My iphone is unlocked I was using it but one day tried to restore and since than its just showing apple logo on screen and phone is dead it does not get verification for serial number and imei from apple

Hi
My iphone became dead apple not verifying its serial no not the imei so should I throug in dustbin

If it was officially unlocked by the carrier it was originally locked to, then it should have been fine.
If it was hacked in any way to make it function as if it were unlocked, then upon restore the iOS firmware failed to re-install correctly and it is now a brick - so in that case, yup, might as well toss it in the trash.

Similar Messages

  • HT3053 i did some thing wrong that makes my mac just showing a black screen and amessage says you need to restart your mac .... etc and i wanted to talk to any one from apple and i couldnt get my mac serial number and i could do nothing i turned to some o

    i did some thing wrong that makes my mac just showing a black screen and amessage says you need to restart your mac .... etc and i wanted to talk to any one from apple and i couldnt get my mac serial number and i could do nothing i turned to some one who formatted the hard desk and i tried to talk to any one from apple but it seems no one care i spent 4 years to be able to buy this mac and i dont know what to do > i will never buy mac again please some one tell me what to do dvd is not working i press on options and nothing happen what showld i do ? through it ? some body tell me what to do or where to go

    Just to make certain, you inserted the original installation disk and started the MBP holding down the C key?  Did the Optical drive reject the disk or did it just spin?  If the former, the lens in the drive may be dirty and needs to be cleaned.  If the latter, you will have to take it to an Apple repair facility.
    Ciao.

  • I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks

    I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.

    Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
    http://support.apple.com/kb/TS1567
    More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495

  • Trying to install Lightroom CC on second computer ( I have monthly paid account for CC)- when launching get asked for serial number - what do I do next?

    Trying to install Lightroom CC on second computer ( I have monthly paid account for CC)- when launching get asked for serial number - what do I do next?

    Ask for serial number http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

  • Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation

    Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation, what to do?

    Thank you Bill. You could help me with the answer and the one in the other forum:
    "Acrobat has a separate installation process and needs to be activated with your Adobe ID I think. The question on CC is really one for the folks in the CC forum (Adobe Creative Cloud), not the Acrobat forum".
    I could resolve things with Adobe CC. I don´t need my old Acrobat 8, but I could finally install Acrobat XI Pro - and this time it seems to work, without permanently crashing down.
    Thank you.

  • Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation

    Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation, what to do?

    Moved to Acrobat Installation & Update Issues

  • I am part of a family sharing setup.  Can I have my own payment method so the organizer does not get charged for my purchases?

    I am part of a family sharing setup.  Can I have my own payment method so the organizer does not get charged for my purchases?  If so, how do I set this up?

    Yes.  Just redeem gift cards so that your own account always has a sufficient credit balance.  Here is how it works:
    Family purchases and payments
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

  • Indesign suddenly asking for serial number and rejecting the one I have

    Hi,
    This question is very similar to that of act_writ from 19/10/2014 ("Sudden trouble opening InDesign - serial number rejected")
    - I am asking again because that question was not answered.
    We have InDesign CS6 on a Mac, purchased last year with a student license. It always worked and opened the program without asking for a login. All of a sudden yesterday it asked for a login and the serial number, but it rejects the serial number I have received when purchasing the product.
    I am still a student so it should not have expired.
    Any help would be appreciated - I am pretty desperate as the customer support agent I contacted could not help me.
    Thanks!

    A serial should be ok if it was ok.
    Exceptions are: If the serial was used several times in a way which is causing doubts of its legal use, then will Adobe deactivate it (e.g. use of several serial in connection with illegal copies) or when Adobe shuts down the activation server as it was done with CS2, but the user could replace it with a common serial.
    Normal, with a running program it will never ask for a serial, only if the user clean up his computer and delete some folder and files where activation files are hidden. But in that case the serial should be inserted with the next start or in the wort scenario you might uninstall all programs and install them again to be able to enter the serial.
    For non English (including UK and US and International) versions users the serial can also fail when the localisation files are deleted.
    Maybe that you exchange the serial with some other number or a number from another product which was bundled?

  • Photoshop cs3 extended asking for serial number and activation after having the program for over 5 years now

    for some reason the program out of the blue is asking for a serial number and activation.  I can't find the case anymore.  does anyone have a way I can contact adobe directly to see if they can help me solve this problem. 
    Everywhere I look points me back to the forum or troubleshooting menus.
    thanks

    It may think you have a different computer if you've changed some of the hardware recently.
    Did you purchase the software as a download or register it with Adobe?  If so, your serial number may be available from them directly.  Click first the red A logo at the top of this page, then drill down through [Manage Account] to see the products they have on file for you.
    If you've physically lost your serial number and never registered it with Adobe, it's like losing a wad of cash on the street.  You're responsible for holding onto your valuables and no one's going to step up and replace it for you.
    The Creative Cloud Photographer's Bundle subscription package is still available for $9.99 a month, as far as I know.
    -Noel

  • Redemption Code for PSE11 does not work - cannot obtain serial number

    What do I do if my Photoshop Elements 11 Redemption code doesn't work? I am trying to find a proper contact number and I can't. I need to use this code in order to get the serial number and install the product. Does anyone one have a solution? or a phone number?

    Redemption Code Help
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • Moving Average Price does not get updated for Project Stock

    Hello Experts
    We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
    While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
    Problem:
    while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
    Question:
    How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
    Your help is kindly appreciated.

    I'm sorry for the confusion
    Case:
    The T-code is CJ20N Project Builder in PS module
    we are assigning material components to network activities under a certain WBS element in the project.
    there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
    The costing variant has a valuation variant which lists a series of strategies  to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
    The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
    The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
    This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
    This way the system will never get the MAP right.
    However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
    In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
    My Suggestion is:
    Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
    which is the MAP for both plant and project stock together, since that we are going to use both.
    Q: Is this correct !?

  • Encore suddenly askes current CC subscriber for serial number and doesn't work

    I am a long time and current CC subscriber. Yesterday, Encore CS6 worked. Today, when i click to open Encore and the program prompts me to enter a serial number or "quit". There is no other option.
    All my other apps are current and work: Ae, Pr, Ps, Mu, Ai, Au, ect, ect. All but Encore.....
    Any CC subscriber knows that our subscription doesn't come with a serial number. So I am left wondering why my program worked yesterday and today it doedsn't work. Mind you, nothing has changed between the the time i left my computer to the time i returned. No updates, no new installs, n o t h i n g.
    So I follow my first instinct to search google and bing and I find that this appears to be a common problem with no soultions short of re-writing and deleting all kinds of crazy files that honestly just look unscrupulous and only meant to really screw things up worse for the person having the problem.
    So, next I follow the walkthrough at adobe's link here: http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html    It didn't help me because it doesn't address the problem. All my other apps work so obviously my address, email, and payment options are up to date.
    Next, I click live chat at 6:00pm pst and I am bounced from one guy to the next until at 7pm pst i get the message... "Sorry to hear that your application will not work. Please contact the more experienced tech team later as they are offline."   WHAT?!?!?! No solution, just, "Your problem happend at an inconvenient time for adobe so come back later." And no mention of when that time will be. THAT is NOT CUSTOMER Service. This so not cool, moral, or right in any universe. Just leave me hanging. I can not put in to words how upset I am right now. Adobe has really let me down.
    When my clients have problems, I deal with it right then and there and I don't leave until it's fixed and done. I may jump ship on this one.

    Richard, I tried "run as administrator" to no avail. However, I was able to get in touch with a adobe tech today. After getting passed to about 3 or 4 different techs, one was finally able to assist me.
    The tech had me open Pre Pro CC and go to "help" and click "sign-out". When you do that a pop-up appears saying that: signing out will deactivate the following software on this computer unless you sign in again; following with the icon for each Adobe CC app i have installed.
    Next the tech had me open Pre Pro CS6, which upon opening askes you to sign in which I did. Once Pre Pro CS6 was open, The tech had me check under "help" to see if the the option "deactivate" was available or greyed out. For me, It was greyed out.
    Next the tech had me close Pre Pro CS6 and open it again and check "help" to see if deactivate was still greyed out; and it was still greyed out.
    Next the tech had me close Pre Pro CS6 and open Pre Pro CC which prompts you to sign in. After Pre Pro CC launched the tech had me close it and open Pre Pro CS6 again too check under the "help" tab again and confirm if "deactivate" was still greyed out or black (executable). This time "deactivate" was black.
    Next the tech had me launch Encore CS6 tto see if it still required a serial number. This time Ecore opened as it should, without requiring a serial number.
    Hopefully this stick, or Adobe includes a perminant solution in the next update.
    I Hope this helps others with this same issue.
    Thank you again Adobe for helping me!

  • How do I load my hubby's backed up contacts from itune to my phone with his new sim - itunes is registering my serial number and wants to load my contacts

    We are fairly new iPhone users and my hubby lost (misplace he says) his iPhone but we had an another phone (not iPhone) and want to load his contacts onto a new SIM  that he can use on that phone. We have changed his phone number to the new sim.   I thought if I put his SIM in my iphone I could go in & add his backed up contacts onto his Sim but can't see how I can direct iTunes to do this as it must be looking at the phone serial number instead of the phone number which I was hoping it would do.  I wants to back up & sync my contacts/info to his new SIM?  Is anyone able to tell me how I can get his contacts onto his SIM without a new iPhone?
    Thanks for your help.
    Jacki

    No contact information is stored in iTunes. Contact information is synced through iTunes to a supported contact application on your computer: Outlook, Windows Address Book, OS X Address Book. Unless you own a sim card reader/writer, you're gonna have to manually enter these contacts directly on the phone.

  • I have install adobe xPro but it is asking for serial number and this has not been issued to be

    Dear Colleagues,
    I have installed the adobe acrobat X1 Pro but it is asking for a serial number that is not issued to me.
    How can i get a serial number for this trial document

    Trials don't use serial numbers. If it asks for one, then the trial has self-destructed and there is no way to revive it unless you buy it.
    Adobe trial software expired early
    Mylenium

  • CS masters is activated but still asking for serial number and stating it's invalid!

    I recently used fireworks, but at startup it suddenly asked me for my serial number for CS6 master collection. upon entering the serial number it states that this is invalid!
    This is unacceptable. I tried reinstalling, but this does not help either.
    How can this be resolved?

    Error "The serial number is not valid for this product" | Creative Suite

Maybe you are looking for