My envy 100D410 won't start it show initializing

My Mac says the printer is off line and I have re-started the AirPort router. And I have re-strated the printer after shutting it down for over two hours in one instance. When I plug it back in it starts up and then shows initializing? How can I get beyone this>

Hi,
Temporarly plug the printer with a USB to you Mac and try to revocer the printer by using the patch below:
http://ftp.hp.com/pub/softlib/software12/COL37909/mp-92884-2/HP_Firmware_Updater.dmg
If there is no change, try plugging the device directly into another power socket.
If the issue persists with no change, contact the local HP Call Center in order to service your product:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • HP Pavilion Entertainment won't start just shows blue screen

    HP Pavilion Entertainment won't start just shows blue screen. Sometimes says missing operating system after changing boot order. I have seen error message 303. This happened after I couldn't stop coolncheap popups so I saved everything to another computer and did a complete restore. When I was in the process of getting it back to working order I allowed updates recommended and optional and then everything started.

    Also pressing F11 won't take me to recovery

  • Ipod touch won't start, just shows screen saying to connect to itunes.

    Ipod touch won't start or charge, or do anything other than when I plug it in, the screen shows a picture of the usb cord connecting to itunes. When I tried to connect to itunes using my computer, nothing happened. Any suggestions?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

    Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
    This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
    I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
    MacBook Pro (Retina 13-inch, Mid 2014)
    Processor 3 GHz Intel Core i7
    Memory 16 GB 1600 MHz DDR3
    Graphics Intel Iris 1536 MB
    Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
    Thanks!

    There is no need to download anything to solve this problem.
    If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
    You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Besides the files listed in the linked support article, you may also need to remove this file in the same way:
    ~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
    After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • My ibook G4 won't start it shows black screen and loud fan sound only

    my ibook G4 won't start, after you press the on key it makes a loud air sound, almost like a kernel panic sound, no screen light just the sound, it will turn off by pressing the on key again. Is there anything I can do to get it on?

    Your very welcome.
    You would need to apply pressure to the left side of the track pad about 2cm out. I found applying pressure to both sides of the track pad more successful. All you have to do is push down on the case, while making sure your iBook is on a flat surface. If you have someone willing to help you, you can get them to apply the pressure while you back up your files. Other methods would involve tempory repair or removal of the hard drive. If you remove the hard drive to be read by another computer, you would need a cady to put the drive into. These caddies are cheap enough. Would suggest you use a USB cady and plug your drive into that, which would act as USB external drive. I'd suggest you get a USB cady to remove your files, be careful to what operating system you have on the computer you are using to get the files off. Windows OS won't read a MAC OS X drive (extended journal format) It would need to be another  Mac or a Linux PC.
    If removing the hard drive is something your not to confident in doing, you could alway pay a computer repair shop to remove it for you. (Maybe they would have a USB cady for a 2.5 IDE hard )
    Here is a link giving further details about this chip solder problem.
    http://macintoshhowto.com/hardware/how-do-i-get-my-broken-g4-ibook-fixed.html
    Here is an example of a USB cady
    http://www.amazon.com/SANOXY-External-Enclosure-Case-Laptop/dp/B000FNBYKW/ref=sr _1_sc_13?ie=UTF8&qid=1338742155&sr=8-13-spell
    Let's hope just applying enough pressure is enough to get your files back up.
    Best of luck!

  • IPad 2 is won't start only showing the apple sign

    Hi,
    my iPad2 died on me. It was very low in battery, so I started charging it. Everything looked fine until the apple sign came up. And that is it. It won't start. It doesn't connect to iTunes and re-start doesn't work either. Any suggestions? Thanks for all help!

    BTW - it doesn't seem to charge either. Apple sign only comes up while connected to power output (and trying to re-start), when I disconnect and try to re-start I get the "low battery - connect to power" sign - even though the iPad has been connected for several hours.

  • GarageBand won't start, keep on initializing....

    Dear all,
    I tried to open GarageBand this afternoon for the first time (after using this new imac for almost half a year) today and it couldn't start.
    The 'Initializing..' window ran continuously for a long time (more than 2 mins) with no progress. I force-quitted and try loading it again several times and it didn't work.
    Here's the error message i got when I launched GarageBand from the terminal:
    2009-01-26 21:22:41.514 GarageBand[7875:10b] Invalid IFPkgRelocatedPath found in /Library/Receipts/GarageBandFactoryContent.pkg/Contents/Info.plist
    2009-01-26 21:22:41.515 GarageBand[7875:10b] Invalid IFPkgFlagDefaultLocation found in /Library/Receipts/GarageBandFactoryContent.pkg/Contents/Info.plist
    /Applications/GarageBand.app/Contents/MacOS/bomread: fork: Resource temporarily unavailable
    /Applications/GarageBand.app/Contents/MacOS/bomread: fork: Resource temporarily unavailable
    /Applications/GarageBand.app/Contents/MacOS/bomread: fork: Resource temporarily unavailable
    /Applications/GarageBand.app/Contents/MacOS/bomread: fork: Resource temporarily unavailable
    /Applications/GarageBand.app/Contents/MacOS/bomread: fork: Resource temporarily unavailable
    Please help~
    many thanks....

    Thz Christoph~
    i've tried this too~~~ still doesn't work...
    Actually, I've tried several other solutions like deleting pref files, application Cache, repair permissions...
    I have Office 2008 and Adobe CS3 Master Collection installed.
    Do u think they cause any problems? (like incompatible fonts.)
    also, i don't quite understand the error message:
    2009-01-26 21:22:41.514 GarageBand7875:10b Invalid IFPkgRelocatedPath found in /Library/Receipts/GarageBandFactoryContent.pkg/Contents/Info.plist
    2009-01-26 21:22:41.515 GarageBand7875:10b Invalid IFPkgFlagDefaultLocation found in /Library/Receipts/GarageBandFactoryContent.pkg/Contents/Info.plist
    /Applications/GarageBand.app/Contents/MacOS/bomread: fork: Resource temporarily unavailable
    is there any clue we can get from it?
    Many thz

  • HP Envy M4 won't start turn on

    My HP Envy M4 1115dx won't turn on.  It turns on but immediately turns off.  It will start up if the cover is closed, but once the laptop is opened, it turns off.  Cannot run diagnostics, do a hard rest, etc. since the computer will not turn on.  Operating system is windows 8.  Has anyone else had this problem?    

    Hello @reggie2014,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having issues with your HP TouchSmart IQ804 Desktop PC starting up. I am providing you with an HP Support document: Computer Does Not Start (Windows Vista), which will assist you in diagnosing the startup issue and resolving it.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Adobe Bridge won't start. Shows message: Adobe Bridge CC has stopped working

    Running Windows 8, with 16GB memory, running 64-bit Bridge. When I try to start Bridge it loads, shows main screen, then immediately shows dialog that says Adobe Bridge CC has stopped working. Only options are to debug or close program. I did Ctrl/Click and cleared the three resets and I also tried running it as admin.
    So far, I'm one for three with the Creative Suite. Installed PS on the above box, works fine, But can't install PS on my Mac--more than an hour with TS with no joy. And now can't launch CC on Windows.

    This problem has been solved by Microsoft, rebuilt Win7. I would like to delete my question to reduce clutter here but I don't know how to delete it. A moderator may delete this if they wish or someone can add to my reply and instruct me. Thanks!

  • IPhone 5 won't start up, shows that it's charging but won't turn on.

    I've had my iPhone 5 for a year and a half now and recently the battery has been having issues.
    Last night my phone reached 19% and turned off as if it had no charge left at all, and when I tried to plug the phone in to charge, the battery symbol showed up on the screen, but the phone still hadn't turned on. The phone has been left to charge overnight and it still won't turn on, I've tried holding the home and the power button at once for a few seconds but nothing works.

    Hold the POWER and HOME buttons until an Apple logo appears. If you have held them for 30 seconds and nothing has happened your phone has a hardware problem, possibly a failed battery. Note that Apple has a recall for certain iPhone 5's for defective batteries. See if yours qualifies: https://www.apple.com/support/iphone5-battery/

  • My Firefox out of the blue won't start and shows not responding when I left click.

    I have uninstalled and reinstalled with no luck. It still show it as not responding. I have a MAC system. I have searched and can't find a fix. Please help.
    == This happened ==
    Every time Firefox opened
    == out of the blue ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    This issue is probably caused by the Yahoo! Toolbar.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • My mackbook air won't start it shows the gray startup screen with a loading bar then just shuts down again how do I fix this?

    All it displays is the gray loading bar like it is updating then it gets a quarter of the way through at which point the wait circle appears and the computer shuts down. I need to get my computer working for college again anyone have any suggestions. I did the hardware test an it shows me a -1007D

    You probably have some type of hardware failure. The only people that can fix hardware failures are Apple or an authorized Apple repair center by replacing the part or parts that have failed. So you'll need to take the system into Apple to be diagnosed and repaired.

  • Mozila crashed suddenly and now it won't start. it shows white screen only. It won't let me reinstal it, sys shows that every .exe file is corruped.

    I was listeninig songs on youtube and mozila and whole sys just crushed. I recovered sys but after that mozila won't work. It lifts up just mozila frame and it just won't work. It won't let me reinstall it too. I downloaded about 10 instalations and for every it gaves me notification that file is corruped.
    I didnt uninstal it for not to lose all the bukmarks.
    Help me, what to do.

    Try this. It worked for a few users after a drop.
    Turn the iPad over and give it a very HARD slap on the back. May take several slaps.
     Cheers, Tom

  • Imac won't start up shows apple and then goes white screen.

    power off and on and restarted imac.  only white screen on 24 inch imac.

    See if any of the suggestions in this link help:
    http://support.apple.com/kb/TS2570

  • MBP won't start up past initial grey screen!!!

    My MBP just stopped starting up today. When I turn it on, it goes to the normal grey screen with the apple. Then, when it switches to the blue screen, it just gets frozen, and won't do anything. I don't know what to do. Any suggestions????

    DiskWarrior would probably fix it. Did you try to fsck it?
    1. Reboot/Startup holding your Command-S key down.
    2. At the command line type the following and hit 'Return.'
    /sbin/fsck -fy
    3. After it has check/repaired your disk, type 'reboot' and hit 'Return' again. Unit should bootup normally.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 

Maybe you are looking for