My ipad won't start up. it's less than 1 year old.  I've tried plugging it in and pressing the start button.  the apple logo appears but then disappears and nothing else happens.

My IPad shut down this afternoon and now it won't start up.  It's less than 1 year old.  I tried plugging it in and pressing the on/off button.  After holding the button in for several seconds, the Apple icon appears, but then disappears. 

First, try this:
Plug it in to the wall using an Apple charger and Apple cable for several hours.  The idea is to fully charge it.
Then hold the home and on/off buttons together for about 10 seconds.  Hopefully the Apple logo will appear and it will start.  Do not release the buttons until you see the Apple logo.
If it starts, great.  If not, you say your iPad is less than a year old.  If you bought it brand new from an Apple Store or Authorized Apple vendor, it is under warranty.  Take it to an Apple Store or Authorized Apple Service Center for diagnosis and repair.

Similar Messages

  • When i start my ipad 3 the apple logo appears but then a loading bar appears and it stucks i have restarted it but nothing is happening pleeeeease help me!i love my ipad sooo much.....!!!

    when i start my ipad 3 the apple logo appears but then a loading bar appears and it stucks i have restarted it but nothing is happening pleeeeease help me! i love my ipad sooo much.....!!!

    Try this first.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that does not help, you may have to restore your iPad.
    iTunes: Backing up, updating and restoring iOS software.
    If that doesn't work - You will have to use recovery mode
    iPad: Unable to update or restore

  • My phone went blank.  It still had 41% battery life.  I have tried to reset by holding down the sleep button and botton on top until the Apple Icon appears but then after that, nothing.  Any ideas?

    I had just checked my phone and it had 41% battery life left. A few minutes later, it simply went blank and won't do anything. I tried reseting it by pushing down on the wake/sleep button and the button on top until the Apple logo appeared, but that didn't help.  Any ideas?

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • I have an iphone 4 . A new screen has been fitted front and back. It suffered a bit of a bang. Now when the phone is turned on the apple logo appears but nothing more  . Could there be a problem elsewhere ? Other than smashed screen? Any ideas welcome

    I have an iphone 4 . It's had a new front and back screen fitted after a bit of a bang . Now when turned on the apple logo appears on the screen and then goes off. Then appears again etc etc etc .
    It won't go any further . Any ideas as to what else may be an issue or has anyone else had the same problem and what was the outcome . If I back up to iTunes will I be able to back up my information without any activity showing on the screen !! I'm lost without all my information . I haven't backed up to iCloud for at least 5 months. Can anyone help me PLEASE?????

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • I-mac won't start up.  apple logo appears at first

    started out with the beach ball spinning for a long time before homepage displayed.  Then it wouldn't start up at all, just the little wheel spinning around & thats all.  Tried the different suggestions of holding certan keys down as I hit the power button.   The white screen with thew apple logo would display & then it would change to a small circle with a bar through the middle....... Help, I'm lost

    I'm assuming your using 10.8 so try and boot to recovery mode. Hold down cmd + R while booting.
    http://support.apple.com/kb/HT4718

  • HT1430 Please help! Ive tried resetting IPAD by holding down both buttons the apple logo appears but its still disabled.???

    Please Help!! I've tried to unlock my IPAD..using instructions given to do so..Apple Logo shows up..but nothing else happens.Still disabled.?

    If the iPad is disabled, then you will have to restore the iPad in recovery mode on iTunes.

  • I cannot turn on my ipod touch. the apple logo appears but does nothing after and when connected to the computer, it is nor recognize. what's the solution for this?

    how to fix ipod touch if it hungs/ does not turn on and stays only on the apple logo when you press/hold the keys home and sleep/wake. and when connected to the computer, it does not appear in the itunes that the ipod is connected or simply the computer does not recognize the device. i barely need you help guys! please...

    I found this possible solution on another support thread, so I tried it.
    turn off iPod
    hold Sleep and Home buttons to start it.
    When Apple appears, let go of Sleep button, but keep holding Home button.
    When screen goes blank, let go of Home button.
    Connect cable and check iTunes to see if it has conencted.
    This did not work for me.
    I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
    I connected them with the cable, and it works like normal.  :-)

  • My ipod touch is connected to my USB port, it sais it's charging although... it doesn't show on itunes that i have plugged my device in, once i turn my ipod on the apple icon appears but then loses battery streight away and starts off all over again.

    although it is doing what i asked it to do, i want it to charge, ok so it does it... although when i turn it on it's as if it's either not charged at all but only enough to have the apple icon on my ipod, once it's had enough (which is like, a minute) it switches itself off and carries on charging, sometimes it switches itself on but this just takes it back to step one. also, when i connect my device to the USB port itunes does not recognise it for some reason, i've updated the newest version of itunes recently and i've tried annother ipod on annother computer with the same USB cable, so it's either the newest version of itunes, my ipod or my computer. please help
    P.S,
           i do have the required version of windows for this to work, my computer isn't a mac, it's a pc, hope this helps...

    how long have you had your ipod? mine did the same but after a while you need to get a new one because of the battery...

  • TS1367 My mac went all fuzzy and now wont start up. When I hit the on button it simply makes a beeping noise and nothing else happens!

    My mac went all fuzzy and now wont start up. When I hit the on button it simply makes a beeping noise and nothing else happens!

    Here's the Apple support article on beeps https://support.apple.com/kb/HT1547

  • My autofill stopped working recently.  I looked under preferences and all the necessary boxes are checked.  When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.

    my autofill stopped working recently.  I looked under preferences and all the necessary boxes are checked.  When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.

    Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
    1. Press the down-arrow key. (Credit to ASC member iNeight.)
    2. Quit and relaunch Safari. Force quit if necessary.
    3. Click in the first field to be filled, and then select
    Edit ▹ AutoFill Form
    from the menu bar. You may have to reload the page in order to do this.
    4.  Select
    Contacts ▹ Preferences ▹ vCard
    and uncheck the box marked
    Enable private me card
    if it's checked.
    5. Select your card in Contacts. Then select
    Card ▹ Make This My Card
    from the menu bar.
    6. In Safari, select
    Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
    If the box was already checked, uncheck it and then check it again.
    7. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.
    8. Run Software Update and install any available updates.

  • I receive a Software Update notice that fails. How do I find out who/what is trying to update? How do I stop its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

    About once a month I receive the Software update notice that has failed. How do I find out who/what is trying to update? If I decided I want this update how do I allow it to continue? If I decided I do not want this update how do I stop it and its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

    Hi sharkbiscuit79,
    Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013.  PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
    However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
    Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
    Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access it. Please help.

    Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access the store. Please help.

    If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
    <pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
    You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
    It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK.

  • Apple Logo and nothing else happens

    My ipad froze, i restarted it and now the apple logo stays on for hours, nothing happens, and after it goes black. What can i do??

    Did you reset the iPad by holding down on the sleep and home buttons at the same time until the Apple Logo appears on the screen?

  • I am not able to download ITunes. I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don

    I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don't see any thing else. Now not sure what else I have to do.
    Thanks,
    Ranjit

    See the further information area of Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for