardware. You may require the install of drivers for this device to be recognized.
    Best of luck

  • Having switched from iPhoto to ICloud Photo I find that their are many, many double and triple photos. Just added a small folder of photoes and all are showing in photos as doubles. What am I doing wrong?

    Having switched from iPhoto to ICloud Photo I find that their are many, many double and triple photos. Just added a small folder of photoes and all are showing in photos as doubles. What am I doing wrong?

    Martin,
    I am not sure, however you may want to post in the Photos forum, please click Photos for Mac to get there.

  • I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

    I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

    The screen that says "Download Now" also shows the proposed iTunes version number (in the box below):
    Be sure it indicates 11.1.3.
    If it is, here's further troubleshooting:
    http://support.apple.com/kb/TS1538

  • HT204380 I have an iphone4S and I can't get FaceTime to work. What am I doing wrong????

    I have an IPhone 4S and I can't get FaceTime to work.
    What am I doing wrong??????

    FaceTime uses Wi-Fi and recipient must also have FaceTime and on Wi-Fi.
    Also FaceTime sever could be down.

  • I am getting account not verified when setting up icloud. I check my email and nothing shows up in inbox or junk. What am I doing wrong?

    I am getting account not verified when trying to set up icloud on my iphone. I check my email and there is nothing in my inbox or junk. What am I doing wrong?

    Welcome to the Apple Community.
    Put in a request for another verification e-mail to be sent to you.
    Start here, change your country if necessary and go to manage your account.
    Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you.

  • My password seems to be working but my apps on my i pad will not update?  what am i doing wrong?

    i hove not been able to update apps on my ipad for weeks  my password seems to work but it will not update apps?  what am i doing wrong?

    What happens when you try to update? That is the missing element here? Without knowing what you are experiencing, it's really difficult to suggest what to do. I will go on the assumption that you are seeing the "waiting" icons. If that's the case, this is my standard response that includes quite a number of things to try.
    Even if it is not the "waiting" icons issue, one of these suggestions might help anyway.
    1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
    2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
    4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
    6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • HT5625 i want to update an app but when i put in my password a box pops up and it says "cannot connect to itunes store.  what am i doing wrong?

    when i try to update an app a box pops up and says "cannot connect to itunes store"   what am i doing wrong?

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Real newbie-I can hear my loops in my library, but when I drag them to a track, there is no audio.  What am I doing wrong?

    Real newbie question-I can hear the loops in my library, but when I drag them to a track, there is no audio when I playback or record.  What am I doing wrong?

    You probably put Midi loops (green) on audio tracks, and audio loops (blue) on Midi tracks.
    That won´t play.
    JanD

  • Not able to change slide duration. It's set to 4.0; I change it to 3.0 and it changes to 6.5 or something. What am I doing wrong?

    I can't seem to change the slide duration in iMovie. It's set to 4.0 automatically. I change it to 3.0. The program resets it to 6.5 or something I never intended. What am I doing wrong?

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • When i choose a picture in Lightroom 5, a popup says file not found.  What am i doing wrong?

    When I choose a picture in Lightroom 5, and click on Develop, it was file not found.  What am I doing wrong?

    It means the photo has been moved, renamed or deleted outside of Lightroom (Hint: don't do that)
    To fix the problem, either move the photo back to where it was (using your operating system), or re-connect in Lightroom following these instructions: Adobe Lightroom - Find moved or missing files and folders

  • HT201364 I just installed more memory and I still can't install OS X mavericks what am I doing wrong?

    I installed more memory becase I got a message that I didn't have enough how I went from 4g to 16g and still not enough?????

    Okay,
    It would help us to help you if we could have some more technical info about your iMac.
    If you so choose, Please download, install and run Etrecheck.
    Etrecheck was developed as a simple Mac diagnostic reporting tool by a regular Apple Support forum user and technical support contributor named Etresoft.
    Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
    This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
    It is not malware and can be safely downloaded and installed onto your Mac.
    http://www.etresoft.com/etrecheck
    Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.
    Thank You.

  • I bought an iPad from a friend and can't activate it under my account!  What am I doing wrong?

    The previous owner says it's been deleted from iCloud account, but when I try to activate it, it still says it's linked to former owners email!

    He needs to sign onto his iCloud account on a computer and remotely erase the device: https://www.icloud.com
    Once he has erased the device, then he can click on "Remove From Account"
    Cheers,
    GB

Maybe you are looking for

  • SOAP Basic Authentication - How to create a limited user access

    Hello I have a lots of scenarios that use XI´s WebService for integration. For the 3rd party systems be able to use the WebServices, they need an authentication in Web Application Server. The question is: How can I create a user with LIMITED access t

  • Drag and Drop HELP!

    OK - Here's my problem. Just moving from AS2 to AS3 and trying to create a drag and drop template. I need to re-use a single drag selection multiple times, to multiple targets and then graded. For example, say I was building a car by dragging parts o

  • Edit existing Dynamic Distribution Group

    I'm running Exchange 2007 RTM I have an existing Dynamic Distribution Group "All Staff" - here's the filter taken from 'Properties' (&(!cn=SystemMailbox{*})(&(&(& (mailnickname=*) (| (&(objectCategory=person)(objectClass=user)(|(homeMDB=*)(msExchHome

  • Running SOLMAN_SETUP

    I have installed Solution Manager 7.0 EHP1, setup the SAP GUI to connect to the system. I believe the next step is to run SOLMAN_SETUP basic configuration. In oder to do this do i need to create a user? At the moment when i open the SAP GUI and conne

  • Thanks for getting the 12.0.1 update out

    Nice to see a number of serious issues addressed this quickly.