My hp printer is not typing refer to printer documents 0*61011bed

my hp printer is not typing refer to printer documents 0*61011bed
printer type E709 a series

Hello @amalsh64,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the 0x61011bed error message that you're getting on the front panel of your HP Officejet 6500A e-All-in-One Printer. However, I do need to confirm exactly what error message that you're getting on the front of your printer as there are a few different 0x61011bed error messages.
Are you also seeing 'Problem with Printhead,' 'Printer Failure,' or 'Ink System Failure' with the 0x61011bed error message?
If you're getting one of the messages listed above with the 0x error code than please click here for troubleshooting. Once the support document opens please click the dropdown for 'Any other error code' and run through the Solutions to resolve this error.
If you're just getting the 0x61011bed error code with no other messages please click here for the troubleshooting reset.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

Using a strongly typed ref cursor doesn't enforce data type

I am trying to enforce the datatypes of the fields coming back from an oracle reference cursor by making it strongly typed. However, there seems to be no warning at compile time on the oracle side or exception in ODP.NET if the datatype coming back in the cursor does not match. For example here is my cursor and proc
create or replace
PACKAGE THIRDPARTY AS
type pricing_record is record
BaseIndexRate     number(6,5),
BaseIndexRateType     VARCHAR2(1 BYTE)
type cur_pricing2 IS ref CURSOR return pricing_record;
PROCEDURE getpricingbyappidtest(appid IN application.intid%TYPE, pricing OUT cur_pricing2);
END THIRDPARTY;
create or replace
PACKAGE BODY THIRDPARTY AS
PROCEDURE getpricingbyappidtest(appid IN application.appid%TYPE, pricing OUT cur_pricing2)
AS
BEGIN
     OPEN pricing FOR
     SELECT      somevarcharfield, someothervarcharfield
FROM application
WHERE A.appid = appid;
END getpricingbyappidtest;
I would expect this wouldn't compile since i am putting a varchar into a number field. But it does. Also if i check the datatype in the reader on the .net side it also is a string. So odp doesn't seem to care what type the cursor is
here is that code and output
var schemaTable = reader.GetSchemaTable();
using (var file = new System.IO.StreamWriter("c:\\_DefinitionMap_" + cursorName + ".txt"))
file.WriteLine("COLUMN" + "\t" + "DATATYPE");
foreach (DataRow myField in schemaTable.Rows)
file.WriteLine(myField["ColumnName"] + "\t" + myField["DataType"]);
COLUMN     DATATYPE
BaseIndexRate     System.String
BaseIndexRateType     System.String
Does anyone have an approach for enforcing datatypes in a ref cursor? Am I doing something wrong when defining the ref cursor?

Hello,
By using a ref cursor you are really using a pointer to a cursor. There is no way I know of to make a compile check of the cursor check unless you want to create a SQL type and cast the cursor to this type and even this wouldn't work in all cases. For instance, I could have function call within my cursor select which could return a varchar (with a number always in the varchar) which would be horribly sloppy but legal and you would expect Oracle to compile it.
If you are worried about this I would suggest not using ref cursors and go to UDT instead, where there will be more checking (because of a C# equivalence generated object). Oh and BTW, yes the cursor will throw an exception if the data is incorrect, but only at runtime - just like normal Oracle PLSQL.
Cheers
Rob.
http://www.scnet.com.au

Return csv string as strongly typed ref cursor

I have a column in a table that is csv delimited and I want to return it (and others) as a strongly typed ref cursor.
eg
create table test_tab (mydata varchar2(100))
insert into test_tab(mydata) values ('"a1","b1","c1","d1"')
insert into test_tab(mydata) values ('"a2","b2","c2","d2"')
so test_tab has 1 column and 2 rows:
"a1","b1","c1","d1"
"a2","b2","c2","d2"
So a,b,c,d represent columns in my strongly typed ref cursor
If I then try something like:
declare
type my_rec is record(
a varchar2(50),
b varchar2(50),
c varchar2(50),
d varchar2(50)
type my_rec_refc IS REF CURSOR RETURN my_rec;
my_test_refc my_rec_refc;
begin
open my_test_refc for select mydata,mydata,mydata,mydata from test_tab;
end;
then it obviously works as my ref cursor is expecting 4 columns. However, what I want to do is break each individual element out of the mydata column. I've played around a bit with dynamic sql but only getting so far and apparently that can't be used with a ref cursor anyway. I need to return a strongly typed cursor as another program requires this.
One option is to manually parse each row and insert into temp table that is basically definition of record (so record type no longer needed) and this becomes type of ref cursor. I can then simply select from the table. I'm not keen on this as it's just another object to worry about.
Another option is to do some ugly instr/substr to extract each element in the sql statement (or write a function to do it but need to consider performance of this). The more generic the better as I need to reuse against multiple strongly typed ref cursors (kind of a contradiction in that by virtue of using strongly typed cursors I know exactly what I want returned!).
Another option is for someone to shed some light on this as it must be possible to do in a simple way along the same lines I have started?
thanks in advance

That documentation seems to stay pretty vague. What constitutes the "right set of columns". Obviously my observed result matches what you are saying about not being able to enforce the datatypes in the fields of the strong typed cursor. But then I don't see the point of the strong typed cursor otherwise. Other sites i have read seem to focus on the %rowtype return rather than mapping it to a record. But the general consensus (at least to my understanding) is that if the cursor is strongly typed then the sql statement that used to open it must have the same set of columns and the datatypes must at least be able to implicitly convert.
I will try the %rowtype strong ref cursor against a table and see if there is a different result. I am mainly interested in this because I would like to beable to ensure the datatype returned on the .net side through ODP
I want to be able to know the datatype of a field coming back through a ref cursor at compile time not runtime. So it the answer to cast every field of the select statement?

InfoObject ZPRODGRP does not fulfill ref. integrity in record 39435 in valu

Hi Gurus,
There is a query which is related to master data. While updating the infocube we are getting the error InfoObject ZPRODGRP does not fulfill ref. integrity in record 39435 in value 58240, we have maintained the ref. integrity value 58240 in BW but still getting the same error message.
Please help me out in this issue.

Hi Bhanu Gupta,
I have checked it in the SID Table of Product Group /BIC/SZPRODGRP it exists in the SID table, but when i try to look into the CUBE with the particular product group it says that it does not exist with that value.
I have seen many of your replies which are quite knowledgeble.
Please advise me soon what is to be done.

I need to able to print a pdf that is locked. It has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document. Is there a way to do this?

The PDF has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document. Is there a way to do this? HELP!

Sorry I thought was just a one off, it would be no use for large volumes.
Do you not have this avaiable in the print menu in Preview with these documents?
I have also found a link on the Adobe web site that discusses that this facilty is enabled by the creater of the PDF.
http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd61510979419 5ff-7e0d.w.html
If you do a web search there are various claims on how to save a protected PDF, I have'nt a way to test the proceedures. I would want a copy of any forms that I sent off, not sure why they protect them in this way, there must be a reason.

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. Now the cursor moves but cannot select anything. Suggestions?

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. When opening up a browser or application, the cursor moves but cannot select anything. Suggestions?

Maybe something in these Apple support articles will help.
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond
Keyboard/Mouse – Troubleshooting Wireless

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

Hello,
Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
Regards,
Nakul

Word styles not appearing in Print Document Appearance dialog

My custom list styles in Style Mapping.dot are not appearing in the Print Document Appearance dialog when I try to map CSS styles to Word styles.
The styles do appear in the template when I open it in Word. They appear in the styles task pane whether I select "In current document" or "In use" in the Style Pane Options dialog in Word. The styles have the same name (such as "Bullet" or "Number") in Word as the CSS styles in RoboHelp.
I tried saving Style Mapping.dot as .dotx, thinking that RoboHelp 8 might work better with the current template type, but no help. I tried adding the template to the same folder as the Normal.dotm template is in and opening it there. No improvement.
Oddly, the built-in Word styles List, List 2, & etc and List Continue and its series appear in the Robo dialog, but the styles List Bullet and others in that series do not appear.
I suppose I could modify the list styles that do appear in Robo and map them to my CSS list styles, but that feels a bit like a desperate kluge.
Does anyone know what might be wrong, either with my Word template or with Robo, that might be causing what seem to be perfectly good Word styles to not present themselves for mapping?
Thanks again,
John

Peter,
I think your discussion of this problem could explain the situation and propose a workaround more simply than it does.
Based on your article, I assumed that Robo displays only the built in Word list styles such as List and List Continue (since those were the only styles showing up in the style mapping dialog and since your example shows matching a Robo style named List Mapping to a Word built in style named List). I assumed I would have to match my Bullet style to a style named List in Word, and match the indented bullet style to List 2, and so on. The actual situation is that Robo, for some godforsaken reason that only idiots would understand, will not show a Word style if any numbering (bullets or numbers) is applied to it. That is, one does not have to avoid a class of styles called “List styles”, one only has to avoid applying numbering to the styles until later.
Thus the workaround is to create the word styles (with names that match the Robo styles!) that contain every attribute you need EXCEPT the numbering. That is, I can link Bullet to Bullet and Number to Number and Indented Number to Indented Number, and so on and on, as long as I have all the Word styles in the template with their numbering set to None.
Then after I generate the document, I can modify the styles to add the appropriate numbering, and voila!
Currently scrolling the doc & modifying styles. Might be a glimpse of daylight.
John
From: Peter Grainge [email protected]
Sent: Thursday, October 13, 2011 8:47 AM
To: John Dawson
Subject: Word styles not appearing in Print Document Appearance dialog
Re: Word styles not appearing in Print Document Appearance dialog
created by Peter Grainge<http://forums.adobe.com/people/Peter+Grainge> in RoboHelp - View the full discussion<http://forums.adobe.com/message/3969382#3969382

Books are not shown in the TOC of the printed document

Hello,
I am using Robohelp 10. I have a project with several books and topics. When I generate a web help, everything is fine. But now, I have to generate a printed version of it. My problem is that on the table of contents of the generated document, the books are now shown. I need those books to be shown. Please advise.
I can not post the project I am using so I just used a very simple project which I created.
This is the original TOC.
and this is the resulting TOC in the printed document.
The books should still be part of the contents same with the original TOC.
I do not know what is wring with my set-up since I only used the default one. It will be great if you can reply to me ASAP since we need to publish our help document. Thanks a lot!

OK, the samples are a known quantity and normally generate correctly. Thus we know it is something about your environment, assuming you used the supplied style mapping template?
In the last page of the print dialog, are you using the supplied Rh Style Mapping template?
After generating with whatever you are using, have you tried right-clicking alongside the TOC and choosing Update Field. That might correct the TOC.
What version of Word are you using?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

HP C4480, OS Vista, SP1-Printer will not print documents

Please Help!
I have a C4480 all in one printer and it prints great pictures on photo paper, but it will not print documents. If it does choose to print something, then the text is in grey, although I have it set to print in black, and it prints some of the document, but not all of it. For example, it will print a sentence here and there, and skip chunks of the document. I did a test page, and it prints blank. The ink levels are good, drivers are up to date, I even followed the steps provided on this website for help, and it hasn't helped.
-Melissa

I have the same problem with HP Photosmart C4750!!
Anybody have solution?

Archiving print document and the FICA document is not closed yet

Hi SAP,
I Am testing the archiving object ISU_PRDOCL and ISU_PRDOCH and I could archive a print document for which the FICA document is not sold (still Open Item). is it a bug or the standard is made like this or do we have to implement an OSS note for this isue.
Thanks;
Best regards
Raissi Hanane

Hello,
Yes, print document will be archived even though corresponding FICA document is still open or outstanding.
To-over come this problem you can enhance your Print document header and line item archive program to exclude archiving of print document header and line item with corresponding open FICA document.
SAP has provided enhancement for Print document Archive program :
Print document headers (ETOAR001)
Print document line items (ETOAR002)
Hope this will resolve your issue.
-Thanks,
Ajay

Writr off accounts not display in print document (ISU BILLING)

Hi all,
I got the problem with write off when a customer is changed to an indigent customer all their debt has to be written off which results their account to R: 0. The invoice does not pick up all write offs with regards to write off reason 11-Indigent accounts which cause a lot of invoicing errors.
Please give me advice
Thanks
Ashok

Thanks for your reply iam happy for that, i need some clarifications about this issue...
when am i invoicing particular this account the total amount of write- offs not display in the print documents.
Please advice me .
With Regards
Ashok

Infoobject 0doc_number does not fulfill ref.integrity in record 1

Hi BW Experts,
I am facing an error in quality server "infoobject 0doc_number does not fulfill ref.integrity in record" while scheduling the infopackage. But it was working fine in development server.
While scheduling the infopackage i have choosen the option "always update data if no master data exists for the data"
Also tried with the "Do not update data if no master data exists for a characteristic"
Can anyone help me with solution as this issue is critical for me.
Points rewarded.

Ganesh,
I want to add one more point... i can't comment whether do we need to add the Referencial Integrety Check for Document Number .i.e 0DOC_NUMBER.
One thing i want to say is that It is mainly for BW integrated with Flat Files, DB Connect etc. also for SAP Systems if any conversion routine exists. Other wise SAP Systems will provide correct Data. If other non-SAP Systems connected to BW, it's better to add that Check. That will put some extra check while loading data. still it is good practice.
1. Try with Option Load Data without Master data.
2. if above option won't work, try load Master Data first. It will create SID for New Documents. then load the Transactional Data.
I think you already tried 1st option. you didn't tried 2nd option.
Let me know how it goes.
Regards,
Nagesh Ganisetti.
*Keep Update the Status that will help us.

Not convert pagetitles to Heading 1 in Print Document

I am still very new to Adobe RoboHelp 7. I converted my
webhelp to Word.
In all my topics, I start a page with h1, h2, or h3 headings.
I do not need to export the page titles to the print document. How
can I prevent this needless conversion?

The problem I had with "duplicate" headings arose because I
am learning RoboHelp 7 by trial and error. I noticed that when I
promoted a topic to the so-called book level, I could no longer
open the topic in the editor from TOC. So I inserted another copy
of the topic in the TOC just below the book. Therefore, I got extra
headings when I exported the webhelp to MS Word. I am eliminating
this problem now on my own.
I notice that the page titles occur in the header part of the
HTML topics, not in the body part. Therefore, when a page is
produced in webhelp, only the text beginning with the first heading
appears. So I have a non-problem.
Sorry to bother you. Have a restful weekend.
By the way, when I opened your webpage, I did not see where I
could leave email.

Some letter are not typed well

It's been less than 10 days to use an ipod touch. I charged it with a computer and tried to type, but some English letters are not typed well. What should I do?

adam wrote:
Hello all,
I am using oracle 9i version for oracle application server .Before I was using jre 1.3.1.17 version but all the forms and reports has been working well on the application server.In the last week i was installed java 6 instead of jre 1.3.1.17 ,most of the forms and reports are working well in java but some forms are not working in java.It is going to blank screen while we select form from the menu item.Java / JRE 6_XX isn't supported with forms 9i.
No JRE version newer than 1.4 was supported for use with Forms 9uninstall it and back to supported version.
Check the compatibility list. Jinitiator and JRE compatible check
may check this link...10g Releae 1 move from J-Initiator to JRE {answer of Michael ..}
Hope this helps
Hamid
If someone's response is helpful or correct, please mark it accordingly.*

My hp printer is not typing refer to printer documents 0*61011bed

Similar Messages

Maybe you are looking for