My hard drive is timing out with my airport extreme
I have an Airport Extreme Model A1345. Trying to connect my LaCie Rugged 500 GB HD and use it as a networked HD. But it keeps timing out. Are there only certain drives compatible with the Airport Extreme? Or do I need change a file share setting?
What firmware are you running?
All drives these days are designed to spin down.. not all setups are that smart spinning the drive up again.
And yes, there can be issues.. even though the LaCie is powered (i hope) you might still need a powered hub to overcome the very poor ability of the USB in the AE.
I would also tend to think running it on 7.5.2 firmware or 7.6.1 at the latest is prreferable to 7.6.4 but the only way to tell is try it.
Similar Messages
-
I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible
You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
http://support.apple.com/kb/PH1453 -
How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!
Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format. -
Problems getting an external hard drive to work on the new Airport Extreme
I have spent hours trying to get my 320GB external hard drive to work with the new airport extreme 802.11N. I have spent hours pouring over all of the posts here discussing possible solutions, all of which have not worked. This morning, however, I gave it another try and FINALLY, I have it working. I tried something simple. Here it is:
Using the Apple Disk Utility Program, I formated my drive using the MS-DOS mode, called my Hard drive "ItunesHD". It took about 20 minutes to complete (i'm assuming because of the size of the drive). I then unplugged the router and hard drive, turned on the hard drive, then the router. After my macbook pro reconnected, I clicked on the iDisk utility icon in my menu bar, provided my password and FINALLY saw the network drive icon on my desktop!!! It seems that formatting my drive using MS-DOS compatibility mode finally worked for me. I'm not saying this will work for anyone else who is having this problem, but you can at least try it. I tried all of the MAC formatting options and have had no luck.
What I would like to know now is (..if anyone has these answers, please let me know):
1. What is the maximum SINGLE drive capacity that this router will understand...500GB, 1TB, 2TB? I would like to get the biggest bang for my buck.
2. Keeping #1 one in mind, I purchased an Apple TV (still waiting on it to arrive) and I would like to know if it will read multiple hard drives connected to the Airport Extreme router (...say (2) 500GB hard drives). I know you can have multiple libraries in iTunes (which to me is a cheesy solutions, there should be an option in the preferences that would allow you to save your music in one place and your movies in another). Anybody have any idea on this one?
I basically want to rip all of my dvd movies on a big hard drive connected to my airport extreme to use with my AppleTV , so I just need to find out about the maximum size and hooking up more than one hard drive and getting the AppleTV to recognize them all.
thnks
MacBook Pro Core Duo Mac OS X (10.4.8)Sorry you had so much trouble hooking up a hard drive to the base station. I've done some experimenting with the feature and this is what I've found out.
You can use either the native Mac format, Mac OS Extended, or the Microsoft format known as FAT. Apple calls FAT, MS-DOS File System in Disk Utility.
If you use Mac OS Extended, the Macs on the network will be able to connect to the drive using the native AFP (Apple File Protocol) or the Microsoft native SMB (Server Message Block) protocol. PCs will only use the SMB protocol of course.
If you use MS-DOS File System both the Macs and the PCs will only use SMB to connect to the drive over the network.
Basically I've found everything works as expected with regard to volumes connected to a network.
One thing I don't have installed is the iDisk Utility. I'm wondering if it may be the cause of the problems you were having. But reading through your post it may also be the difference between expected behaviour and the proper procedure for discovering and mounting network volumes. Let me explain.
You only mention having trouble getting the drive to show up on your Desktop, you didn't describe how you went about discovering the network drive. It isn't just suppose to show up on your desktop when you plug it in to the Extreme base station. It doesn't work like the iDisk or disks connected directly to your computer using USB/Firewire.
Normally with network drives you're suppose to either browse for them using the Network icon in the Finder or using the Connect to Server command in the Finder's Go menu, you would type the address in directly for the network volume you want to mount. Try it and see what happens.
Now to answer your other questions.
I don't have a volume large enough to hit any limits the base station may have but I did read a post about someone who said they had a 1.5 TB volume connected and could only see 1 TB of it. They were forced to partition the drive to see all available space and of course the volumes showed up as two separate drives. One thing wasn't made clear though. They didn't say what volume format they were using to format the drive, Mac OS Extended or MS-DOS.
Everything having to do with the AppleTV is just speculation at this point since no one has one yet but from what has been demonstrated so far, AppleTV relies on iTunes. In other words, it won't pull data from network volumes on its own, a computer running iTunes needs to feed it. -
External Hard Diver Fromatting Preventing use with USB Airport Extreme ?
I am putting together a network with my new MacBook and Airport Extreme and old XP Windows desktop and Seagate USB external hard dive. The drive is not recognized over the network from the Mac, butis available when the USB is plugged directly into the Mac. I called apple support and was told that this is because the Seagate drive is Windows NT formatted which is not recognized by the Airport Extreme, and that I will have to reformat the drive to a DOS or Mac format for this to work. I just want to see if anyone has any other ideas before reformating. Thanks.
If you ever plan to read the drive directly plugged into the PC, you'll need to format it FAT/FAT32. If you ever plan to use it for Time Machine it needs to be formatted HFS+. You can re-format later (data removed) if you wish.
-
Where did my USB hard drive that's attached to my Airport Extreme router go
I have a USB hard drive attached to my Airport Extreme. I upgraded to OS X.5 and the drive disappeared. If I reboot to OS X.4.10 the drive reappears.
Does Leopard recognize USB drives connected to Airport routers? How can I get Leopard to recognize this drive?Hello.
When you setup up your Airport you give a name and password to the base station. The base station name will show up in a Finder Window. My Finder window shows it between Devices and Places in an item called Shared.
When you click in your base station name it will refresh the window content and show a folder with the name of your HD connected to the Base Station. On the top part of the window you will see a dark gray bar and the status +*Connected as: Guest*+ and a button Connect As... . Click this button and select *Registered User* and *type your password* for the Base Station. If you wish you can select the *Remember this password in my keychain*. Now click Connect. You will see that the status in the dark gray bar shows +*Connected as: <your user name>*+.
Now remember that this HD is not a normal HD to Leopard, it is a Network HD, so it wisely shows it in the Shared item.
Now Apple understands that in the past this Network HD was shown to users as a Normal HD on the Desktop and this could generate some confusion, so they left a way for us to see it as in Tiger.
Click on the Desktop and you will the Finder menu bar, select Finder>Preferences and click on the item +*Connected servers*+ in the Show this items on the Desktop. This will do the trick. -
How Do I Access a hard drive that is hooked up through airport extreme
Hello - I am curious how I perform the following activities while being on my mac and need help.
- I have an airport extreme station setup on my main computer which is a PC and on that airport extreme I have plugged in a USB hard drive. I want the mac I am on to access the PC's hard drive via airport extreme.
- How do I get my mac to recognize files and folders on my windows machine?
Thanks
DaveIf the drive is hooked up to an 802.11n AirPort Extreme or Time Capsule, click here and follow the instructions. If it's hooked up to a different AirPort base station, you can't.
To access the PC's internal drive, click here and use the file sharing instructions. If there's no document for Mac OS X 10.5 and that Windows version, use the one for 10.4 instead.
(46582) -
How do I access an external hard drive that is plugged into an AirPort Extreme
I have an external hard drive connected to my AirPort Extreme and I wanted to know how to access the photos and videos on it while using an iPhone or iPad while connected to the network. When I go to the airport utility app on my phone or iPad I can see the drive listed under file sharing and disks so I know it's connected. Any help would be greatly appreciated. Thanks
You will need an App like Filebrowser to do what you want. More details here:
Stratospherix - FileBrowser - Overview -
I can not see my external hard drive that is hooked to my airport extreme
I have hooked my iOmega 1tb hard drive to my airport extreme but can not see it on my macbook pro. need help to set this up
This is unsupported by Apple. You must configure Airport Utility to turn enable File Sharing of the drive in Sharing preferences and in the AEBS configuration. Then you have to "mount" the drive on your Desktop by selecting Connect To Server from the Finder's Go menu.
-
Hi I am trying to set up our house to be fully networked. We have an airport extreame the network is up and running all the Apple TVs can show photos and music from the ipads and iphones. I can't reach to the external heard drives with the apple tv is it possible to do this? How??
We can't see the printer I connected to the Airport either will it work if I am running it through a hub instead of as the only connection to that USB port?
Thanks in advance for any assistance.
BruceWelcome tot he Apple Support Communities
The Apple TV can only get data from the iTunes library and the iTunes Store, so you can't use an external hard disk with it.
Where are you trying to see the connected printer? -
Can i use time machine with a airport extreme and a external hard drive
I have connected a hard drive to my airport extreme.
Now i would like to use time machine to back up my computers, and would like to do this on the hard drive which is connected to my airport extreme.
Next step is that i would like to be able to approach my external hard drive via the internet.
Is this possible or not?Both are possible. However, Apple does NOT support Time Machine backups to AirPort Disks attached to the 802.11n AirPort Extreme Base Station (AEBSn). Doing so will potentially lead to data corruption and is highly not recommended. Please check out this excellent Pondini article for more details. This article also provides the Apple Support references that states Apple's position. Bottom line? If your backups are critical to you, then you may want to rethink your backup solution.
As far as accessing the AirPort Disk from the Internet, the following is the basic steps to do so:
Start the AirPort Utility > Select the AEBSn, and then, note the IP address shown.
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Disks, and then, select File Sharing.
Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
Verify that Secure Shared Disks = With a disk password. (Recommended)
Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
Click on Update.
To connect to the shared AirPort Disk from a remote location using a Mac:
From the Finder > Go > Connect to Server.
Enter the Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
Click Connect.
You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
Click Connect. -
Hard drive is running out of space!! HELP!!
I just purchased a new macbook pro with retina 4 days ago. I've noticed that the hard drive is almost out of space already. I removed all pics and music to external drive and still have "backups and other" that are taking up 75% of HD. How do I clean up these files? Thanks!!
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below on this page to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
I had all my iTunes music backed up onto a hard drive; but the hard drive was stolen along with all the files I backed up onto it. However, the songs I had in iTunes still show up (I just can't play them.) If I were to use iCloud, would it still take those songs and let me listen to them (and maybe re-download them?) Or am I out of luck?
Open iTunes, go to the iTunes Store, and then go to Purchased on the right hand side under Music Quick Links.
You can re-download all the songs, apps, or books you have previously purchased.
I'm not sure if this is a requirement, but just in case, make sure you download the latest version of iTunes (v10.3) too. -
working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?
Well first you have to figure out what is wrong with the machine and solve that problem first.
Your post is very vague on what occured, and there are many types of "crashes" it really depends upon what see on the screen and what the hardware does, we can't see it to tell you, so you have to tell us.
I suggest you run through these user tips and provide more information about your hardware.
Disconnect the TimeMachine drive for now
..Step by Step to fix your Mac
Help us to help you on these forums
Create a data recovery/undelete external boot drive
If this is going way over your head, there are local PC/Mac techs that will assist you for a fee, Apple only does hardware repairs and is advised to use them if you discover it is, especially if under warranty/AppleCare.
Hard drive and RAM upgrades can be handled yourself or by a outside tech in many older models of Mac, but don't expect Apple to cover the new parts.
Install/upgrade RAM or storage drive in Mac's -
I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Maybe you are looking for
-
Error in export phase of a PI system copy
Hi, In a PI (netweaver 04s) system copy, I was faced with an error message in log, where retry is not possible, as shown bellow: Caught exception while getting information about SDAs and SCAs Throwable: com.sap.sdm.util.sduread.IllFormattedSduManifes
-
Warning messages in schema "log".
Hello all. I am creating a payroll function, in order to do some additional validations, and issue some messages, in the schema "log". When i want to issue an error message, that stops any kind of furter processing, everything is working fine. Howeve
-
What should I do? Will I lose all my music?
-
Payment due date was changed without notice
I received a text message on 7/9/15 advising me my bill would be due on 7/23/15 rather than 8/1/15. A text message is really not an appropriate form of notification first of all. If I'm 2 days late you charge me a late fee, yet my billing cycle can
-
Questions about "Diff Sequence File With..." function
Hello, I've started working on a project where I'm maintaining a piece of older code written by a since-departed employee of my company. It's a TestStand 3.0 sequence file calling on Labview 7.0 code. The thing is, there were two of these installati