My iphone just shut off and I cannot restart it and when I plug into my computer dock it says it has detected an iphone in recovery mode? What do I do???
my iphone just shut off and I cannot restart it and when I plug into my computer dock it says it has detected an iphone in recovery mode? What do I do???
You'll have to restore it. See http://support.apple.com/kb/ht1808.
Similar Messages
-
I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with ITunes." I just updated it and now I have to restore it??! I don't wanna lose all my things on my ipod just for a stupid update! Please someone help!
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download -
I try to update IOS 6 to my ipad 2/ wf/3g and after about half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can everyone help please. In the screen of iPad appears the itunes Logo and the cable of connectios. Can't do nothing!!!
Click restore in itunes.
-
after itunes finishes restoring my ipod touch 8gb, itunes still says itunes has detected an ipod touch recovery mode. You must restore it before using it with itunes. and i dont know what to do
Are you sure it is 1043? I've never seen that error before. But you can try disabling your security software, connecting the phone to a USB port directly on the computer (not a hub), and trying to restore again.
-
I did a backup on my iPod touch last night and it said it worked...I wanted to make sure my 1100 pictures and videos, mostly of my son, were safe since we rarely use the iPod touch anymore since we bought an iPad...I can't find them or I have no idea how to access them...I do not have a MAC...I have an HP computer with windows...
Now when I try to use my iTunes a message comes up that says my iPod is on recovery mode and has to do a restore to use my iTunes again...so when u click on that it states that pushing that button will restore my iPod touch to its factory settings...which means I will lose all my data...which I CANNOT do bc the videos of my son are some of his first words, first giggles, etc.
Now my iPod is stuck on a screen with a picture of a USB cord and an iTunes icon... and holding the power and push buttons down at the same time does nothing except bring up the apple icon for a moment and then it goes right back to the USB and iTunes icon
When I called Apple they said in order to talk to tech support I had to pay a fee of 19 dollars...which I think is kind of crap...I paid over 300 dollars for this and all I want is somebody to help me access my pics...I have done nothing wrong...this iPod was never dropped and never broke...I did the backup like I was supposed to and now I have an IPod touch that does nothing, and if my library of pics and videos are on my computer, I have no clue where or how to view them or back them up onto DVD....
I'm very upset and frustrated...please help!!!You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
Wont restoring the iPad wipe it? Yes I have things in the cloud but still... why on earth would Apple REQUIRE a complete restore. Im afraid to even do it now because I do not want to lose many many pictures of my little boy, apps, videos and al lthe work Ive done to personalize this ipad.
Someone please let me know whats up!
Thanks.During a normal install of iOS 7.0.6 this does not happen but something clearly went wrong in your installation.
To fix this, connect to iTunes and restore to Factory. Hopefully your iPad will be working again and you can restore your iCloud backup during Setup. -
When I havent got my ipad connected to a power supply I get an image on my ipad of the usb cable with an arrow pointing to a itunes icon and no matter what you try and do iyt stays on that for a few seconds and then switches off the ipad, connecting it through usb into itunes on my PC (XP) this image says on the screen but I get a message on itunes saying itunes has detected an ipad in recovery mode and mneeds to be restored - when I fire off the restore through itunes after a few minutes it comes back and says it cannot restore and give an error message 1603. I have also repeated the process through my wife's laptop (Vista) and get the same situation -it is an 32GB Ipad 3 purchased last November - any ideas ?
Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Why would my iphone just shut off and now not turn back on?
Why would my iphone just shut off and now not turn back on?
Thank you, I tried it and it worked!!!
-
my iphone just shut off and when I put it on the computer dock it says the iphone is in recovery mode
OK. So something went wrong. Restore it and see if it happens again.
-
My iphone just shut off and it won't come turn back on?
My Iphone just shut off and it won't turn back on...help?
Also... see this Discussion
https://discussions.apple.com/message/19521062 -
My iPhone 4S shut off with a 62% battery life and hasn't came back on yet. I've charged it and all it just won't come back on at all. Is this a common problem? Is this covered under my 1 year warranty?
No it is not common.
Most have no issues.
Have you tried basics from the manual? Restart, reset, restore?
The warranty covers defects. If the iphone is defective, then they would replace it. -
my iphone just shut off and i put it in charge it wont turn back on before it shut off the batery was 50%
Connect the iphone to itunes. Does your computer recognize the iphone? If it's detected and seems ok, just let it sync, charge and do its thing, maybe overnight or something. if it doesn't turn on and/or isn't detected, take it to an apple store, there is something wrong with your phone (or if you don't live near one, just try calling apple and hope they know something). If it seems okay, and the same thing happens again, restore the iphone; and if it is still having problems, bring it into the apple store or call tech support.
-
IPhone 4 turned itself off and I cannot restart, restore, and I've charged it overnight. Suggestions?
iPhone won't operate under 0°C.
At page http://www.apple.com/iphone/specs.html you can see environmental requirements:
Operating temperature: 32° to 95° F
(0° to 35° C)
Nonoperating temperature: -4° to 113° F
(-20° to 45° C)
Relative humidity: 5% to 95% noncondensing
Maximum operating altitude: 10,000 feet (3000 m) -
iPhone 4, stopped 6.0 upgrade in the middle of install, and now I just get the blinking apple. Can't even get it to restore or recognize my phone when I plug into the computer/itunes....
Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore
-
My iphones and ipods no longer show up as devices when I plug into my computer to use itunes
Does anyone know why my iPhone and iPod no longer show up as devices when I plug into my computer to use iTunes?
Hi jacquelinex,
Welcome to the Apple Support Communities!
If your devices are not showing up in iTunes I suggest your read over and follow the troubleshooting steps in the attached article.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Have a great day,
Joe
Maybe you are looking for
-
Adobe Reader 8.1 verses 6.0
I have been using 6.0 for years. Each time I received an email with attachment as a PDF a flash would come up to intall updates. After the 500th time of getting the notice, I finally aggreed to get the updates. I have installed 8.1 twice, I have gone
-
Wagetype calculation not coming correctly
Hi Whenever we run a transfer action in between the payroll period wagetypes which we have maintained in 14 Infotype are not calculating correctly. Ex: Performance pay wagetype is there Amt is Rs 1000 start date 01.04.2008 and end date 31.12.9999. I
-
I can not sync ipod due to 6gb of 'other', how do I get rid of this?
I can not sync ipod due to 6gb of 'other', how do i get rid of this?
-
Sorry in advance for cross posting, but the Forum Admin for "SharePoint 2010 - Setup, Upgrade..." recommended I post this here as well. Running "SharePoint 2010 SP1" and "SQL Server 2012" Integrated Reporting Services. Assuming a total Farm failure r
-
Basic authentication of a WebService -- Possible?
Hi All, I have a web service that's defined like this: <mx:Webservice wsdl=" http://username:password@intranet/webservices/myservice.asmx?WSDL" /> username and password are replace with the username and password used by IIS's basic authentication sub