My iPhone will only operate when connected to the PC, 2 minutes max after I disconnect it, the screen reverts to black with the apple logo and then completely black. Restoring makes no difference; any ideas anyone? en
my iPhone fell on the floor yesterday; now it will ony operate when connected to the PC - then it works fine. If I disconnect it from the PC, the screen reverts to black with the apple logo, eventually completely black; iPhone is unresponsive until reconnected to PC. Any ideas anyone?
You broke it.
It's time to find yourself a competent 3rd party repair shop or just buy a new phone. I believe you can get an out of warranty replacement from Apple for $149 (not absolutely positive they still offer them for the 3G), but given the age of the phone and the cost, a new one might make more sense.
Similar Messages
-
I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?
Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified. There is nothing wrong with my apple id and I do not want to change it.Any suggestions?
Debi....
Try "resetting" your Apple ID password > Apple - My Apple -
When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it. Called Apple tech and they did not have a solution. Any ideas?
Try these places:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
TimeMachine 101
https://support.apple.com/kb/HT1427
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718 -
My iPod no longer appears as folder/file in Itunes when connected. Library, genius, playlists, etc. are present, but there is no longer cross reference with the iPod itself. Help!?
I just tried it again and this time a different message showed up "The iPod 'name' cannot be synced. The required folder cannot be found." I have no clue what folder it could be talking about.
-
I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?
Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
Run through this list of fixes
Step by Step to fix your Mac -
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead? please i really need help
Did you try to charge it using the adapter or your computer?
If you can, let it charge for about 15min, then connect in recovery mode, described in this article:
iOS: Unable to update or restore
If still not luck, your battery might have to be replaced:
Apple - Support - Service Answer Center -
When I power up my 2008 Mac Pro I get the "welcome chime", fan comes on, a light comes on on my Apple moniter and then nothing - black screen. What,s going on?
what you describe as the "welcome chime" is the indicator that your Mac has passed the Power-On Self test, and if a suitable source of software can be found, booting is likely.
If the screen stays dark, the most likely explanation is a graphics card failure. But it could also be caused by a backlight failure in the LCD, so be sure you try shining a bright light at the screen to be check whether the picture is there, but just not illuminated.
Graphics card failure will end the boot-up process in some cases, and not have an impact in others. Two external indications you can use when your display is not working are: The Caps Lock key, which is under the control of Mac OS X, and the Control-Eject dialog box shown below. Note that the default is Shutdown, so a Mac that shuts down in response to Control-Eject followed by Return is working fine. -
Ipad air wifi only 16gb worked ok with IOS 8.0 . just did upgrade to 8.02 and now it will not boot up. I get a white screen with the apple logo and then a blue screen. it does this over and over. I need help. What do i need to do. Please help.
Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, restore the iPad > Back up and restore your iOS device with iCloud or iTunes -
For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free
If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge. If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars. -
My Iphone doesnt start normally it turns on, shows the apple logo and then turns off again but only while its charging. Before it turned on completely and i saw the charging tag that it was chraging normall but then it turned off again? I have tried totall reset nothing works! Im lost please help!
Try this to help
http://support.apple.com/kb/HT1808 -
I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn
I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.
Maybe you are looking for
-
NVIDIA GeForce 8600M GT No video, need help getting repair under extended 4 warranty
My macbook pro A1260 (early 2008) suddenly wont boot up - there's no chime or video, just all of the other usual signs of like such as the drive and fans spinning. Tried all the usual resets and checked the RAM was seated properly but no luck. I had
-
Adjusting Space between table - cell border and cell content ?
Hi all, Need a quick help. I am using a static table. By default, I have some space between the cell content and the text (yes, the cell margins). I wanted to reduce this space to '0'. Is there any option to adjust the cell margins? Thanks in advance
-
I'm getting a kernel panic on startup after restore hd
Long story made short...installed Google Music to use with my new phone...next day Mac running slow, left it running while I was out, came home to frozen screen...booted in safe mode and clicked off everything that was running in background. Tried to
-
Hi! I have a problem. Developer options/ desktop backup password I don't know this password. How to find deskop backup password? pls help
-
Re: Tecra A10 - Can I install Windows 7 64bit?
Hello Toshiba & Forum I want to buy a Tecra A10 1GV, but always Toshiba delveres the Notebook only with a 32 Bit Windows 7 Prof. In my eyes seems that like a Ferrary with a steam-engine. The recovery version sometimes offer 32 and 64 bit Installation