My HP 8540w is creating static for my headphones when ever i plug them in!

when ever i plug my headphones into the jack it always starts creating static and my headphones work fine i tested them on 3 other diffrent laptops. But when ever i use them on my laptop it starts getting all buzzey and i can't stand it anymore.

Hello CharliePurvis,
Welcome to the HP Forums!
I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
Thanks and have a great day!
Mario
I worked on behalf of HP.

Similar Messages

  • Please Help! For some reason when ever I type in PSE it comes out very faint and almost invisable???

    Please Help! For some reason when ever I type in PSE 10 it comes out very faint and almost invisable like. I'm not sure what I did but I cant get it back to the normal black font??? Please help. I know this seems like a very simple and easy question. I could use any advise. I've tried everything.

    Further to what dominic said, in PSE 11 and 12, you get to Reset Tool by clicking the four-lined square on the upper right of the Tool Options area. In older versions, click the tiny triangle or tool icon at the far left of the Options Bar.

  • Can't create object for multi instance when using GetObject("myconfig1")

    Hello,
    I have the Indesign Server CS6 Multi Instance. I create an instance using the InDesign Server Windows Service:
    Port: 12000
    Args: -configuration myconfig1
    Now I tried in Visual Basic: GetObject("myconfig1")
    Then I get a can't create ActiveX component exception.
    Notes:
    The service "InDesignServerService x64" is running.
    The InDesign Server instance was started.
    I can access the instance via SOAP: http://localhost:12000/
    Why can I not create the object in Visual Basic?
    Thank you for help!
    Harald

    I found that you need to create the object if it does not already exist, to I implemented that with a try catch, try to get it and if you can't then create it. when you start it I also found it was slow so I have to put a pause in to wait for it. The below code should hopefully be enough to help.
      Private Sub AttachToInstance(ObjectName As String, InDesignAppPath As String, ByRef Restarted As Boolean)
            Try
                oInDesign = GetObject(ObjectName)
            Catch ex As Exception ' instance not running, start it
                Restarted = True
                StartInDesignInstance(ObjectName, InDesignAppPath)
                Threading.Thread.Sleep(5000)
                oInDesign = GetObject(ObjectName)
            End Try
        End Sub
        Private Sub StartInDesignInstance(ObjectName As String, InDesignAppPath As String)
            Dim ProcessProperties As New ProcessStartInfo
            ProcessProperties.FileName = "InDesignServer"
            ProcessProperties.Arguments = "-configuration " & ObjectName
            ProcessProperties.CreateNoWindow = True
            ProcessProperties.WorkingDirectory = InDesignAppPath
            Dim myProcess As Process = Process.Start(ProcessProperties)
        End Sub

  • Created playlist not showing up when iPhone is plugged in

    I'm using an iPhone 5s on iOS 8.1.2. I have created music playlists on my phone but when its plugged in they would not show up on the sidebar. My library shows up fine but when i try to look for my playlists they aren't there!!! Any help would me much appreciated.

    Hi Michelle-
    iTunes is not compatible with XP's Fast User Switching feature, which allows more than one person to be logged into the computer at the same time.
    You can disable this by going to Start/Control Panel/User Accounts then 'Change the way users log on and off' and remove the checkmark from Fast User Switching.

  • IPhone 4 is alerting me to an accessory not meant for the device when it isnt plugged into anything, how can i fix this from happening?

    it alerts me both when its awake and asleep at random intervals, ive tried eveything i can think of including restoring the factory settings and still it keeps happening. what can i do to fix this. also when i recieve a text message with the phone on vibrate, it vibrates twice with the first being short and the second being long. please help with either issure or both if possible

    Clean the dock connector and inspect it to ensure no pins are bent to resolve the "Device not supported" message.
    For the text messages: Settings > Messages > Play alert tones, set it the way you want it.

  • Why can i not download apps it keeps asking for payment details when apple already have them

    somebody please help its driving me nuts, ive downloaded other apps before, its just suddenly stopped working for some strange reason, ive tried changing my bank details but that didnt work either, somebody help before i end up smashing my beloved phone

    Itunes support recently updated their account security so that your billing address in your account must match the billing address of the credit card you are using, as well as how it appears in the USPS database (
    http://zip4.usps.com/). Try making sure your address matches exactly and it should allow you to use your account.

  • For some reason, when ever I click on a link to go to another page in an existing page like facebook or YouTube, I'm taken back to my main startup home page

    I cant navigate inside firefox.... this page here has been the only place that my mouse will take me to any new page... when I try to go to different links inside any of my normal sites, like facebook or youtube, if I click on any link inside them I am taken back to my main home page.... I also can not single click open any of the icons next to the firefox name at the top left of my screen, history, bookmarks, tools, none of those work unless I hold my mouse button down and then scroll down to what I need... I have cleaned my mouse, and it works fine on my husbands comp, and works fine offline on mine... it is only in firefox that I seem to be having a problem... what can I do?

    If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
    Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I am creating box for two coloums in sap script

    hi,
    i am creating box for two coloums
    when i am creating box for this two coloums this box is displaying from the top.
    when i am decreasing this hight it is decreasing from the buttom of the window
    i want to decrease from the top of window
    can u explan plz
    this requirement
    plzz

    see this:
    BOX Command
    Syntax
    /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
    Effect: draws a box of the specified size at the specified position.
    Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
    XPOS, YPOS
    Upper left corner of the box, relative to the values of the POSITION command.
    Default: Values specified in the POSITION command.
    The following calculation is performed internally to determine the absolute output position of a box on the page:
    X(abs) = XORIGIN + XPOS
    Y(abs) = YORIGIN + YPOS
    WIDTH
    Width of the box. Default: WIDTH value of the SIZE command.
    HEIGHT
    Height of the box. Default: HEIGHT value of the SIZE command.
    FRAME
    Thickness of frame.
    Default: 0 (no frame).
    INTENSITY
    Grayscale of box contents as %.
    Default: 100 (full black)
    Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
    Units of measurement: The following units of measurement may be used:
    TW (twip)
    PT (point)
    IN (inch)
    MM (millimeter)
    CM (centimeter)
    LN (line)
    CH (character).
    The following conversion factors apply:
    1 TW = 1/20 PT
    1 PT = 1/72 IN
    1 IN = 2.54 CM
    1 CM = 10 MM
    1 CH = height of a character relative to the CPI specification in the form header
    1 LN = height of a line relative to the LPI specification in the form header
    /: BOX FRAME 10 TW
    Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
    /: BOX INTENSITY 10
    Fills the window background with shading having a gray scale of 10 %.
    /: BOX HEIGHT 0 TW FRAME 10 TW
    Draws a horizontal line across the complete top edge of the window.
    /: BOX WIDTH 0 TW FRAME 10 TW
    Draws a vertical line along the complete height of the left hand edge of the window.
    /: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
    /: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
    POSITION Command
    Syntax
    /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
    Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
    Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
    XORIGIN, YORIGIN
    Origin of the coordinate system.
    WINDOW
    Sets the values for the left and upper edges to match those of the current window (default setting).
    PAGE
    Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
    /: POSITION WINDOW
    Sets the origin for the coordinate system to the upper left corner of the window.
    /: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
    Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
    /: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
    Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
    Pre-Setting BOX Position Arguments
    You can use the POSITION and SIZE commands to preset some arguments in the BOX command. POSITION presets the start point (upper left corner) of a box or line. SIZE specifies the width and height of a box.
    You can use POSITION and SIZE to preset arguments, but you can also set the start point and size arguments of a box or line directly in the BOX command.
    By default, if no positioning is specified, the upper left corner of a box or halftone or the top of a line is aligned with current SAPscript window. That is, the upper left corner of the box, halftone, or line starts at the upper left corner of the current window in the active form. By default, the height and width of a box are set to the height and width of the current window.
    Use POSITION and SIZE to preset the arguments in a BOX command in the following situations:
    The BOX command exceeds the 132-character (1 line in SAPscript) length limitation if you specify all arguments directly in the command. You may exceed this length limit if, for example, you use symbols in a command.
    By pre-setting arguments with POSITION and SIZE, you can work around the limitation on the length of a command. You do not need to specify the preset arguments in the BOX command.
    You want to use the enhanced capabilities of POSITION for adjusting the starting point of a box or line.
    With BOX, you can specify an offset for the starting point only as a whole number (non-negative integer). This command would print a box starting 1 CM to the right and 1 CM down from the left upper corner of a window:
    /: BOX XPOS '1' CM YPOS '1' CM
    With POSITION; you can adjust the position of a line or box relative to a window much more precisely. In the POSITION command, you can specify positive and negative offsets and use non-integer numbers.
    Example: The commands shown below position a box slightly to the left and slightly above a window. This leaves a margin between the edge of the box and the text in the window.
    /: POSITION XORIGIN '-.2' CM YORIGIN '-.2' CM
    /: SIZE WIDTH '.2' CM HEIGHT '.2' CM
    /: BOX FRAME 10 TW
    (Note that the box must be enlarged to accommodate the shift. If it is not enlarged, then it will not cover all of the window.)
    You can also use POSITION to set the starting point to the upper left corner of the active page format. Example: POSITION PAGE moves the starting point from the active window to the active page format.
    You want to use the relative sizing capabilities of SIZE to adjust the size of a box, line, or halftone.
    With BOX, you can make only absolute size specifications. BOX HEIGHT, for example, overrides the default height setting to the height of the current window.
    With SIZE, you can adjust the size of a box or a line with respect to its previously-set dimensions. The following commands would, for example, draw a frame 1 CM in from the margins of the paper:
    /: POSITION PAGE
    /: POSITION XORIGIN 1 CM YORIGIN 1 CM
    /: SIZE PAGE
    /: SIZE HEIGHT '-2' CM WIDTH '-2' CM
    REWARD IF HELPFUL

  • VL10B - Creates delivery for STO after delivery date

    Hi All,
    VL10B batch job is scheduled to create delivery for STO automatically when stock is available (availability check 02).
    batch job creates late delivery though sufficient stock exist
    For ex. STO is created on 27 Aug 14 having delivery date 31 Aug 14. (STO is having only one line)
    VL10B batch job having delivery date as <= current date + 1.
    logically batch job should create delivery on 30 Aug 14 but in my case it is created on 07 Sep 14.
    Please help me to understand the cause of this.
    Appreciate quick response
    Regards,
    Anil Patel

    Hi Anil
    See note
    1245447 - Avail. check for deliveries that are created automatically
    "After you implement the corrections, the availability check is only deactivated when you create the delivery automatically. If you make changes to the delivery afterwards, the system runs the availability check.
    The availability check is deactivated for the automatic creation of deliveries for technical reasons."

  • POV-After creating Tcode for a table SM30 I want F4 Help here

    Hi All,
    After creating Tcode for a table, When I am trying to give table entries thro' this Tcode, I want F4 help for those fields. Apart form assigning "Fixed values" in Domain level how can I achieve this.
    Points Assured.
    Regards,
    Suresh

    Hi,
          You need to create search helps based on this table for each filed or one for all the fields with proper import and export paramters. Or else you can give check table entries for each of the table fields for which you need the F4 help. Check table us assigned to a field using the Foriegn key assignment.
    Best Regards,
    Sesh

  • What are the mapfiles for and when should I use them?

    Hi,
    what are the map files for and why/when should I use them?
    /usr/lib/ld/map.noexstk
    usr/lib/ld/map.noexbss
    /usr/lib/ld/map.noexdata
    /usr/lib/ld/map.pagealign

    Hi, I'm sure you've read the comments, but for the benefit of those who haven't: /usr/lib/ld/map.noexstk # Linker mapfile to create a non-executable stack definition within an # executable. /usr/lib/ld/map.noexbss # Link-editor mapfile to create a non-executable bss segment definition # within an executable. /usr/lib/ld/map.noexdata # Link-editor mapfile to create a non-executable data segment definition # within an executable. These stop the various segments from being executable. Which could reduce the risk surface for exploiting security holes in an application. /usr/lib/ld/map.pagealign # Linker mapfile to create page-aligned data within an executable. Aligning the start of the data segment can reduce the number of TLB entries needed to map the data. So the smallest TLB page size is 8KB, then we have 64KB, then 4MB etc. If the data starts on a 4MB boundary then it can be mapped with 4MB pages, if not then it has to be mapped with 8KB pages until a 64KB boundary, then 64KB pages until we get to a 4MB boundary. You sometimes get a bit of performance from this, but you may also get performance stability from it. If the mapping is random sometimes it works well, sometimes it works less well. Regards, Darryl.

  • I am using Windiws 7, when ever I go to my outlook 2010 email I am constantly asked by iCloud for my password it is driving me crazy how do I fix it please.

    How do I stop iCloud from constantly  asking for my password when ever I open Outlook 2010 on my Windows 7

    Dear Mr. Toad (my all-time favorite ride at Disneyland ;-) ..
    Thanks so much for your detailed reply.. my netbook is in the bedroom, turned off.. I (so far) only use it in the evening, in the bedroom.. I've saved your response, and will try your suggestions, and let you know if they solve the problem I described. I really appreciate you taking the time to post such a detailed reply..
    I can't answer your Thunderbird "configuration" questions, because I'm in the living room, using the crap Vista laptop, on which I plan to install Thunderbird, and then take Windoze Mail out in the street and drive over it a few times.. I'll get back to you one way or the other, and let you know if your instructions solved the problem, or not..
    I don't understand why Thunderbird "out of the box", so to speak, simply doesn't forward HTML emails with embedded graphics, (like Outlook Excess, and Winblows Mail do).. without having to go through those steps. I personally HATE HTML email, but over the years, it's become more and more prevelant.. so it's a problem I must fix..
    Thanks again..
    Harv..

  • Should I create setters for static fields ?

    Hi all,
    I don't know if here is the right forum for this question, but I'd like to know if is recommended to create setters for static fields of a class or if I can directly assign a value to those fields.
    Thanks.

    No question, you can assign to static fields, it's more a question of style and thoughts about future requirements. At some point in the future maybe you'll want such setting to have side effects. Personally I think using getters and setters everywhere (even on isntance fields) can be a bit obsessive.
    On the whole, there's not that many occasions where accessing static fields that directly from outside the class makes sense. It's usually better, to my mind, to use a singleton pattern for global values. For me, static variables are more likely to either be constants, or things like instance lists more likely to be accessed through an Iterable interface.

  • How to create buttons for each slide in slideshow

    I currently have a slideshow working with prev and next buttons,
    but would like to add numbered buttons for each slide at bottom of images,
    with a static number for the active slide that has a colored circle around that number.
    I can create static number with colored circle in Photoshop and add that to a layer,
    but it's labor intensive to do that for all numbers.
    Is there a better way to create the highlighted numbers for active slide?
    For numbered buttons that link to non-active slides, I can create numbers in Photoshop and import images into Flash,
    then convert to symbols and assign actions for them,
    But that too is labor intensive to do for all the numbers.
    Is there a better way to create numbered buttons for non-active slides?
    I'd also like to have a hover function on the numbered buttons,
    that changes from plain image of number to number with colored circle like I want to use for active slide.
    How do I assign a hover function to button symbol, that will load another image or symbol?

    Try to think in terms of having reusable symbols.  Think it thru before you try it.
    Use a movieclip symbol instead of a button.  Have a dynamic textfield in that movieclip for the number, and set the textfield to not be selectable.  Have one frame of this movieclip where it displays as the highlighted (selected) one and have the movieclip go there where you are on that slide.
    Use the textfield for the number--assign it dynamically so that you don't have to import an image for it.  Use as many of these movieclips as you need to for all your buttons.
    Have functions that reset all the buttons at once so that when you move to a new slide, the previously selected one goes back to mormal... follow that with setting the newly selected one to be in its "selected" frame.

  • Error creating GUI for dmardemo.java

    Hi friends!
    I took the demo dmardemo.java (Association Rules) which comes with the ODM for Java to test Data Mining function in the sample database Sales History. In the original code, the application ran normally. However, I'm trying to create a GUI to execute the most important funcionalities like creating view, preparing and building model and restoring rules and itemsets. I created a visual class in the same project where the demo is. I've done some changes in the methods, like putting some input parameters for them. e.g.:
    [i]public static void buildModel(String viewModelo, String configTask, String modelName, String taskName) throws JDMException
    Connecting is ok. However I can not create the view.. When I execute this method for creating the view, some erros occurs, like:
    Create build data view...
    java.sql.SQLException: Closed Connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
         at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:840)
         at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:759)
         at project1.dmardemo.createBuildData(dmardemo.java:277)
         at project1.Principal.jMenuItem1ActionPerformed(Principal.java:181)
         at project1.Principal$7.actionPerformed(Principal.java:110)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1170)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1211)
         at java.awt.Component.processMouseEvent(Component.java:6038)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3260)
         at java.awt.Component.processEvent(Component.java:5803)
         at java.awt.Container.processEvent(Container.java:2058)
         at java.awt.Component.dispatchEventImpl(Component.java:4410)
         at java.awt.Container.dispatchEventImpl(Container.java:2116)
         at java.awt.Component.dispatchEvent(Component.java:4240)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
         at java.awt.Container.dispatchEventImpl(Container.java:2102)
         at java.awt.Window.dispatchEventImpl(Window.java:2429)
         at java.awt.Component.dispatchEvent(Component.java:4240)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
    What could be happening?
    Thanks!!
    Regards
    Luis

    I have to tell you that the problem was occurring because of the clean() method. It must clean all views created before, and I was ignoring its execution. Now, another thing is happening: every time I made a call for it, an exception occurs, telling me that I must pass an input parameter for this method, and a null value for the objectName is not allowed.
    However, this method doesn't work with any parameters.
    What could be happening?
    Thanks a lot!
    Luis

Maybe you are looking for