My iPhone when put on to charge, it just charges then stops, charges then stops about every second

When I put my phone on charge it is been crazy.
It charges then stops, charged then stops every second. It is driving me mad and is going to run out of life eventually.
Any solutions??

My phone has the latest firmware, It is a replacement phone as the one I had until last week broke down and Orange replaced it.
It started doing this after using it for a few days, I discovered last night that i could only charge it from the PC i am using. We have 3 iphones in the house and a ipod touch and everything else works fine with all leeds both in wal and on the Pc and my Radio alarm clock docking station.
Unfortunatly while writing this it has also started  while charging on PC, I am jinxed as my last unit broke down and would not charge at all either and was told by the guys and the genius bar that it had totally malfunctioned and was unable to be fixed.

Similar Messages

  • After updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

    after updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

    Reset your iPhone.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
    If you continue to have issues, try downloading the apps to iTunes on your computer, then sync your iPhone using iTunes.

  • TS1814 I have a 4th gen. IPod Touch with IOS4 and i want to update it, but when I hit the Update button its says "contacting the IPod software server" and then after about 5 seconds it says "ITunes could not connect to the IPod software servers". Please h

    I have a 4th gen. Itouch wiht IOS4 and i want to update it, but when i click the update button in ITunes it says "contacting IPod software server" and it looks like it is loading. However, after about 5 seconds it stops and says "ITunes could not connect to the IPod software server". I found the apple webpage that is supposed to help me, but when i went to the LAN settings in the control panel i found that 'Automatically detect settings" was already checked. I do not know what to do, Please help.

    If yo mean the iPod will not connect to your wifi network:
    Does the iPod connect to other networks?
    Do other devices now connect?
    Try:                  
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS1424 When I try to watch a rented movie from ITUNES ver 11 on my WIN 7 64 bit PC...the movie starts then after about 30 seconds I receive the following error "Itunes has stopped working"

    I downloaded and rented a movie from ITUNES ver 11. I'm able to run the movie but after about 30 seconds I receive an error.
    "Itunes has stopped working" A problem cause the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Windows offers me to down load ITUNES WIN 7 64 bit, I have uninstalled and reinstalled the 64 bit version...no joy... I have run the repair option and still nothing.. Any suggestions???
    Regards, Steve Tipton

    I'm expreriencing the same conditions with the same environment.  Windows 8, iTunes-64 11.1.2.32, iTunes Store with a processing bar up to 80 +/- and the POPUP MESSAGE OF "iTunes stopped working. The error ...."
    I UNINSTALLED, iTUNES WITH NO POSITIVE RESULT.  I CHECKED THE FIREWALL AND IS THE SAME DEFINITION AS THE PREVIOUS ITUNES VERSION.
    My iTunes StoreS from my iPhones ARE OK.
    I'm spending a lot of time of research for WINDOW'S iTUNE with no solutions.... 

  • Is it ok to using iPhone when it's fully charged and plugged in?

    I wonder if after my phone is fully charged and still plugged in, can I use it normally? Does it harmful to the phone and battery?

    leon_123 wrote:
    So, if it use from battery and then filled by charger continously, I don't think I should do that for a long time.
    No worries.
    Read here for info on battery: http://www.apple.com/batteries/

  • I'm having issues booting up my MacBook Pro. When I turn it on, I get the sound and the apple logo with the spinning wheel, then a loading bar appears, then after about 30 seconds it shuts off. Suggestions?

    I believe it's OSX 10.7.5 or .4, can't check now. I'm not able to boot up past the login screen. A bar comes up below the apple logo as if it's installing an apple update, but doesn't make any progress. Eventually, the bar goes away and just the apple logo and spinning wheel are there, then it just shuts off soon after. I've tried holding shift key on power up to enter safe mode, but nothing happens.  Any help/ suggestions would be greatly appreciated. Thanks!

    You can't backup without booting the computer unless you remove the drive. But it may be you have a more serious hardware problem, so I think you may be better off taking it in for service.
    But here's what you might try since you now have an external drive.
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your drive's main entry (topmost one) and click on the First Aid tab, then click on the Repair Disk button. This will fix the boot block if it's damaged. Next, select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button.
    If you have no problems with the above, then quit DU and return to the Main Menu. Select Restart from the Apple menu. See if the computer will boot properly.
    If you get this far you should backup the drive ASAP. You will need to prepare your external drive:
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

  • I have an ipod 4th generation and it has currently got the software version 4.1 and when i try to download and update my ipod to the most recent version and when it's done downloading it just ends with an error saying connection error every time!?

    This happens every time and it always happened when it's processing the file and everything else downloads fine like apps etc but this is the only problem i have. I tried things like increasing the amount of space available on my pc but nothing seems to work. Please help me as I've had my ipod for about 8 months now and haven't been able to update a single time

    Disasble the computer's security software during the download and update.

  • I transfered my music to my new computer and when i play a previously purchased song it stops about 40 seconds before the end of the song...can anyone explain this to me?

    I got a new computer so I transfered all my old music to my new iTunes. When I play a song I have purchased on a previous computer, the song stops playing after 40 seconds or so before the song ends. What's the deal?

    Does the track play correctly in Quicktime Player?  If it does then it is an iTunes issue.  If it doesn't then it is possible the file was not completely downloaded, or is corrupt.
    https://discussions.apple.com/thread/3712298 - applying system update cleared issue of songs ending early
    Solution to purchased songs not playing (2009) - http://discussions.apple.com/thread.jspa?threadID=1934256 - authorization issues and files not playing all the way through
    https://discussions.apple.com/message/17382022 - Problem was incomplete files due to poor WiFi connection
    https://discussions.apple.com/message/17661693 - issue resolved by re-downloading files or rebuilding library file [note, although the poster says this restored all, my understanding is the .xml file does not retain all the details of the original library file].

  • When I try to install a app it comes up as waiting then in about ten seconds in just disappears help me!

    When I try and install an app it just says waiting for a little bit then it just disappears and doesn't install

    Have you tried resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • My iphone 5c screen went out and its just a black screen ive tryed a hard reset and nothing still when i plug the charger in it dings and ive hooked it to itunes and restored it still nun do i need to buy a new screen or is something else wrong?

    My iphone 5c screen went out and its just a black screen ive tryed a hard reset and nothing still when i plug the charger in it dings every few secs and ive hooked it to itunes and restored it still nun do i need to buy a new screen or is something else wrong?

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • Hello, I would just like to report the little problem with the apple store. When I try to download an app it loads for about 2 seconds and then it stops downloading! I don't know what's wrong

    Hi, when I try to download an application the app stores downloads it for about 2 seconds and then it stops downloading it! I don't know what's wrong?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... (But can take Longer..)
    Release the Buttons...
    If no joy...Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

  • In the edit screen when switching between photos, it starts clear and then after a second, it becomes a little blurry.  Any one else experiencing this?

    In Iphoto, when in the edit screen, when the photo first comes on it appears clear, then after about a second, it blurs a bit which makes it hard to edit.   This does not happen when previewing each photo, only when editing.
    Anyone else have this issue.

    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • Okay, so my friends music downloaded to my iPhone when i put it on his computer to charge and i re-synced it to mine and all his music is still there but blank and wont play how can i get it off of my phone, its so annoying!!

    Okay, so my friends music downloaded to my iPhone when i put it on his computer to charge and i re-synced it to mine and all his music is still there but blank and wont play how can i get it off of my phone, its so annoying!! My itunes only has like 4 songs because my computer crashed and lost all my songs, and I'm not trying to steal his music. But like I said its still in the music app on the phone but its all blank and wont play. I just want it off.

    When he plugs it into his Mac again, he should be asked if he wishes to sync with that Mac.

  • Hey have a problem my iphone 4 die on me when i put it to charge it wold show a dead battery and gets really hot please help me

    hey my iphone 4 need help please help me

    my phone die and when i put it to charge it only show a dead battery and the phone gets really hot

  • My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

    My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

    DFU mode an try to restore to iOS6.1.4 it will wipe out the whole device if it works but than youll kno if its a software issue if it works or ahardware issue if it dont work

Maybe you are looking for

  • Drag and Drop in JPanel having GridBagLayout

    Hi, I have a JPanel (longitudinal) which has labels with imageicons (actually they are created using javax.media package and other JAI packages, but for simplicity sake labels are good). These labels are arranged longitudinally one below the other. I

  • Adobe Connect Android app issue

    The app failed during job interview, simple chat wouldn't work, no official support available. Read report at expofair.tv/portfolio/brendaflinn.html. Report available Oct 4. Message was edited by: Ashish Gupta to make it more readable.

  • Exporting 24 fps avi to MPEG2 makes it 29.970 fps?

    I just exported a 23,976 fps avi to MPEG2 choosing MPEG2-DVD 23,976 fps progressive and now when i check the new m2v-file in MediaInfo it says 29,970 fps. How could that be? I know i chose 23,976 fps in the media encoder so that's not it. Anyone have

  • Steps to be followed in Export/Import

    Can anyone help me out defining the exact steps to be followed in exporting and importing the ODI objects? I have exported the master and work repository. I created a new master repository by importing the zip file. I can see the architecture neatly

  • How change computer lenguage

    I already went to system preferences, lenguage and text, selected the lenguage, closed the box, and restarted the computer..... the lenguage didn't chenge.