My iPhone 5 will not recognize my charger (bought at apple recently), what can I do?
I bought a 6' lighting charger chord recently (within last 4-5 months) at an apple store, and suddenly it won't charge my phone.
Is there anything I can do?
If you delete the 1080p version from iTunes (but rescue the file from the trash in case you need it in the future), then go to iTunes Preferences and change download option to SD or 720p HD you should be able to redownload from the cloud under the Store's Purchased section.
I used to download SD and both HD formats but of late I use the AppleTV 1 less and only get the 1080p HD, though should probably getthe other versions in case I need them one day as they may not be there forever. It's fiddly to download all 3 formats as you have to mess around with settings but can be done.
I like to have a copy as there is no guarantee the files will be in iTunes cloud forever.
AC
Similar Messages
-
How can I get the new batman movie to play on my apple tv 1st gen it says it's the wrong format and I don't understand that the batman movies are the only movies I've purchased that will not play. I cannot sync them or stream them.
If you delete the 1080p version from iTunes (but rescue the file from the trash in case you need it in the future), then go to iTunes Preferences and change download option to SD or 720p HD you should be able to redownload from the cloud under the Store's Purchased section.
I used to download SD and both HD formats but of late I use the AppleTV 1 less and only get the 1080p HD, though should probably getthe other versions in case I need them one day as they may not be there forever. It's fiddly to download all 3 formats as you have to mess around with settings but can be done.
I like to have a copy as there is no guarantee the files will be in iTunes cloud forever.
AC -
It got A new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.
It reboots it but unplugging can also rectify communication issues like this. A restore would be the next step.
-
No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks
Most likely the phone is locked to a carrier that you haven't tried yet.
-
My husband's 3GS IPhone will not recognize a Wi-Fi connection at home or work. We have tried turning it on/off as well as turning airplane mode to on while turning it off then back on again. My 3GS IPhone is working fine with our router at home. Please advise what our next step should be. Thank you for taking the time to read this post!!
Just to double check you tried eveyrthing take a look at this link http://support.apple.com/kb/TS1398 .
Can also try powering off the home router, then the phone, and then power up the router wait for the signal and then power up the phone and see if he can connect. -
My iphone will not hold a charge
my iphone will not hold a charge. This started approx 1 1/2 months ago. I have downloaded new update as i felt that was the reason for the issue, it was not. What else could be causing it to do this?
If brand new then yes .Back up and remove photos etc as Apple will replace if found faulty
see this for guidance
What to do when you return or send your iPhone, iPad, or iPod touch in for service -
I upgraded iphone 3gs to ios6 but now iphone will not recognize SIM card
Hi,
I upgraded both ipad 2 and iphone 3gs to ios6. I don't see any issue with ipad 2 but now iphone will not recognize SIM card. "Please insert a SIM card" messageYou say "... but now panorama is not working". Panorama never was supposed to work before iOS 6, so you'll be using it for the first time with iOS 6.
The way to enable panorama is to open the camera, click the "options" button at the top center, and select panorama.
Does this work on your iPhone? If not, what symptoms of failure do you experience? -
I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard. Quicken 2006 on my new laptop runs, but will not recognize the old data qif files. What version of quicken for mac will recognize files from 2000? Or, is there a special procedure I should be following?
can't open Quicken 2000 files in classic mode on new MacBook Pro version 10.6.7
-
Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men
-
IPhone will not turn on, charge or connect to a PC
My iPhone will not turn on, I was installing the iOS update on 4% battery which i've realised is bad and now my phone won't charge, turn on or even connect to a pc, i've tried pressing the two buttons to try fix it but nothing happens the screen remains black, ive tried charging it from a wall and nothing works at all! Is there anything else I can do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPhone will not recognize my Wi-Fi password
I have reset my Password and my iPhone (and iPad) will not recognize my new (or Old ) password???
Problem resolved!
-
First I never used an apple product in my life.. so I would appreciate assistance that recognized that issue.
Just go 4S iphone but first only using on WiFi
my android and XP stuff and even vista works fine.. so this is not a WIFf issue.
I am only able to set up Gmail
Yahoo does not work or Iphone will not pick it up.. and I went to an apple web page that had information
that I tried to load on the Iphone but Iphone will STILL not recognize Yahoo.
The dumb thing keeps saying my password is wrong... Funny I have not problem using the same
password on with my DESK top Xp and it WORKS> so it is not a password issue.
Same **** thing with JUNO.
I tried using POP.JUNO.COM and 110 and SMTP.JUNO.COM 587
and still the 4S Iphone refuses to work.
Yahoo too used IMAP.MAIL.Yahoo.com 993 SMTP..MAIL.YAHOO.COM 465
Still nothing........?
On web this seems to be a big problem....
What is the secret handshake I need to know to get operational????
I have spend days on the web and found no answers.Anyone? Has anyone had experience with this problem? I've reset the extending Airport and reapplied the settings and still have the same problem.
-
my iphone will not connect to my wifi. it keeps saying the passwrd is incorrect. it used to connect automatically.
settings - general - reset - reset network settings.
-
Iphone will not synch with itunes after downloading most recent itunes version
I updated to most recent version of itunes and since then my 3GS iphone will not synch with itunes. the phone is recognized by my windows computer but not recognized within itunes. I redownloaded itunes and Q but nothing. Can anyone help?
I have a Dell XPS 8500 with a 64bit i5 Processor and an Apple 4s and I have the same problem. I have been searching for days and can only get the phone recoginzed by disabling power to USB ports and there is no way I can get ITunes to show devices, so I can't see the IPhone. People say Apple monitors these sites but I haven't seen any response from a technical person. Have you? My hunch is they know about the problem but don't have a fix, and have other priorities for their team. If my hunch is correct, its quite extraordinay because I am close to selling my 4s and getting some phone which is easier to work with. Time is my scarcest resource and I have devoted way too much of it to this issue.
-
I did an automatic update to my daughter's iphone and it did not complete the update from version 6.0 to I believe 8. I waited for hours but the line stopped at 70%. I tried to restore my old settings but now my iphone will not start. When I try to start the
phone, I see the apple and a white line that never moves past 15%.Hi JG14usa,
Welcome to the Apple Support Communities!
I understand that you attempted an update on your daughter’s iPhone but the update will not complete. For this type of situation, it may be necessary to place your iPhone into recovery mode and restore. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe
Maybe you are looking for
-
How do I add bulk emails to a group in Address Book?
I'd love to figure out how to quickly capture a bulk emailing list and add all of them to an Address Book GROUP at once. This list would be either - In the TO: field - from an email I received - or - In the TO: field - of an email I am sending (reply
-
Compatibility issue with itunes 10.6 and windows 7
I just installed the update to itunes 10.6 on windows 7 64bit, and it says that it is not compatible with my theme (so it switches it back to the windows 7 basic) I normally wouldn't mind however my screen blacks out and it's really annoying. I don't
-
Compilation problem in PXIe-7695R FlexRIO
Hello, I am new to LabVIEW FPGA, before this, i used to do FPGA's in VHDL using ISE suite. In that process, I just need to change the bit files from iMPACT and my FPGA runs with the new bit file. but I am trying to do the same thing here and facing p
-
HT5271 blocked plug ins, how do i stop this?
blocked plug ins, how do i stop this?
-
Deflater setLevel + setStrategy doesn't work
Hi, I cannot seem to get Deflater.setLevel and .setStrategy to work (working on JDK1.5). If I pass a compression level in the constructor of Deflater, it works, but calling .setLevel will give me 0 bytes in compression. public void test_deflater_