My ipad2 headphone jack does not work

Has anyone had a problem with iPad 2 headphone jack? The jack does not work at all and the sound still comes out of the built in speaker. And yes, it is fully pushed in.

If you are convinced that there is nothing wrong with the headphones (you could try another set of headphones, ear buds whatever) and that you are pushing the headphones in firmly enough - check to make sure that nothing is impeding the connection between the jack and the opening on the iPad - dirt, debris ....
You could also reset the iPad. Hold down on the sleep button and home button at the same time for about 10 seconds until the Apple logo appears - ignore the red slider.

Similar Messages

  • Dell laptop headphone jack does not work when playing audio and video in Firefox 27

    My problem is similar to the one posted in this thread: https://support.mozilla.org/en-US/questions/986978?esab=a&s=laptop+headphones+don%27t+work+with+firefox&r=2&fpa=1&as=s
    I believe it has little to nothing to do with extensions.
    I have just installed Firefox 27 on the Dell Inspiron 3520 laptop of a friend. She is an unsophisticated user who has a computer for email, simple web browsing, and watching YouTube and other online videos. Because she frequently seems to end up with junk on her machine, I wanted to switch her over to Firefox so I could install ad and script blockers that would hopefully slow down the frequency of adware and malware roosting in her system.
    The laptop is a Dell Inspiron 3520 with an Intel celeron CPU (64-bit), running Windows 8. There are standard end-user applications installed (Adobe Reader, VLC Media Player, etc.), but no tweaking utilities, etc. The audio drivers are Cirrus Logic High Definition Audio.
    I've been troubleshooting the laptop today trying to track down why the integrated speakers continue to work when the headphones are plugged in, with no sound coming through the headphones. Because I had run a series of virus / malware / adware scans just before installing Firefox, I thought I had mistakenly deleted some system audio files.
    It finally became clear after toggling multiple settings, playing with Windows and Dell sound settings, and experimenting, that the headphone audio jack still works as it should in the system itself (for example, playing videos through VLC Media Player) and in Internet Explorer. It is only in Firefox that plugging in the headphones does not send audio through the headphones nor cut out the integrated speakers.
    Sometimes there is a silencing of the integrated speakers for a few seconds, but then the audio kicks in again. (I am using YouTube and a certain movie streaming website to test the audio).
    However, if the headphones are plugged in before starting the videos, the sound comes through the headphones, but unplugging the headphones, then reinserting them, stimulates problem again. Not only that, but then in YouTube the video will stall and can't be restarted until the page is reloaded.
    Again, this is a fresh Firefox install of less than 24 hours, with only Adblock, Adblock Plus Pop-up Addition, Flashblock, and NoScript installed. There are no themes installed and most of the Options are the defaults that are set upon installation.
    I have both disabled the add-ons and uninstalled them entirely before testing the headphone funtionality. In both instances the problem persisted. I've also uninstalled and let Windows re-install the Cirrus audio drivers.
    Does anyone else have any insight into this problem, and any potential solutions other than "start in Safe Mode" and "reset Firefox"?

    Firefox can switch audio devices within ~ a + or - 10 minute period or so (Just a guess). At which point it latches onto the audio device and will never change until the entire process is shutdown (read last paragraph, there is an exception)
    Ive had this problem for a few months now, at least. And I switch back and forth from my sound system and my wireless USB headset.
    If anything will fix this i believe it would be disabling "Allow applications to take exclusive control of this device" in the properties of your default audio device, but i doubt it. I think this is an issue regarding the code in firefox itself.
    I'd like to see this turned into a default feature, being able to disable and enable the ability to stay on whichever device was the default at the time of launch, or to always play on the current default device, even if its changed. That or being able to choose a specific device/devices (WOULD LOVE TO THIS).
    Other than that I dont really have a solution, and I kind of doubt anyone will unless its addressed in the next update.
    Oh I thought of one solution that doesnt require restarting firefox, disable the current audio device and the sound will automatically switch to the next available device. Or possibly when a new device is introduced?? I havent done much testing on the matter though. This is just my best guess based on my personal experience with firefox.

  • HT2844 My front headphone jack does not work when connecting a head phone to a new mac pro desktop computer.  The sound still comes from the speakers.  Any solutions?

    The front headphone jack on my new mac pro desktop computer does not transmit sound when connecting a headphone or ear buds.  The sound still comes from the speakers and is not redirected to the head phone.  The port has never worked.  Any solutions?

    okay, try option-clicking on the speaker icon on the top of your screen. That should bring up a list of sound output options. including headphone. You could try messing around with Audio MIDI. It may be possible that the thing is still stuck inside the headphone jack. Careful use of a toothpick may get it unstuck. I dunno, I've never had a problem with the headphone jack. If all else fails, call Apple or take 'er in for an appointment
    JB

  • Windows 7 Professional HP 8540w Headphone Jack does not work

    I tried everything to get my headphone jack to work. if anyone has any solutions please help. I went to the HP Support Center and download the  IDT High-Definition (HD) Audio Driver that a few other users recommended but that didnt work either. I also tried the different links thinking the year each link was uploaded would help but not luck either.
    Help!!!!

    Hi,
    Have you tried to enable it from Sound ? Please try:
    (a) Right click the speaker,
    (b) Click Playback devices, must be few in there
    (c) Right click external speaker and Enable it
    (d) Click Ok .....
    You may also want to check:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones again on my IPod touch?

    My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones with my IPod touch?

    You likely have a problem with the headphone jack.  You jhave to ways to listen to music via headphones:
    - Get the jack fixed.  Here is one place:
    DigiExpress.us - The iPad Repair Professionals
    However first I wold rule out a software problem by try the following:
    Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults.
    The other way is to use bluetooth headhone if you have a 2G or later iPod.

  • What to do if the headphone jack is not working., What to do if the headphone jack is not working., What to do if the headphone jack is not working., What to do if the headphone jack is not working.

    What to do If the headphone jack is not working

    Go to settings>icloud>storage and back up>back up
    after that preform a restore by going to
    general>reset>erase all content and settings
    this will delete everything except the enabled stuff on icloud.
    You can view whats enabled by going to icloud in settings.

  • Upper headset jack does not work

    My h8-1039 desktop (W7 Home Premium) has a headphone and microphone jack on the top and back of the PC.  On the top set of jacks, the headphones stopped workng but the microphone still does, so I have to use the headset to speak but isten through the speakers.  The rear set could be used, but very inconvenient as you can imagine.  Is there a way to determine why the upper headset jack doesn't work?
    Thanks,
    Mike
    This question was solved.
    View Solution.

    Hi,
    The headphone and mic jacks located on the valet tray are wired to the mainboard.
    I would guess either the headphone jack wire has dislodged at either connection point, or the headphone jack has failed, or the motherboard connection has failed.
    Have you tested the headset to verify it is operational?
    Have you checked Realtek Audio to eliminate software settings as the cause?
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
    HP Products:
    810-150se Desktop
    17t-j000 Notebook
    H8 1380t CTO Desktop
    560z Desktop
    Errare humanum est.

  • My headphone jack is not working on my 4S

    My dr dre beats are not working aswell as my standard sony headphones, i have inserted them into the jack but the music is playing out of the phone.

    The only other thing I can think of that you might try is to make sure there isn't any debris in the jack blocking the sensor (although that usually causes it to be stuck in headphone mode, not prevent it).  You can  do this by blowing on the jack with a can of compressed air and/or quickly inserting and removing your headphones multiple times.  If this doesn't fix things you'll probably have to make an appointment with the genius bar at a nearby Apple store to have it examined.  (I guess a long shot would also be to check Settings>Music>Volume Limit to be sure it isn't turned down all the way.)

  • Headphone jack is not working after upgrade to yosemite

    My headphone jack was perfectly ok till i was using Mavericks. However as soon as i upgraded to Yosemite the headphone jack stops working. I am not 100% sure that the software update has caused the issue but it is likely.

    I had the same problem and chatted with tech support and they told me to reset the PRAM and SMC which did not fix the issue.  After contacting them a second time I was told my computer needs to be repaired.  Which is not the problem it is a software issue.
    What finally fixed it was (this was done after resetting the PRAM and SMC):
    * Note: you can try this first and maybe it will solve your issue if not reset the PRAM and SMC then do the following.
    1. Open system preferences
    2. Chose sound
    3. Chose Output then headphones
    4. With headphones plugged in I checked the mute box on the bottom right and unchecked it they worked.
    Then when unplugged the speakers didn't work so I did the same but choosing the internal speakers
    OS X Mavericks: Reset your computer’s PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Hope this helps others!!

  • Headphone jack is not working.

    So I've had this iPod for a while, but recently it's gotten to the point where no sound is coming out of the jack. It works with my iHome and it will charge. I personally don't know what could have caused this to happen, but if anyone could tell me what may or may not be wrong and the best action to take, that would be appreciated.

    You need to replace the headphone jack. You can send it to a 3rd party repair site, such as http://www.iresq.com or go the do it yourself route. Go to http://www.ifixit.com and they have guides to disassembling/reassembling your iPod so you can see if you are up to this.
    Or, since audio through the dock is working, you can buy the FM Radio Remote:
    http://store.apple.com/us/product/MA070G/D?mco=MzE2OTkzMA

  • Headphone Jack STILL not working after hardware replacement

    Can someone help me, my headphone jack stop working suddenly from one day to another, it only plays the left channel. I took it to repair store and they changed the whole headphone jack hardware for a new one and it still has the same problem, I thought it was matter of restoring it so it could accept the new hardware but still the same issue. What should I do?

    I had the same problem and chatted with tech support and they told me to reset the PRAM and SMC which did not fix the issue.  After contacting them a second time I was told my computer needs to be repaired.  Which is not the problem it is a software issue.
    What finally fixed it was (this was done after resetting the PRAM and SMC):
    * Note: you can try this first and maybe it will solve your issue if not reset the PRAM and SMC then do the following.
    1. Open system preferences
    2. Chose sound
    3. Chose Output then headphones
    4. With headphones plugged in I checked the mute box on the bottom right and unchecked it they worked.
    Then when unplugged the speakers didn't work so I did the same but choosing the internal speakers
    OS X Mavericks: Reset your computer’s PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Hope this helps others!!

  • Headphone audio does not work.  The external output does NOT appear in system preferences at all

    It does NOT have a red light.  I have had that issue before ad was able to fix it.  My external output does NOT show up in my system preferences at all.

    Pram reset
    http://support.apple.com/kb/ht1379
    (Try a few times as you may not get the correct sequence 1st time)
    also plug headphones in a few times in case switch sticking

  • My headphone jack is not working

    Ok so my headphone jack wont work i plug in my headphones and it just keeps playing out of my computer but the only way i can get sound to my headphones is if i shut it then plug in the headphones and open it. but if i take out the headphones then it wont work again unless i shut my computer and then plug in the headphones

    http://support.apple.com/kb/ts2802
    more here
    http://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=iphone+headset +problem&oq=iphone+headset+problem&aq=f&aqi=g1&aql=&gs_sm=e&gs_upl=1226477l12335 16l0l1233727l22l21l0l11l11l0l225l1751l0.7.3l10l0
    <Edited by Host>

  • Equium P300-16T- Headphone Jack is not working

    Last night my earphones were working fine with my laptop but when I tried to watch something earlier my earphones wouldn't work but they still work if I plug them into my phone.

    And what is with notebook speakers? Are they off when you use headphone jack?
    When you disconnect earphones are speakers ON again?
    It would be interesting to know if the small switcher is working properly.
    One more thing: are you sure earphones are connected properly?

  • Brand new 3GS Headphone jack does not fit in the jack hole , anyone else?

    I just bought 32gb white 3GS 1 1/2 weeks ago, and I just went into the box to try my earphones for
    the first time. I thought I was dreaming,, but I could not get the jack to fit in the hole Even slightly forcing it didn't help. I didn't want to go crazy on pushing it. I decided to take my light case of the phone, just to make sure that the case wasn't getting in the way.. It only goes down about 3/4 way down the hole. I turned on some music,, but obviously the jack is not down enough to make the connection. Has anyone else had this problem? It just doesn't seem to want to fit, and yet it is the brand new one that came with the phone.

    OK,,, I guess I will have to try,, but the way the hole is structured, I am afraid to push too hard, and perhaps have the plastic around the metal rim crack the top of the unit from the stress. Is this a one and only time I have to go through, because I have given it a more than ample push,, and if I have to experience that every time.. I had better go to the Genius bar to find out if I can get one with a more forgiving insert. I will also go to the Rogers store and see if I get the same experience on their demo
    Message was edited by: Stoker
    Message was edited by: Stoker
    Message was edited by: Stoker

Maybe you are looking for

  • PO Interface migrate 11i to R12

    Hi All, We are migrating PO Standard (open) from 11i to R12. The questions are. 1. How could we map PO_HEADERS_ALL in 11i to PO_HEADERS_INTERFACE in R12? same with, PO_LINES_ALL and PO_DISTRIBUTIONS_ALL in 11i to PO_LINES_INTERFACE, PO_DISTRIBUTIONS_

  • Printers not displaying correctly

    Hello all. We still use WGM to deploy printers to our Macs. In the last few weeks we are seeing Google's Chrome browser incorrectly display the installed printers. Instead of seeing HP Lab Color Printer it displays as mcx_0 (or mcx_1 etc..) I know th

  • ALV grid list  report when selected  from  selection screen

    Hi folks,             I need to get ALV grid display in my list report when selected the interval values from  the selection screen. If I change the values in list of ALV grid it needs to be updated when I press UPDATE pushbutton. The output of list

  • *calling MIR7 tcode

    Hai All, Problem is when try to call MIR7 tcode in my workflow it showing without other Invoice document(Ctrl +F10) button. but when i call induvidually (/nMIR7) IT Showing that button. if u click on that button and giving Document number and fiscal

  • How to put entries in the table

    Hy, i have a table in which i have to enter the enteries, it's a user created Z table. How can i upload the enteries in that table from a excel file. thanks in advance. regards, kartikey rawat.