My internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well
my internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well and took about 4 hours to finally be able to shut down and close everything. Does anyone know how to fix this? Im going into exams and need my internet to work
Thanks
I dont know if your allowed to show images here but if you are then these pictures will show you what happens.
This is what happens when I turn on my iMac (normal)
This is what happens a few seconds after I turn on my iMac
Here it is up close
Hopefully these pictures will help you understand what's been hapening on my iMac when I turn it on.
Thanks
Similar Messages
-
I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect. It says something about the IP address being used by another device. Second wifi network was also created. The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??
If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
Wait a full minute
Start the modem, and let it run by itself for 2-3 minutes
Start the next device connected to the modem and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network -
I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.
Your warranty includes 90 days of phone support. Contact Apple.
-
I have photos with the same numer but they are different photos how can I fix that?
I have photos with same names but they are different photos. Can I rename these photos ? How can I do this?
you can save a file with the same name by dragging and dropping from iphoto to a Finder folder
but (and there are always buts) you can only do up to 4 photos at a time
any more and you are not given the option
This is the error message you get:
An item named “IMG_8770.JPG” already exists in this location. Do you want to replace it with the one you’re moving?
4 or lesss your options are:
Keep Both Stop Replace
5 or more your options change
Skip Stop Replace
it will add a space and a 2 to the name
IMG_8816.JPG turns to IMG_8816 2.JPG
this is the solution I was looking for; let the computer do the name change
Cheers! -
I got creative suite 6 design standard and bridge isn´t working anymore.
i got creative suite 6 design standard and bridge isn´t working anymore.
it says I should delete the cache in order to get started but it always breaks down while doing it.
I tried to reinstall but also this didn´t work.
what can I do?Without proper system information nobody can tell you anything specific. You can always delete the Bridge cache at the operating system level - it is, after all, merely a file/ folder.
Mylenium -
Spry dataset not loading in IE8, working fine in Firefox and Google Chrome
Hi,
I made this page http://www.clermont-herault-concerts.fr/Ulrike_Van_Cotthem_repertoire.asp and it renders fine in Firefox 3.6.7 and Google Chrome, yet not in IE8, all on an XP-platform. The page validates for W3C XHTML and CSS.
The problem is that instead of loading and rendering the data, the IE8 toolbar just shows something like "waiting for 2 more data". The same happens with the php-version of the same page.
An identical problem happens with this page http://www.clermont-herault-concerts.fr/Ulrike_Van_Cotthem_media.asp.
When debugging, IE8 reports two bugs:
1. the "Object doesn't support this property or method" in character 3 of line 31 of ImageMenu.js, returning Code:0 and then
2. the "Object doesn't support this property or method" in character 1 of line 1 of http://www.clermont-herault-concerts.fr/Ulrike_Van_Cotthem_repertoire.asp, returning Code:0
Strangely enough, I used the same technique in this page http://www.clermont-herault-concerts.fr/Ulrike_Van_Cotthem_concerts.asp, and here all goes fine.
Any idea what might go wrong and how to solve this problem ?
Thx in advance for your help.
ErikI also can't get rok my page in IE
All work on the other browsers.
If i change the extension name of the page in ".xml" it works in IE.
But cose the page where i get the data is a dynamic page i can't name it xml. i need ".aspx" extension.
Can anyone from ADOBE please help us?
Thank you -
My iPod 5th gen connects to wifi but the internet doesn't work.
So we were watching netflix on the ps4 and something happened and now my ipod will connect to the wifi but the internet doesn't work. everything else connects just fine to the internet just not my ipod. I've renew my lease, reset my settings and network, forgot my network and rejoined, turn my ipod completely off and back on, turned my wifi off then back open. The IP address is 192.xxx.x.xx
its the ipod 5th generation 16gb. With the latest updateDoes the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?
Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W -
I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.
I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. -
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .
Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob -
I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.
Try resetting the SMC.
MacBook and MacBook Pro with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer
To reset the SMC on newer Mac portables with a battery you cannot remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
Hi there,
Wondering if you might know? I don't have enough space to update the new software on iPad. So my facetime isn't working anymore, this is prob why. Seems I have to delete like all the games/apps we have to do so. Will I lose the progress data/levels in the games? But how do I back up the games data?
Please help. Scared to delete them to update and then not have the space to restore them and if I get them again will the levels/progress be gone?
Thanks RachelConnect your device to iTunes and do the update through iTunes. Using a computer takes much less space on your device than doing the update on your device.
-
My iPod nano 3rd generation headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?
Hi Mr.Acevedo329!
I have an article here for you that can help you troubleshoot the issues you are experiencing. That article can be found right here:
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/ts1382
Specifically, you will want to take note of this section:
The headphones don't work
If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at the Apple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen
Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.
-
In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.
Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps.
Maybe you are looking for
-
IPod Touch stuck in Restore mode. (I will give 2 months of person IT help)
+(I will give 2 months of IT help [windows/networks] if you solve this, 1 month if you help me- Im a IT Tech with a degree. - see profile)+ *I was trying to sync my iTouch and it blipped and everything was gone.* *Now it is in Restore mode permanantl
-
Error while creating the structure
hello friends, i have two doubts 1) i am getting the error while creating the structure in se11. well i am creating the structure in the following way in component i am giving the values as bom and in component type i am giving the value as meins. i
-
FDM 11.1.2.1 Login problem
Hi All, We migrated a FDM app from 9.3.1 to 11.1.2.1 ,......in 11.1.2.1 we configured CSS for authentication.....now when i try to log in to FDM app in V11.1.2.1....we can login with a MSAD ID which was present in V9.3.1 .we are not able to login wit
-
This saved a web page that I want deleted. How do I get rid of this?
-
ITunes says nano can't play file type
After updating to 1.1.3 for my nano 8GB, there are 101 songs that iTunes refuses to sync to the nano, saying: Some of the items in the iTunes library, including "Great Escape", were not copied to the iPod "My iPod" because they cannot be played on th