My iPhone 3GS displayed a message that it was overheated, now it wont turn on except for the Apple logo, and iTunes doesn't recognize it!
My iPhone 3GS displayed a message saying it was over heating and to turn it off.
I turned it off and the next day that I turned it back on, it wont go passed the main Apple screen.
It had a message to re-connect to iTunes, then that the IMEI and SIM were unknown.
Now it wont turn on at all!!
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.
Similar Messages
-
Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.
-
My Iphone 3g got stuck in the apple logo and itunes logo after turning it off
I Need Help Now !! My Iphone Wont Turn On I Have tried to jailbreak but still dont work
Discussion of jailbroken devices is not permitted here.
-
My iphone 5c is showing the apple logo and wont turn on at all or shut off
my iPhone 5c is not turning on it shows the apple logo and wont do anything I don't know what to do
Try restoring the phone using Recovery Mode
-
Iphone is stuck on apple logo and itunes does not recognise it
My iphone is stuck on the apple logo and itunes does'nt recognise it help would be greatly appreciated
Mac or PC? You might look at the right panel, under "More Like This" and follow some of the links.
-
Hi.. I am reinstalling ios on macbook.
While doing process, it asks for the Apple id and password. I am providing the id/password but it displays the message that apple user id has not been used with apple store... what shall I do to make my id work. Please assistJust to clarify, iOS is the operating system for iOS based devices such as the iPod touch, iPhone, and iPad.
Your Mac runs on OS X.
As for your Apple ID, help here > Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store -
I'd tried to restored my iphone but after that its just display the apple logo and nothing to work on?
Hello there, Shaneol10.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If the iPhone still isnt recognized, refer to these documents (depending on which Operating System you are using)
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
how can I unlock my iphone??? on the screen I only have the apple logo and a thing that looks like if the phone is working but no advance
Hi,
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages. -
My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter
If you are in Hong Kong, go to Digital Trade, 1/F, Sincere Plaza, Argyle Street, and it will cost you 120-150HKD, but before you go check that your power button and home button are working correctly, if not press as hard as you can, hope this will help.
-
hi!
can somebody please help me?
i wanted to update my iphone 4s to ios6. no problems until the install/loading bar appeared on the iphone. that was 2 hours ago. nothing happened there is no progress being showed.
i also reset my iphone (home button + standby button). result: the apple logo and the bar appear, but still nothing happens...
thanks for helping!
kr,
clemulusI took my phone to apple they replaced the speaker. That corrected the problem
-
iPhone 4 frozen with screen image of usb connector with arrow to iTunes logo. iTunes doesn't recognize my iPhone message says in recovery mode must restore. Try to restore and get - 1 error. What do I do now??
Hi there beee19,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
-Griff W. -
My iPhone is flashing the apple logo, and then it turn into black.. And after that, it repeats.. HELP ME
Hello LaugesenDK
Follow the steps in the article below to put your iPhone into recovery mode and then you should be able to restore your iPhone. If you have a back up you can put your back up to get your data back after it completes it restore process.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
I have reset all my settings and content of my iphone 3GS but for the last 3 hrs I am stuck at the apple logo and after sometimes its getting off and on by itself but what is coming back is the same apple logo and nothing else is happening. pls advice.
Read https://discussions.apple.com/thread/4875757?start=0&tstart
Maybe you are looking for
-
Navigational Attributes in InfoSets[based on InfoCubes] - BI 7.0
Hi Gurus, I am using BI 7.0. We tried creating a MultiProvider based on three SD Cubes[Orders/Billing & Delivery] but since the result was being displayed in 3 rows instead of 1, we tried using an InfoSet to see if this would get the results to be di
-
Storing 32-bit numbers in plc registers.
I am using Labview 7.1 and DSC/OPC to communicate to an Allen Bradley SLC 5/05 over Ethernet. In my application, I desire to write and read part numbers ranging from 0-99999999 to/from the N registers of the PLC. Now since the N (Integer) registers o
-
Regarding Exception handling for Value mapping
Hi We have a requirement for resending the message (using SXMB_MONI)for Value mapping and other message mapping related errors . Is there any others way we could achieve this , Any help on this is appreciated ? Thanks in advance, Jishi
-
SSRS - Interactive sorting based on aggregate function
Hi, I'm trying to add interactive sorting to one of the columns in my tablix. The soring should be based on the LAST visit date of my child grouping. However interactive sorting is not compatible with aggregate functions apparently. I'm using the fol
-
Just downloaded Windows 8.1 and it asked ME if I wanted to change my search engine on Mozilla - showed my the instructions, but it would not work, and then in small printing it says "this may not work because your have localized version" or some nons