MY Ipad2 (iOS 5.0.1) can't see the printer canon mg6250, connected on wi-fi, seen by my Pc. Someone could help me?

Problems with Ipad and Canon printer PIxma Mg6250.
MY Ipad2 (iOS 5.0.1) can't see the printer canon mg6250, connected on wi-fi, seen by my Pc. Someone could help me?

You need to update the printer's firmware to 2.0.
Go to http://www.canon.ie/Support/Consumer_Products/products/Fax__Multifunctionals/Ink Jet/PIXMA_MG_series/PIXMA_MG6250.aspx?type=download&page=1
It is really hard to find what you need but it is at canon Ireland.

Similar Messages

  • I can not see the PC I'm connected to over VPN in the MY Network tab.

    Hi, 
    I have set up my incoming connection for my VPN
    on a Windows 8.1 PC.  I can then remotely log in with my Windows 7 laptop. The laptop establishes a connection and says that I have "ipv4 internet access."
    The problem I'm having is that I can’t find the PC in my network. What am I missing? Is Windows 7 not compatible with Windows 8.1 over
    a VPN? I have turned off my Norton's Firewall for a short period of time but this did not change anything. I have altered the IP range allocation for the incoming connection and this has helped to establish a stable connection.
    Any ideas on why I can not see the PC I'm connected to, in the (MY
    Network) tab, would be much appreciated. Thanks

    Hi Steve,
    The main issue is the Windows 8.1 machine is not listed in the Windows 7 machine via VPN ,right ?
    Please check the following settings in the network and sharing center:
    1.Check these settings in the Advanced sharing settings
    “Turn on network discovery” and “turn on file and print sharing”
    2.Ping the destination machine both with the IP address and the UNC to have a check .
    Best regards

  • Can't see the printer queue

    Hi,
    I can't see the printer queue in Snow Leopard.
    Either if I go to the Printer & Fax setting in the System Settings and try to open the printer queue it doesn't open.

    I have the same problem and I'd like to attach my issue to this thread.
    I use a Brother HL5250DN printer connected via USB cable to an Airport Express base station. The model is supported by 10.6, drivers are installed and the printer appears properly on all the lists. I can print on it, I can set all the options, but I have no access to the queue whatsoever. I can print without problems, I just can't access the queue.
    It doesn't appear in the Dock during printing.
    Pressing the button in the Printer & Fax preferences window produces no result, error or feedback of any kind.
    What's wrong? I tried reinstalling the drivers and the entire system, but without "Archive & Install" option I can't do much to ensure there are no left-overs from 10.5. Does anyone know a solution?
    Thanks in advance.
    Message was edited by: Krzysztof Zabko-Potopowicz

  • Clean install of Lion. Now I can;t see the partition on a USB external where I did a Time Machine backup. Help?

    Howdy.
    Ok, wanted to update my daughter's MacBookPro (late 2009 - 2.26ghz - 8GB RAM) I took a new external and partitioned into two GUID partitions. Installed Lion on one, and did a full (and verified) backup on the other. Booted off the external, erased the laptop drive and installed Lion. Works perfectly.
    But when I try and access the Time Machine backup, I can't even see the partition. The icon is on the Desktop, the partition is in Finder. When I first instaled it even asked if I wanted to use that partition for Time Machine. But I can't do anything but a full restore, which I obviously do not want.
    I tried going into Time Machine itself and when asked if I wanted to "Use Previous Disk" to do TM backups, I said yes. But I could not get the Mac to "inherit" the old backup.
    Migration Assistant doesn't see the partition either.
    Help?

    First I formatted 2 partitions GUID on the external and installed Lion into one of them., and backed up the Macbook (via Time Machine) into the other. I then booted off the external Lion partition, erased the Macbook, installed a fresh Lion.
    I then restarted using the new internal Macbook drive. Works perfectly. But now, when I try to use Migration Assistant I cant see the second partition, the one with the Time Machine backup.
    I know I can do it manually but actually the computer is with my daughter at college in Arizona and I'm in Connecticut, so I'd rather get to the screen that allows you to restore users and settings only.
    Thanks!

  • I can not see the other end when connecting Skype

    As I connect to Skype ,the other end see and hear me but I cannot see him .

    Frogmanian wrote:
    It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.
    MacBook Air does not run iOS.  It runs OS X (pronounced as in OS - ten).  You can check which version you have by clicking the Apple logo in the upper left of the menu bar, then "About This Mac".  The current version is OS X 10.8.4.  If you do not have that version, you can click "Software Update" just below the "About This Mac" entry under the Apple logo.
    Anyway, typically, the reason for the FaceTime behavior you're describing is a less-than-robust internet WiFi connection.

  • Can you have the plugin for microsoft Report Viewer 2008 ? (can't see the PRINT button)

    I am using Windows 7 & Fire fox 6.0

    I also have this problem, if the problem has been resolved, please email me

  • I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines and

    I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines. Can someone tell me if there is anything else I can do before a trip to the repair shop?
    Will

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • My fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my messages on his phone, how can i fix this?

    my fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my text messages that I type on his phone, how can i fix this?  I don't see any of his, just the other way around.  The icloud account is in my name. 
    also, would this affect being able to facetime each other?
    Thanks!!

    we do what your doing... we use the same ID for "Icloud".
    We do NOT use the same ID for:  Face time and Imessage

  • I can no longer use my iPad 3 since downloading IOS 7. I can't access the internet, can't get into the app store, or itunes. Can't download anything or receive or send e-mails. Not happy. Wish I had waited.

    I can no longer use my iPad 3 since downloading IOS 7. I can't access the internet, the app store, or itunes. Can't download anything or receive or send emails. Not happy. My iPad is basically useless. Tried to erase and restore. can't even do that. whish I had waited.

    Hello suzanefromnv,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Best of luck,
    Mario

  • IOS 7, when I plug my phone to my desktop, window xp, I can only see the photos that I took this morning, over 2000 photos in my phone can not be seen right now, can anyone help?

    I have just update my iPhone 5 to iOS 7, everythings gone smooth, however, when I plug my phone to my desktop, window xp, I can only see the photos that I took this morning, over 2000 photos in my phone can not be seen right now, can anyone help?

    Try to connect in recovery mode to restore, without using the latest backup, explained here:
    iOS: Unable to update or restore

  • Can't see shared printer with IOS 6 on ipad 3rd generation

    I just upgraded my 3rd generation ipad to iOS 6.0 and now it won’t see the shared printers at my office. The printers are shared on a Mac mini server running OS X Server Lion 10.7.4. I can still see the shared printers and can print to them from a 3rd generation ipad with iOS 5.1.1.
    Does anyone know what apple changed with iOS 6.0 that makes it where the shared printers aren’t showing up and what I might need to do to get them back working on my ipad with iOS 6.0?
    Thanks -

    iOS printing to a non-AirPrint printer is not supported. There's more information here: AirPrint 101
    If you had iOS printing working through yout OS X Server then you must have had another piece of software running in the server emulating AirPrint. That software isn't compatible with iOS 6.

  • My antenna signal is very weak and I have the iOS 6.1 I CAN´T GET THE WIRELESS CONNECTION

    my antenna signal is very weak and I have the iOS 6.1 I CAN´T GET THE WIRELESS CONNECTION

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • I can't see the I can't see the radio tab on my misic, iPad 2, iOS 7

    I can't see the radio tab on my misic, iPad 2, iOS 7

    iRadio is only available in the USA at the moment.

  • TS4036 My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

    My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

    Welcome to the Apple Community.
    Yes, update first, Settings > General > Software Update.
    Then navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
    When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

Maybe you are looking for

  • Is not equal to operator not working properly in obiee 11g

    Hi , I have 5 members in a dimesion ENTITY.gen5 (A,B,C,D,E) . nOW , I am using a *"is equal to "* operator in that , ENTITY.gen5 = A;B . Which results in a strange error while running the report : Socket communication error : was attempted on somthin

  • My Safari keeps hanging and it won't let me close one of the tabs.

    Hi, Everytime I try to close one of my tabs, think it's deviour.com it keeps crashing my Safari. And with Lion, it's there again the minute I reopen Safari. I have no idea how to fix this problem, the tab won't even let me read it, the min I close al

  • How to use the game centre for apple iPad mini

    How to use the game centre for apple iPad mini

  • Trouble ejecting cds - tries to reload!!

    Hi Please help, a couple of weeks ago i noticed my macbook had trouble taking cds so i had to 'push' them in more. When i try to eject it will make a clunking noise and will try to reload the cd!! i took it to an apple store who say that its not the

  • Can't find class

    Hi, A have made an annotation processing test class using netbeans 6 and jsr 269 @SupportedAnnotationTypes("*") @SupportedSourceVersion(RELEASE_6) public class CustoWizardAnnotationsTest extends AbstractProcessor { @Override public boolean process(Se