My HP wireless printer does not shpw up on my pc and iphone. Is you website nor working?

Wireless Printer does not show up on the printing screen

You might want to take a look at Printopia to see if it will do what you want. There is a free trial, so you will know for sure before you buy.
The upside with Printopia is that printing from the iPhone will work just as if you had an AirPrint printer.
The downside with Printopia is that you must have a Mac running on the network to be able to print.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
I have no interest in Printopia other than that as a customer.

Similar Messages

HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed. Sorry.
You do have some options at this point.
If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option. However, it is my opinion that this money would be better spend being applied towards a new printer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Help with hp 7520 wireless printer does not recognize black photo ink

brand new 7520 hp photosmart wireless printer . i set it up put in all set up ink cartridges correctly. machine says missing cartridge shows photo of black photo ink . this machine is not recognizing the ink. i heard it snap in and i see it but this wireless photosmart 7520 wireless printer is not smart enough to recognize its own set up photo black ink ive tried everything i even went to staples and purchased a new photo black ink. put it in and again it states that it is missing. any suggestions before i throw it in the trash where a stupid machine belongs many thanks

Hello @notrevo157,
Welcome to the HP Support Forums! I see you are setting up your HP Photosmart 7520 and it is not recognizing the Black setup cartridge. You have tried replacing the cartridge with no success.
I would like you to start troubleshooting here: Ink Cartridge Problem: An 'Ink Cartridge Problem,' 'Incompatible Ink Cartridge,' or 'Ink Cartridge F..., I understand you may not be getting this exact error message however these are the steps I would like you to do to try and resolve the issue you are experiencing.
If after the troubleshooting you are still experiencing the issue, I would call our technical support at 800-474-6836 as you may need the setup cartridge replaced. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Wireless printer does not work after update

I have VM fusion running on my MAC with a wireless printer enabled on my MAC. Prior to the security update, the printer worked seamlessly. Since the update, I can no longer "see" the printer in Windows XP. Any suggestions?

More information.
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About

Wireless printing does not work when VPN into network (officejet 4500)

Officejet 4500 G510n
I print with wireless, which works fine,
Until I VPN into the network (which is most of the day) at which point printer shows offline.
To print what is in the que, I have to log out of the network, wait for it to print, then log back in.
Is there a fix for this?

Hi,
Thank you for your reply.
For that you will have to contact your network administrator, ask them to grant you access to use the resources on the local network when you are connected to the VPN. So that you can use the printer, when you are connected to the VPN.
As I Said earlier, when you are connected to the VPN you completely on a different network (Office Network) and you are disconnected from your local network. Your local network will just be acting as a bridge.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Hp 200 wireless printer does not print the shared attachment only body of the email

In the past I have been able to share an email with the printer and the attachment was printed. Suddenly only the body of the email prints but no attachment. Would also like to know whether one can suppress the printing of the body of the email and print only the attachment. Don't want to waste paper.

Thanks for that additional information @Karl3.
I have a few suggestions that may resolve your ePrint issue. It is possible to print attachments using the ePrint via email method, but results may vary. At times, the formatting of an attachment is lost when using this method or at worst, it will not print.
As it's clear your PDF document is not printing using this approach, I recommend downloading and installing the HP ePrint app - click here to do so.
You'll see that it's geared towards Android users, however, if your Blackberry Z10's software is up-to-date, this app should work for you. Once installed, you'll be able to launch the ePrint app and print directly from files and documents saved to your device. With this interface you have greater control over what comes out of the printer.
With respect to your query about eliminating the extra pages that result from your phone's email signature, click here for instructions on how to turn off your email signature. If you swipe Auto Signature off as indicated in Blackberry's forum, this should ideally stop the undesired signature page from accompanying all ePrint attachment jobs. If the ePrint app doesn't work out for you, see if printing with the signature off yields a better result. Keep in mind when you're sending ePrint jobs to your printer via email that you need to have something in the subject line.
Please let me know the result of your troubleshooting by responding to this post. Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Printer does not retain network security key , after I log off and log back on .

I have a HP Photosmart , eprint wireless printer. For some unknown reason, everytime I shut down my laptop and then restart it. My printer does not remember my Network Security Key, and I have to put it back in on the printer keypad. This is not only slow, but a real pain ! How can I get the printer to store my security settings permanently ? Thanks !

What operating system does the computer use?
What model is the printer?
What brand/model is the router?
Is WEP or WPA being used?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

My new iphone 5 email is synched with my home office computer Outlook email using a POP account, but deleting an email on my computer does not delete it on my phone and vice versa. Is there any way to get a true synch?.

My new iPhone 5 email is synched with my home office computer Outlook email using a POP account, but deleting an email on my computer does not delete the email on my phone and vice versa. Is there any way to get a true synch?.

POP does not support synchronization between the server and clients. You will need to use IMAP or Exchange Active Sync if your email provider supports it.

Photosmart C6180 on wireless network does not respond when attempting to print

Photosmart C6180 successfully installed on wireless network does not respond when attempting to print. All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print. Get no error message other than document failed to print. HELP!

So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

Printer does not show in Rendezvous in Preinter Setup Utility

I am using a G4 Ti 15" laptop usually connected wirelessly to an AirPort Extreme BS. Also connected to that BS is a desktop (ethernet), cable modem, and a HP LaserJet 2200 printer. If I connected the printer directly to the laptop, it prints. However, if I try to print wirelessly, it doed not work. In the Printer Setup Utility when I try to add a printer and select Rendezvous, the printer does not showup in the available list.

Erven,
Have you followed these instructions from the help pages of Printer Setup Utility?
Connecting to a network printer
If your computer is connected to a network, you can use the printers in your local area, including those that use Bonjour (formerly Rendezvous), AppleTalk, and OpenDirectory.
Open a document to print, and then choose File > Print.
Choose Add Printer from the Printer pop-up menu, select the printer in the dialog that appears, and then click Add.
The dialog lists shared, Bonjour, AppleTalk, and Open Directory printers. You may need to wait a short while before your printer appears.
If you don't see your printer, click More Printers, choose your printer's type from the pop-up menu in the dialog that appears, select the printer, and then click Add.
If the specific type of printer you're using is listed, choose that type. For example, if you're using an Epson AppleTalk printer, you may be able to choose Epson AppleTalk.
If you choose AppleTalk, another pop-up menu appears that lets you choose the AppleTalk zone for the printer.
When you select your printer in the Add Printer or More Printers dialog, Mac OS X finds the printer's driver and adds the printer to the Printer pop-up menu. If Mac OS X cannot the printer driver, "Driver not Installed" or "Gimp-print" appears in the model pop-up menu.
If you still cannot find the printer, it may be an IP printer, and you will need to follow the instructions for how to set up an IP printer.
Usually, your computer can detect whether a printer has special accessories installed, such as additional paper trays, extra memory, or a duplex unit. If it can't, a dialog appears that lets you specify them. Make sure the settings in that dialog accurately reflect your printer's installed accessories so you can take full advantage of them.
See also
Connecting to an IP Printing network printer
I can't print to a network printer
Good Luck
SF

HP 3054 Wireless Printer WIll Not Stay Connected -

I have had an HP 3054 wireless printer for the last few years. During this time I had minimal setup issues with the printer. Last month I moved out of state and have had constant issues.
Most recently I have been able to "see" the network when setting up the printer but it would not connect. I have a UBEE modem router and both a PC with Windows 7 (64 bit) and a MacBook Air with Mac OS 10.7.5
After HOURS (and I mean like 12 hours in total) of playing around on looking on these boards I somehow got it connected to both wireless yesterday. Last night we had a storm, the power went out and thus my printer was offline and would not reconnect to the network again.
I am not very technical, but I had tried to do a "static lease" yesterday which I thought would keep it from changing the IP if something like that were to happen?
I have no idea exactly what I did, but it looks like I was able to reconnect this morn by reinstalling the software and changing the control channel on the wireless router. I NEVER had to do this with my old qwest router.
Can someone tell me if I am better off just getting a new printer? This is a real hassle and annoying is an understatement.
I need a much more permanent solution to this issue.
Thank you for your time and help!

Hello JRYREX,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you were able to get the printer back on the network. I would like to offer a link that will assist you in the future if this issues happens again. Please click on the following link for when the Printer Does Not Maintain Wireless Connection.
If you are interested in purchasing another printer, I suggest that you consider a model that has the Wireless set up wizard on the front panel of the printer. Officejet models has this option.
If you have any other questions of concerns, please feel free to write me back at any time.
I hope you have a Great Thursday.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP P1102w Wireless Printer will not pair with a Motorola SBG6782-AC Wireless Cable Modem Gateway

I previously had AT&T U-verse Internet using an Arris IPDSL NVG510 Wireless Modem Gateway. My HP Laptop running Windows 8.1 and the HP LasrJet Pro P1102w Wireless Prnter routinely & automatically connected to the NVG510 Wireless Network without any problems over the past two years, and the wireless Printer worked without problems. I recently replaced the AT&T U-verse Internet connection with a 25 Mbs Comcast Xfinity Intrnet connection, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway. My HP Laptop running Win 8.1 Pro connects to the Network and accesses the Internet with no problems what-so-ever; However, the HP LaserJet Pro P1102w wireless Printer does connect to the Wireless network and I cannot Print at all from my laptop. I have tried all the P1102w Wireless Printer Setup suggestions from the HP Printer Support Site, but to no avail. I have also updated the Printer Firmware and Loaded the latest Full Product Installation & Driver Software. I have tried and re-tried these suggestions over the last two days, but with no luck. I would greatly appreciately any help from the experts in this Forum. to get the printer to work wirelessly, since we also wirelessly print to this printer from IPads and other wireless laptops.

Hi , I see that you are having issues connecting the printer to the new router. I would like to help you. I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise. Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page. If the network name has any spaces or special characters, the printer may not recognize it. The printer is only capable of sending/receiving in the 2.4 ghz band. If it is set to 5 GHZ network you may need to change to 2.4 ghz. (rename the 5 ghz or shut it off)
The WPA key setting needs to be on AES to work correctly not TKIP.Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from Configuration page.You might need to contact your router company for further assistance to check those settings. Try running the Wireless Configuration Wizard from the HP software to configure the printer over the network. If you appreciate my efforts, please click the 'Thumbs up' button below.If you have any issues, please let me know what steps you have taken and the results. Thank You.

Problem with wifi roaming - printer does not join SSID

In WiFi network with 2 APs with same SSID and security setup (WPA2) working well in roaming for PCs,
samrtphone and MacBook HP printer does not join WLAN and wireless test page from the printer shows as reason that priner see more then one AccessPoint with same SSID.
Product name HP Deskjet 3070 All-in-One Printer - B611a
Model CQ191B
Serial CN192332K805MQ
Service ID 22114
Firmware version MUM1FN1117BR
Region Europe

Assuming that one of the APs runs DHCP and that the other is bridged, turn the briged AP off. Now, connect the printer to the other AP, even if you have to move the printer.
Once the printer is connected it should work fine once you turn the second AP back on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

New router, printer does not work

A new wireless internet router and modem was installed yesterday. My printer does not respond from my MacBook Pro or my iPad. I followed all troubleshooting advice on HP and Apple websites. No luck. Apple support today suggested that my printer may need additional informatin which I cannot change. The Network ConfigurationCheck was perfect except for address changes and one other which may be significant. URLs for embedded web servers changed from http:/HP618550 to http://dhcppc2.
The Wireless Network Test Results were perfect. My computers acess the internet also without problems. Apple had me put a USB cable between the MacBook and the printer. Then the printer worked just fine. He thought (not being a printer guru) that perhaps the communication between the router and printer was the problem. Hence I come to this site. I have followed all HP site troubleshooting advice and met each criteria. HELP?

After reading this through again, I am wondering if the router is unable to support Bonjour properly. Bonjour is the discovery service through which your Mac finds your printer on your network.
Although not for your identical router, this article may be helpful: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02986958&cc=us&dlc=en&lc=en#N135
If we can't get this resolved a for-sure, kill-it-dead solution is to get a normal, standard router (Linksys or Netgear) and put it in line with your ZyXel, disabling its wireless. I can help if you want to go this way. A good standard router would be $40 and you would be done.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My HP wireless printer does not shpw up on my pc and iphone. Is you website nor working?

Similar Messages

Maybe you are looking for