My Iphone has problem with area code

I live in Afghanistan. I use Roshan GSM.  I save the contact number eg. 0799xxxxx7. when I get call from same. it is show his or her name. When I got sms from same number. It doesn't show the name. It comes just number with AFG +93 799xxxxx7.
If save the contact +93 799xxxxx7. when that person call me 0799xxxxx7. Pleas advise my best way.

Are you seeing any error messages?
This Apple doc might help ya out -> iOS: Troubleshooting carrier activation issues
If you have a backup in iTunes, you can recover your data by restoring from backup.

Similar Messages

  • With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    We are users here.  We cannot possibly know when a new update will be available.

  • UCCX 7 outbound dialing, problem with area codes

    Hello all,
    I'm just testing the outbound dialing feature in a lab, and have run into the following problem:
    I have following:
    outbound configuration:
    general:
    Customer dialing time: start (9:00) end (21:00)
    dialing prefix - 9
    international prefix - 00
    Local Area Code: 44
    Area Codes:
    44 -> Europe/London
    34 -> Europe/Madrid
    86 -> GMT-10 (for testing purposes, does not correspond to real China time).
    Then, I upload a .CSV file into a campaign with the following information:
    Jane,Smith,00447111113007
    Jacky,Chan,0086611115002
    Juan,Pablo,0034611114001
    The dialing works, the agent receives the call, accepts it, and then the call is made.
    if anyone is interested, although it has nothing to do with the question itself, the calls are translated to other extension on CUCM to be able to make a call.
    The problem is that, they are all treated as in the same AREA CODE, although I have clearly defined area codes for each of those countries.
    when the call appears it shows on the CAD as BAAreaCode: +00060
    Therefore the calls are made through to China even when it's midnight there!!!???
    I know I must be doing something wrong, but I don't know what?
    Many thanks for your help,
    Cheers,

    Hi Aaron,
    Sorry for being so late to answer you. But I've done quite a few tests last weekend and have couple traces as well.
    Apparently, the first time I added area codes, I did something incorrect, although I do not know what exactly, because now I've added area codes and it partially worked.
    Area code: 4420 - Europe/London with Daylight saving
    Area code: 3498 - Europe/Madrid with Daylight saving
    Area code: 8661 - GMT/+7 NO Daylight saving
    The first two Area codes (Spain and London) were correctly identified, In traces I could even see:
    this one is for Spain:
    type=com.cisco.executor.QueuedExecutor,Thread=MIVR_CFG_MGR_INVOKE_NOTIFICATION-33-189,Thread priority=7,Original Thread=null,Original thread priority=5,Time=null,Exception=null 358035:
    Jul 03 10:56:40.390 BST %MIVR-CFG_MGR-7-UNK:configStubImpl-replace() notified with DialingListConfig,time=2010-07-03 10:56:40.373,recordId=0,impl=class com.cisco.crs.outbound.DialingListConfig,desc=,key[137],columns[137,1,,Jacky,Chan,0086611115002,,,377,0,424,1,424,1,,1278150825843,6,0,0,0,0,0,0,0,0] 358036:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 358037:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:138 358038:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=0034981114001 0034981114001 358039:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 358040:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:numToDial=0034981114001 0034981114001 358041:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:138 358042:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Europe/Madrid",offset=3600000,dstSavings=3600000,useDaylight=true,transitions=165,lastRule=java.util.SimpleTimeZone[id=Europe/Madrid,offset=3600000,dstSavings=3600000,useDaylight=true,startYear=0,startMode=2,startMonth=2,startDay=-1,startDayOfWeek=1,startTime=3600000,startTimeMode=2,endMode=2,endMonth=9,endDay=-1,endDayOfWeek=1,endTime=3600000,endTimeMode=2]] 358043:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=true 358044:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=716 globalStartTime=480 globalEndTime=1410 358045:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=true 358046:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: no more in-memory contacts left for campaignID 1 358047:
    As we can see, localTimeMins is 716 which is: 11:56AM.  That was correct time, and in between min/max globalstart times.
    And this one is for London:
    getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 276065:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:130 276066:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=00442081114002 276067:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 276068:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:numToDial=00442081114002 276069:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:130 276070:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Europe/London",offset=0,dstSavings=3600000,useDaylight=true,transitions=242,lastRule=java.util.SimpleTimeZone[id=Europe/London,offset=0,dstSavings=3600000,useDaylight=true,startYear=0,startMode=2,startMonth=2,startDay=-1,startDayOfWeek=1,startTime=3600000,startTimeMode=2,endMode=2,endMonth=9,endDay=-1,endDayOfWeek=1,endTime=3600000,endTimeMode=2]] 276071:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=true 276072:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=627 globalStartTime=480 globalEndTime=1410 276073:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=true 276074:
    As we see, localTimeMins is 627 which is: 10:27AM which is correctly between min/max globalstart times too.
    But the problem started with GMT+7.
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: for campaignID=1 280255:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: campaignID=1;#of DLC=2 280256:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 280257:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:131 280258:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=0086611115002 280259:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 280260:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:numToDial=0086611115002 280261:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:131 280262:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Etc/GMT+7",offset=-25200000,dstSavings=0,useDaylight=false,transitions=0,lastRule=null] 280263:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=false 280264:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=148 globalStartTime=480 globalEndTime=1410 280265:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=false 280266:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: cannot dial at this time, will be marked RETRY
    It correctly identifies Etc/GMT+7 but then it calculates the localtime wrongly... It came up with 148 which is 2:28AM... and the time I was making a call GMT+0 time was around 9:28AM so GMT+7 should've been 4:28PM...
    Then I tried GMT-7 too:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: for campaignID=1 433346:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: campaignID=1;#of DLC=2 433347:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 433348:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:140 433349:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=0086611115002 433350:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 433351:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:numToDial=0086611115002 433352:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:140 433353:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:OutboundContactInfo:isRequestingContacts() for CSQ 2 returns true 433354:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:OutboundContactInfo:setNrGetContactsReqSent() for CSQ 2 to 1 433355:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:OutboundContactsRequestor before sleep 433356:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:Dialer:printLicenses() working_resources for CSQ:2 is 0 433357:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:Dialer:printLicenses() total_working_resources:0, OB_contacts_in_progress:0 433358:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Etc/GMT-7",offset=25200000,dstSavings=0,useDaylight=false,transitions=0,lastRule=null] 433359:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=false 433360:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=1045 globalStartTime=480 globalEndTime=1410 433361:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=true 433362:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: remaining # of in-memory contacts for campaignID 1:1 433363:
    and this time it did all the way around, instead of early morning, it was 1045: 5:25PM...
    I do not understand what am I doing bad... but I'm starting to think it's some kind of a bug...
    and the other problem is: outbound dialer does not even take contacts out of the campaign for calling if the server's local time is not between global start time and global end time. which should not be the case, as I understand campaign times should be applied to area code local time not to server local time.
    Many thanks to all,
    Cheers,
    George

  • Tp ended with error code 0247 - addtobuffer has problems with data- and/or

    Hello Experts,
    If you give some idea, it will be greatly appreciated.
    This transported issue started coming after power outage, sap system went hard shutdown.
    Then we brought up the system. Before that , we do not have this transport issue.
    our TMS landscape is
    DEV QA-PRD
    SED-SEQSEP
    DEV is having the TMS domain controller.
    FYI:
    *At OS level, when we do scp command using root user, it is fine for any TR.
    In STMS, while adding TR in SEQ(QA system), we  are getting error like this.
    Error:
    Transport control program tp ended with error code 0247
         Message no. XT200
    Diagnosis
         An error occurred when executing a tp command.
           Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
           Return code:    0247
           Error text:     addtobuffer has problems with data- and/or
           Request:        SEDK906339
    System Response
         The function terminates.
    Procedure
         Correct the error and execute the command again if necessary.
    This is tp version 372.04.71 (release 700, unicode enabled)
    Addtobuffer failed for SEDK906339.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    standard output from tp and from tools called by tp:
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247

    when we do scp using sm69,
    SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
    it throws the error like below,
    Host key verification failed.
                                                                                    External program terminated with exit code 1
    Thanks
    Praba

  • TS3694 My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not.  The error message indicates an unknown error has occurred, with error code 6.  Does anyone have any idea what the problem might be and how to solve it?  Many than

    My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not.  The error message indicates an unknown error has occurred, with error code 6.  Does anyone have any idea what the problem might be and how to solve it?  Many thanks.

    Hi
    I followed this guy's instructions and it worked:
    http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
    I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
    Cheers for you help.
    Andy
    Message was edited by: bigbadandy

  • Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers.

    Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers

    Hello!
    I recently just downloaded the 'Waze' app as a backup for my Garmin. I've read a few reviews that seem to rant and rave about how good the GPS app is. It is community driven and maps are constantly being updated by users. Plus it has a few other fun stuff in it (something similar to Gasbuddy where you can owe prices on the map). But like the person above me said, there is lots of useful free GPS apps in the App Store.
    Oh and I may be wrong but I remember reading an article about Google being slower about updating its maps system--ie no turn by turn voice, which many people have had complaints about.
    Happy Searching!
    Ps - if you switch I wouldn't go to Blackberry.

  • Firefox does not load long images, pixelates images if they are not in their original size, and has problems with thumbnails (in some sites)

    Firefox has problems with images.
    In sites like deviantART or ImageShack with full-view option, images that are not in full size/thumbnails get slightly pixelated e.g. http://img251.imageshack.us/f/screenshot2tq.jpg/
    Long images get completely messed up if full-viewed e.g. http://img689.imageshack.us/f/screenshot5z.jpg/ (though if the file is only big, it loads just fine)
    Also, thumbnails in some sites get messed up e.g. http://img201.imageshack.us/f/screenshotyr.jpg/
    And in general, Firefox has more 'glitches' like not allowing to add more search engines. It wasn't like that before and I can only assume that it got messed up somewhere with updates, but I'm not really sure.
    I've tried cleaning out cache, re-installing Firefox (multiple times) and even downloaded Firefox 4 beta, but the problem remains.
    I use Ubuntu.
    Does anyone else have similar problems? Or know where the problem lies?

    Do you have the latest driver for your graphics display card?
    Create a new profile as a test to check if your current profile is causing the problems.
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Vector, what is the problem with this code?

    Vector, what is the problem with this code?
    63  private java.util.Vector data=new Vector();
    64  Vector aaaaa=new Vector();
    65   data.addElement(aaaaa);
    74  aaaaa.addElement(new String("Mary"));on compiling this code, the error is
    TableDemo.java:65: <identifier> expected
                    data.addElement(aaaaa);
                                   ^
    TableDemo.java:74: <identifier> expected
                    aaaaa.addElement(new String("Mary"));
                                    ^
    TableDemo.java:65: package data does not exist
                    data.addElement(aaaaa);
                        ^
    TableDemo.java:74: package aaaaa does not exist
                    aaaaa.addElement(new String("Mary"));Friends i really got fed up with this code for more than half an hour.could anybody spot the problem?

    I can see many:
    1. i assume your code snip is inside a method. a local variable can not be declare private.
    2. if you didn't import java.util.* on top then you need to prefix package on All occurance of Vector.
    3. String in java are constant and has literal syntax. "Mary" is sufficient in most of the time, unless you purposly want to call new String("Mary") on purpose. Read java.lang.String javadoc.
    Here is a sample that would compile...:
    public class QuickMain {
         public static void main(String[] args) {
              java.util.Vector data=new java.util.Vector();
              java.util.Vector aaaaa=new java.util.Vector();
              data.addElement(aaaaa);
              aaaaa.addElement(new String("Mary"));
    }

  • My iphone has problem activating. It says incorrect apple id but the apple id is correct

    My iphone has problem activating. It says incorrect apple id but the apple id is correct ?

    FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
    You are seeing your old apple id because that was the ID that was used to download the app, you can't merge apple id.
    to update the app, you will have to enter the old password.
    Any new apps you download with your new id, will use that id and password.

  • What is the problem with the code?

    Hello, the following is a segment of code that I have written recently:
            IF DATA+1(5) <> TEXT-035.
              CATCH SYSTEM-EXCEPTIONS WEIRD_ERROR = 4
                                     OTHERS = 8.
                END CATCH.
              ENDIF.
    When I tried to compile the code, it says:
    Unable to interpret "SYSTEM-EXCEPTIONS". Possible causes: Incorrect spelling or comma error.          
    May I know where is the problem with this code? Thanks a lot!
    Regards,
    Anyi

    Here is a list of the system exceptions.
    Alphabetical List of Catchable Runtime Errors
    ,,ADDF_INT_OVERFLOW
    Overflow in addition with type I ( ADD ... UNTIL / ADD ... FROM ... TO)
    ,,ASSIGN_CASTING_ILLEGAL_CAST
    The offset and type of the source field and the target type do not match exactly in the components that are strings, tables, or references.
    ,,ASSIGN_CASTING_UNKNOWN_TYPE
    The type specified at runtime is unknown.
    ,,BCD_FIELD_OVERFLOW
    Overflow in conversion or arithmetic operations (type P with specified length)
    ,,BCD_OVERFLOW
    Overflow in conversion or arithmetic operation (type P)
    ,,BCD_ZERODIVIDE
    Division by 0 (type P)
    ,,CALL_METHOD_NOT_IMPLEMENTED
    Call of a non-implemented interface method
    ,,COMPUTE_ACOS_DOMAIN
    Invalid call of mathematical function ACOS
    ,,COMPUTE_ASIN_DOMAIN
    Invalid call of mathematical function ASIN
    ,,COMPUTE_ATAN_DOMAIN
    Invalid call of mathematical function ATAN
    ,,COMPUTE_BCD_OVERFLOW
    Overflow in arithmetic operation (all operands type P)
    ,,COMPUTE_COSH_DOMAIN
    Invalid call of mathematical function COSH
    ,,COMPUTE_COSH_OVERFLOW
    Overflow in mathematical function COSH
    ,,COMPUTE_COS_DOMAIN
    Invalid call of mathematical function COS
    ,,COMPUTE_COS_LOSS
    Result of COS function is inexact
    ,,COMPUTE_EXP_DOMAIN
    Invalid call of mathematical function EXP
    ,,COMPUTE_EXP_RANGE
    Over- or underflow in mathematical function EXP
    ,,COMPUTE_FLOAT_DIV_OVERFLOW
    Overflow in division (type F)
    ,,COMPUTE_FLOAT_MINUS_OVERFLOW
    Overflow in subtraction (type F)
    ,,COMPUTE_FLOAT_PLUS_OVERFLOW
    Overflow in addition (type F)
    ,,COMPUTE_FLOAT_TIMES_OVERFLOW
    Overflow in multiplication (type F)
    ,,COMPUTE_FLOAT_ZERODIVIDE
    Division by 0 (type F)
    ,,COMPUTE_INT_ABS_OVERFLOW
    Integer overflow when calculating the absolute value
    ,,COMPUTE_INT_DIV_OVERFLOW
    Integer overflow in division
    ,,COMPUTE_INT_MINUS_OVERFLOW
    Integer overflow in subtraction
    ,,COMPUTE_INT_PLUS_OVERFLOW
    Integer overflow in addition
    ,,COMPUTE_INT_TIMES_OVERFLOW
    Integer overflow in multiplication
    ,,COMPUTE_INT_ZERODIVIDE
    Division by 0 (type I)
    ,,COMPUTE_LOG10_ERROR
    Invalid call of the mathematical function LOG10
    ,,COMPUTE_LOG_ERROR
    Invalid call of the mathematical function LOG
    ,,COMPUTE_MATH_DOMAIN
    Invalid call of a mathematical function
    ,,COMPUTE_MATH_ERROR
    Error executing a mathematical function
    ,,COMPUTE_MATH_LOSS
    Result of a mathematical function is inexact
    ,,COMPUTE_MATH_OVERFLOW
    Overflow of a mathematical function
    ,,COMPUTE_MATH_UNDERFLOW
    Underflow in a mathematical function
    ,,COMPUTE_POW_DOMAIN
    Invalid argument when raising powers
    ,,COMPUTE_POW_RANGE
    Over- or underflow when raising powers
    ,,COMPUTE_SINH_DOMAIN
    Invalid call of the mathematical function SINH
    ,,COMPUTE_SINH_OVERFLOW
    Overflow in the mathematical function SINH
    ,,COMPUTE_SIN_DOMAIN
    Invalid call of the mathematical function SIN
    ,,COMPUTE_SIN_LOSS
    Result of the function SIN is inexact
    ,,COMPUTE_SQRT_DOMAIN
    Invalid call of the mathematical function SQRT
    ,,COMPUTE_TANH_DOMAIN
    Invalid call of the mathematical function TANH
    ,,COMPUTE_TAN_DOMAIN
    Invalid call of the mathematical function TAN
    ,,COMPUTE_TAN_LOSS
    Result of the function TAN is inexact
    ,,CONNE_IMPORT_WRONG_COMP_LENG
    Import error: A component in a structured type in the dataset has an incorrect length
    ,,CONNE_IMPORT_WRONG_COMP_TYPE
    Import error: A component of a structured type in the dataset has an incorrect length
    ,,CONNE_IMPORT_WRONG_FIELD_LENG
    Import error: A field in the dataset has an incorrect length
    ,,CONNE_IMPORT_WRONG_FIELD_TYPE
    Import error: A field in a dataset has the wrong type
    ,,CONNE_IMPORT_OBJECT_TYPE
    Import error: Type conflict between simple and structured data types
    ,,CONNE_IMPORT_WRONG_STRUCTURE
    Import error: Type conflict between structured objects
    ,,CONVT_HEX_CONFLICT
    Conversion conflict (Type X)
    ,,CONVT_NO_NUMBER
    Value for conversion cannot be interpreted as a number
    ,,CONVT_OVERFLOW
    Overflow in conversion (all types except type P)
    ,,CREATE_DATA_NOT_ALLOWED_TYPE
    The statement CREATE DATA cannot be executed with a generic type.
    ,,CREATE_DATA_UNKNOWN_TYPE
    The statement CREATE DATA cannot be executed with an unknown type.
    ,,CREATE_OBJECT_CLASS_ABSTRACT
    Attempt to instantiate an abstract class.
    ,,CREATE_OBJECT_CLASS_NOT_FOUND
    The class specified with a dynamic CREATE OBJECT was not found.
    ,,CREATE_OBJECT_CREATE_PRIVATE
    Attempt to create an object of a class defined as 'CREATE PRIVATE'.
    ,,CREATE_OBJECT_CREATE_PROTECTED
    Attempt to create an object of a class defined as 'CREATE PROTECTED'.
    ,,DATA_LENGTH_NEGATIVE
    Invalid subfield access: Negative length
    ,,DATA_LENGTH_0
    Invalid subfield access: Length 0
    ,,DATA_LENGTH_TOO_LARGE
    Invalid subfield access: Length too large
    ,,DATA_OFFSET_NEGATIVE
    Invalid subfield access: Negative offset
    ,,DATA_OFFSET_TOO_LARGE
    Invalid subfield access: Offset too large
    ,,DATA_OFFSET_LENGTH_TOO_LARGE
    Invalid subfield access: Offset + length too large
    ,,DATA_OFFSET_LENGTH_NOT_ALLOWED
    Invalid subfield access: Type not appropriate
    ,,DATASET_CANT_CLOSE
    Unable to close file. There may be no space left in the file system
    ,,DATASET_CANT_OPEN
    Unable to open file
    ,,DATASET_NO_PIPE
    The FILTER addition to the OPEN DATASET statement is not supported on the current operating system
    ,,DATASET_READ_ERROR
    Error reading a file
    ,,DATASET_TOO_MANY_FILES
    Maximum number of open files exceeded
    ,,DATASET_WRITE_ERROR
    Error writing to a file
    ,,DYN_CALL_METH_CLASSCONSTRUCTOR
    Attempt to call the class constructor
    ,,DYN_CALL_METH_CLASS_ABSTRACT
    Attempt to call an abstract method
    ,,DYN_CALL_METH_CLASS_NOT_FOUND
    Attempt to call a method of a non-existent class
    ,,DYN_CALL_METH_CONSTRUCTOR
    Attempt to call the instance constructor
    ,,DYN_CALL_METH_EXCP_NOT_FOUND
    Attempt to catch an unknown exception
    ,,DYN_CALL_METH_NOT_FOUND
    Attempt to call an unknown method
    ,,DYN_CALL_METH_NOT_IMPLEMENTED
    Attempt to call a method that has not been implemented yet
    ,,DYN_CALL_METH_NO_CLASS_METHOD
    Attempt to call an instance method via a class
    Attempt to pass a parameter with an incorrect parameter type
    ,,DYN_CALL_METH_PARAM_LITL_MOVE
    Attempt to pass a constant actual parameter to a formal EXPORTING, CHANGING or RETURNING parameter
    ,,DYN_CALL_METH_PARAM_MISSING
    An obligatory parameter was not supplied.
    ,,DYN_CALL_METH_PARAM_NOT_FOUND
    Attempt to pass an unknown parameter
    ,,DYN_CALL_METH_PARAM_TAB_TYPE
    Attempt to pass a parameter with an incorrect table type
    ,,DYN_CALL_METH_PARAM_TYPE
    Attempt to pass a parameter with an incorrect type
    ,,DYN_CALL_METH_PARREF_INITIAL
    An initial data reference was passed for an mandatory parameter.
    ,,DYN_CALL_METH_PRIVATE
    Attempt to call a private method from outside
    ,,DYN_CALL_METH_PROTECTED
    Attempt to call a protected method from outside
    ,,DYN_CALL_METH_REF_IS_INITIAL
    Attempt to call a method with an initial reference
    ,,EXPORT_BUFFER_NO_MEMORY
    The EXPORT data cluster is too large for the application buffer
    ,,EXPORT_DATASET_CANNOT_OPEN
    The IMPORT/EXPORT statement could not open the file
    ,,EXPORT_DATASET_WRITE_ERROR
    The EXPORT statement could not write to the file
    ,,GENERATE_SUBPOOL_DIR_FULL
    The system cannot generate any more temporary subroutine pools
    ,,IMPORT_ALIGNMENT_MISMATCH
    Import error: Same sequence of components, but with type conflict or different alignment in structured data types
    ,,IMPORT_TYPE_MISMATCH
    Import error: Only with IMPORT...FROM MEMORY | FROM SHARED BUFFER...
    ,,MOVE_CAST_ERROR
    Type conflict when assigning between object and interface references (only MOVE...?TO... or operator ?=)
    ,,OPEN_DATASET_NO_AUTHORITY
    No authorizatino to access the file
    ,,OPEN_PIPE_NO_AUTHORITY
    No authorization to access the file (OPEN DATASET...FILTER...).
    ,,PERFORM_PROGRAM_NAME_TOO_LONG
    Invalid program name with PERFORM statement
    ,,RMC_COMMUNICATION_FAILURE
    Communication error with Remote Method Call
    ,,RMC_INVALID_STATUS
    Status error with Remote Method Call
    ,,RMC_SYSTEM_FAILURE
    System error with Remote Method Call
    ,,STRING_LENGTH_NEGATIVE
    Invalid access with negative length to a string
    ,,STRING_LENGTH_TOO_LARGE
    Invalid access to a string (length too large)
    ,,STRING_OFFSET_NEGATIVE
    Invalid access with negative offset to a string
    ,,STRING_OFFSET_TOO_LARGE
    Invalid access to a string (offset too large)
    ,,STRING_OFFSET_LENGTH_TOO_LARGE
    Invalid access to a string (offset + length too large)
    ,,TEXTENV_CODEPAGE_NOT_ALLOWED
    Character set is not released in the system (SET LOCALE...)
    ,,TEXTENV_INVALID
    Error setting the text environment (SET LOCALE...)
    ,,TEXTENV_KEY_INVALID
    With SET LOCALE...: Value of LANGUAGE, COUNTRY or MODIFIER that is not allowed in the system.
    ,,TEXTENV_LANGUAGE_NOT_ALLOWED
    With SET LOCALE...: Invalid value of the LANGUAGE addition.
    What version of SAP are you on?   If on a newer version you may be able to create your own exception class.
    Regards,
    Rich Heilman

  • FYI: MS-7125 BIOS has problem with Hard Drives withNative Command Queuing (NCQ)

    For those the have messed my two treads on which both ended up being cause by K8N Neo4 BIOS problem with HD's with NCQ.
       Will wonders never cease? MSI Support finally conceded the BIOS has a problem with Hard Drives with NCQ and they have forwarded the problem to their programming department.
    However, do not look for any results for above two weeks.
    Roger

    The problem that this thread has been trying to follow is the incapability of the nVidia RAID Controller with Serial ATA Type 2.5 drives.  I know the threads has been hard to follow and part of that is because when I started the thread I had what appeared to be three totally un related problems, but all three were traced down the common problem of the incapability of RAID Controller with Serial ATA Type 2.5 drives.
    The title of this thread is MS-7125 BIOS has problem with Hard Drives with Native Command Queuing(NCQ).  The statement was true at the time it was written and has nothing to do with memory problems.
    Sense the thread was started MSI has fixed the BIOS part of the problem, but we have sense learned the nVidia RAID Controller Command software and its driver has problems too.  I have been working MSI Support, they have been using me to test pre-beta BIOS and Drivers soon.   Of the testing I have done the pre-beta BIOS worked and the Pre-beta 32-bit driver works.  I am assuming that the latest BIOS V1.B had as part of it included fixes was the needed fixes for working with the nVidia RAID Controller as I have test the pre-beta RAID Driver with BIOS Version V1.B as the Raid array function fine windows XP Pro 32-bit Edition.  As I have had no communications with MSI support of over a week now I am hoping for a release of 32-bit and 64-bit RAID Drivers.   But, nobody should get the hopes up, because through other backdoor sources nVidia is having a hell of a time.  One reason for this I heard is that the nVidia RAID Controller is fully software, no hardware other than the electrical drive interfaces.  Their problem started when they tried using the old 32-bit code Controller with new 64-bit hardware drivers and now they are having to totally rewrite the controller core in 64-bit code.  But, knowing my source, it may all be fiction.
    The RAID Array you say is up and running, are the drives full specification SATA 2.5 in other words do the both have 3Gb/s speed and NCQ.  If you send me the full part numbers I will check the specifications a get back to you.  Because if you have nVidia RAID 0 Array you working you will be the first to have done it and there about 230 people around the world that would like to know how you did it, even MSI, who's pre-beta nVidia RAID Drivers that will work with BIOS V1.B for 32-bit Windows only and nothing for Windows XP 64, would like to know.
    Roger

  • Problem with Area  Chart

    Hi EveryOne,
    Me having problem with area chart,i have taken 3 area series
    to plot when me plotting the values one of the series is getting
    overlapped,Why its happening like this? Me attached the code
    Thanks in advance.
    <?xml version="1.0"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml">
    <mx:Script><![CDATA[
    import mx.collections.ArrayCollection;
    [Bindable]
    public var expenses:ArrayCollection = new ArrayCollection([
    {Month:"Jan", Profit:0, Expenses:0, Amount:450},
    {Month:"Feb", Profit:5, Expenses:0, Amount:600},
    {Month:"Mar", Profit:5, Expenses:5, Amount:300},
    {Month:"Mar", Profit:0, Expenses:5, Amount:300}
    public var expenses1:ArrayCollection = new ArrayCollection([
    {Month:"Jan", Profit:0, Expenses:5, Amount:450},
    {Month:"Feb", Profit:5, Expenses:5, Amount:600},
    {Month:"Mar", Profit:5, Expenses:10, Amount:300},
    {Month:"Mar", Profit:0, Expenses:10, Amount:300}
    public var expenses2:ArrayCollection = new ArrayCollection([
    {Month:"Jan", Profit:5, Expenses:0, Amount:450},
    {Month:"Feb", Profit:10, Expenses:0, Amount:600},
    {Month:"Mar", Profit:10, Expenses:6, Amount:300},
    {Month:"Mar", Profit:5, Expenses:6, Amount:300}
    ]]></mx:Script>
    <mx:AreaChart id="myChart"
    showDataTips="true">
    <mx:series>
    <mx:AreaSeries id="ara" dataProvider="{expenses}"
    xField="Expenses"
    yField="Profit"
    />
    <mx:AreaSeries id="ara1" dataProvider="{expenses1}"
    xField="Expenses"
    yField="Profit"
    />
    <mx:AreaSeries id="ara2" dataProvider="{expenses2}"
    xField="Expenses"
    yField="Profit"
    />
    </mx:series>
    </mx:AreaChart>
    </mx:Application>

    Seems to simply be a problem with your data. See this
    code.

  • Pdf reader X has problems with small pdf and printer with post script driver

    Hi friends.
    I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
    When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
    When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
    When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
    my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
    But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
    i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
    Can someone help me please.........are there settings in Reader X who can solve my problem ???
    Thank you very much for help!

    put ? after rwcgi60.exe

  • Please tell me what is the problem with this code

    Hai,
    Iam new to Swings. can any one tell what is the problem with this code. I cant see those controls on the frame. please give me the suggestions.
    I got the frame ,but the controls are not.
    this is the code:
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class ex2 extends JFrame
    JButton b1;
    JLabel l1,l2;
    JPanel p1,p2;
    JTextField tf1;
    JPasswordField tf2;
    public ex2()
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    setTitle("Another example");
    setSize(500,500);
    setVisible(true);
    b1=new JButton(" ok ");
    p1=new JPanel();
    p1.setLayout(new GridLayout(2,2));
    p2=new JPanel();
    p2.setLayout(new BorderLayout());
    l1=new JLabel("Name :");
    l2=new JLabel("Password:");
    tf1=new JTextField(15);
    tf2=new JPasswordField(15);
    Container con=getContentPane();
    con.add(p1);
    con.add(p2);
    public static void createAndShowGUI()
    ex2.setDefaultLookAndFeelDecorated(true);
    public static void main(String ar[])
    createAndShowGUI();
    new ex2();
    }

    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class ex2 extends JFrame
        JButton b1;
        JLabel l1,l2;
        JPanel p1,p2;
        JTextField tf1;
        JPasswordField tf2;
        public ex2()
            setDefaultCloseOperation(EXIT_ON_CLOSE);
            setTitle("Another example");
            b1=new JButton(" ok ");
            p1=new JPanel();
            p1.add(b1);
            p2=new JPanel();
            p2.setLayout(new GridLayout(2,2));
            l1=new JLabel("Name :");
            l2=new JLabel("Password:");
            tf1=new JTextField(15);
            tf2=new JPasswordField(15);
            p2.add(l1);
            p2.add(tf1);
            p2.add(l2);
            p2.add(tf2);
            Container con=getContentPane();
            con.add(p1, BorderLayout.NORTH);
            con.add(p2, BorderLayout.CENTER);
            pack();
            setVisible(true);
        public static void createAndShowGUI()
            ex2.setDefaultLookAndFeelDecorated(true);
        public static void main(String ar[])
            createAndShowGUI();
            new ex2();
    }

  • Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Hi Chhayank,
    the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
    Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
    ~Florian

Maybe you are looking for

  • Iweb 08: Media now missing after update

    We installed Iweb 08 last week, and now little by little we are finding bugs here and there. Layouts become randomly warped and Video content that was published does not show up once uploaded to the website. The file is not even in the directory, jus

  • Can i safely buy an ebay battery from hongkong?

    Living on a boat, power is always an issue and the 12v problem hasn't been solved by anyone yet!! I want to buy a second battery so that when I am running a generator to charge other batteries I can stock up and have more usage of my laptop. A new on

  • HT4061 How to activate Nike+ipod in my iphone 5S

    Dear All, I want to activate nike+ipod app in my iphone 5s, but due to some reason which i don't know I enaable to activate nike+ipod application. Please do the needful... regards Viral Umate

  • PC & MAC's on a network, disconnect issues, AT WITS END, PLEASE HELP!!!!!!

    HI everyone... This problem has me broken and utterly confused. I'm somewhat of a newbie to MAC, so I still have a PC my girlfriend uses that is wired to the router. She also has a gateway laptop w/ wireless card. I've seen the promised land and am t

  • How to update values in the table control at  Cat2 transaction,

    Hi, i am working on cat2 transaction, here i am using the exit_saplcats_006 and updating values at catsdb table, but i want to display this values at the table control in the cat2 transaction.    can any one provide me solution for this same. Regards