My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?

My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?

If you have restored to factory settings and started as new, there is nothing more that you can do on your own. Make an appointment at an Apple Store and ask them for help. You might have a hardware problem and the Apple Store techs will be able to determine that.

Similar Messages

  • My iphone wont turn on, it keeps loading for the longest time and then the apple logo appears for about 10 seconds and then glitches to the color blue and repeats.What do i do?

    My iphone wont turn on, it keeps loading for the longest time and then the apple logo appears for about 10 seconds and then glitches to the color blue and repeats.What do i do?

    Hi there e12345,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • HT1349 I was resetting my iPhone 4 and then the Apple logo came up and a a bar under it, then it got stuck. Please help

    I was resetting my iPhone 4 and then the Apple logo came up and a a bar under it, then it got stuck. Please help

    Hi
    I have done lots of reading on th einternet ref this, i have now got as far as the Safe mode reboot, Boot the Iphone up in Safe mode, but now iTunes ask if i want to restore the iphone back to factory setting, which i want to do Please!!!!
    as soon as it starts it then checks for any new software for the phone, at this stage it others me the new os5 software, but it drops out saying error 3194 again, it just keeps going around in a loop.

  • I was restore my i phone 4 and  then the apple logo is still no action

    i was restore my i phone 4 and  then the apple logo is still no action so what can i do in this matter ?????????????/

    Hi
    I have done lots of reading on th einternet ref this, i have now got as far as the Safe mode reboot, Boot the Iphone up in Safe mode, but now iTunes ask if i want to restore the iphone back to factory setting, which i want to do Please!!!!
    as soon as it starts it then checks for any new software for the phone, at this stage it others me the new os5 software, but it drops out saying error 3194 again, it just keeps going around in a loop.

  • Iphone 5S is stuck with a battery icon and then the apple logo

    HELP ME!!!!!!!!!!!  My iphone 5s is really doing something strange. when I plug it in I get a quick battery icon with four vertical red lines and then the apple logo appears for about 3 seconds and then disappears. when I plug it into ITunes it tells me that the phone is in recovery mode  and will have to be restored and when I try to restore it gives me an error and wont work. I have tried everything. please help me. 

    And if you check the link I posted, you'll find information on troubleshooting:
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.

  • TS1538 I have iPad 3. Today, I updated iOS software with the latest update. After that it does not start up. Again and again the apple logo is flashing and nothing is happening. My device is not also detected in iTune. I did every possible things to resta

    I have a iPad 3 (wifi+cellular). Today I updated with the latest software update. But after the installation of the update it doesn't start. Again and again the apple logo flashes and nothing happens. I tried to reset it by accessing it through iTune. But it is not recognized by iTune. Please help.

    Hello bhar.suman,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Have a nice day,
    Mario

  • HT201263 None of these answers help my problem.  My ipad will not leave the Apple logo.  I hold both buttons and the screen goes black, then the apple logo immediately pops back up.  I can't do anything because the apple logo just keeps popping back on.

    I haven't been able to find any answers that solve my problem.  My Ipad will not leave the Apple logo.  I hold both buttons and the screen goes black and then the Apple logo immediately pops back up.  I can't get the red slider screen at all.  No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

    Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
    When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
    while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
    You should now be able to restore

  • My ipad2 keeps turning itself off and On

    my ipad2 keeps turning itself off and on. I can be playing a game or looking on the Internet and it will just turn off and restart all by itself. I pulled up and hooked it up to itunes on my computer but I'm not really sure what to do there either.  It's so annoying, especially when it's used daily, or all day, by me or my kids and it's constantly shutting off in the middle of things.

    DId the rebooting start recently after doing an iOS update or installing a game? 
    There could be several reasons for your iPad randomly shutting down & restarting. 
    Sometimes low memory (RAM) can cause the issue. 
    First, restart the iPad by holding down the home & sleep/wake buttons simultaneously until the Apple logo appears then let go and wait until the iPad boots up normally.  This can help clear the cache & free up memory.
    If that doesn't work, try a general reset:
    Settings->General->Reset->Reset All Settings.  You will not lose any data but will have to log back into your Wifi networks.
    If the issue occurs while using a particular app, try uninstalling the app to see if it continues.
    As a last resort try restoring the iPad back to factory settings.  Be sure to backup your iPad first.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Unfortunately, it may also be that your battery is starting to fail but try the above to see if the problem persists.

  • My iPad air keeps turning itself off,why?

    My iPad air -purchased Oct 13 keeps turning itself off. Software updated. Can take up to 2 hours to turn on again. Anyone know why?

    2 hours? Is the battery fully charged? You may also look at this TID...
    http://support.apple.com/kb/TS3281

  • After updating my iPod 4 and my iPhone 3gs to 5.1 it keeps turning itself off whenever I'm trying to load a larger web-page, or doing some hard operations. Is there anything I can do to fix this?

    After updating my iPod 4 and my iPhone 3gs to 5.1 it keeps turning itself off whenever I'm trying to load a larger web-page, or doing some hard operations. Is there anything I can do to fix this?

    Have yu tried the standard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • HT201210 My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

    My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

    See this article how to go about restoring your device from recovery mode:
    http://support.apple.com/kb/HT1808
    Good luck!

  • My iPhone 4S keep turning itself off then on

    My I phone 4s and iPad keep turning itself off and on when on face time can you help. Please

    You either have a hardware or software issue. Try restoring your phone to see if that fixes things.

  • Why does my lap top keep turning itself off?

    why does my lap top keep turning itself off?

    Some details will help like does it do this when the power adapter is plugged in. Also what model and year computer are you using?

  • My ht-ct80 sound bar keeps turning itself off every 15min.

    4 days ago I bought a htct80 sound bar and it keeps turning itself off every 15min. I serched the internet for a solution to no avail. So I need a answer from sony. Its a great sound bar while its on. Please give me a solution or i will have to take it back for a refund this weekend. If anyone else is having this ptoblem. And i know there are many please reply to this post. The more that reply the more likely we will get a rwsponse from sony.

    Hello everyone,
    The Sound Bar turning off every 15minutes is related to the Auto Standby function due to the Sound Bar not receiving an input signal.  Unfortunately, there are two conditions where the sound bar will recieve a low input signal that results in the Auto Standby triggering incorrectly.
    The first case is when the TV’s headphone jack serves as an audio output jack.  This is not a recommended method for Audio Input for the Soundbar.  If you are using this method, check the TV’s audio output settings. For details, refer to the TV’s operating instructions.  If you can not change audio output setting, set up TV volume which is strong enough to prevent it from entering Standby mode.
    The second case is when you are using a set-top box (Cable box) that has a volume setting.  You can either change the Audio Settings on the set-top box for Fixed Audio Out (if available) or increase the volume on the set top box(Cable box) to maximum setting and then adjust the volume on the Sound Bar itself to obtain the desired actual volume.
    Thank you,
    ---Chris

Maybe you are looking for

  • Autorun JAR file on deployment

    Hi, I am trying to deploy a simple JAR file [a Single class file w/ a main function()] on OC4J server 10.1.3.4. I've wrapped the JAR as an EAR file in order to deploy it on the OC4J however when I start the OC4J the class file doesn't run on it's own

  • Customer invoices payment thru ACH

    Hi We are getting a PDF file from BOA for customer payment made through ACH. Now the clients wants to be automated like the lockbox. Is there a solution for customer payment made through ACH and clearing is done in SAP. You might have came across thi

  • ISE NEEDS THE INTERNET FOR THE CLIENT PORTAL?

    Guys this might seem like a silly question but ill ask anyway. Out setup is fairly simple WLC5760 (Code 3.3 i think) ISE 1.2 and a few 2600 series APs. We have two portals, authenticated guest and Corporate that exist on the ISE. The issue is this -

  • 802.1X Machine Authentication ONLY!

    Hi. I have a customer who wants to perform 802.1x machine authentication only to prevent users connecting there own devices to the corporate network. The machine credentials will be authenticated via Cisco ACS which will proxy the authentication to A

  • I need help on fixing the bug in my ipod 4

    I called apple they sent me an email now do i just reset the hole thing??