My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.
My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.
Hi,
Time to take your iPod in for service.
You can make a Genius Bar reservation in advance if you are in the U.S.
http://www.apple.com/retail/geniusbar/
Carolyn
Similar Messages
-
my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?
- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore -
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in
Select setup as "New", the next screen should prompt you to rename your phone. Just name it what you already have it named. After that, you should be able to sync and all of your data & settings will still be exactly as you've already set them up on your phone. The message is more threatening than what really happens.
-
hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you
hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer -
Hi, I've reset my 2nd generation ipod touch. However,the connect to itunes graphic appears on the screen but when I attach to my powerbook it doesn't show up either in itunes or finder. I can't be the first to have experienced this problem. please could someone advise me.
What iOS do you have on the iPod?
Did it every connect to your computer with that iOS?
The latest iOD for the 2G is 4.2.1 and that required a Mac with 10.5.8 or later.
Have you tried:
- another USB port and cable
- iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log
Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-
My husband has an SD card he uses for his trail camera. We put it in our mac book pro and can look at the pictures but when I go to move them to the trash it tells me that the files can't be moved to the trash because they cant be deleted. I have Nikon camera software on my mac and it pics up and asks if you want to import the pics and if you want them deleted from the devices afterwards. I tried that but I get a message afterwards that says that some files were not able to be deleted. When I go to check, none of them were deleted. How can I clean of the SD Card? I do have a camera I could stick it in, it would just be nice to know how to do it from my mac. Also, the files are jpg. if that matters.
AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole. -
I have an ipod classic (4/5 yrs old) ,which I syced with itunes on an XP laptop, since destroyed. I have a W8 laptop with a newly downloaded itunes, but, it will not show any trace of my ipod when connected, nor does the laptop. The cable and usb port are both tested and fine. Any ideas.
Hello Ditchblow,
Congratulations on your new laptop! I found an article with steps to address the issue you described:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
I have had my ipod touch 4th generation for a couple months now.... Nowhere in the manuals or help sections does it tell me how to make individual pucture files(like that already on my computer) put onto my ipod touch.... I managed to make one and I can't remember how I did it but when I have the touch hooked up to itunes and try to pick which picture files from my computer to sync, a box always opens and says that it will delete everything in the original photo library that was in there.....
Can anyone help me there has to be away, I know someone has done it but they don't live here to show me!!!!
Please and thanx in advance!!!!!!!where on my computer am I suppose to make the individual picture files and have them to upload on my ipod touch.... I do have a photo library on my computer, but in the photo tab in itunes for the ipod touch and there is nothing checked for syncing, cause when I do check it it always says its going to replace everything i have in my photo library on my ipod touch..... So how am i suppose to have it checked and have it NOT replace pictures on it????
Also I cannot make more photo albums into my ipod touch, it just replaces the one album every time....
I am very frustrated cause I have tried the manuals and the apple support help etc and nothing pertains to my exact issue.....
Please if u could elaberate I would appreciate it alot.....
thank u -
my Ipad won't recognise my printer. It is connected as I have typed the IP address into Safari which confirms connectivity. Spoken with canon who suggest it it is a problem with IOS not recognising the functionality. When I try to print it says cannot find any air printers. Printer is working via LAN set up on my laptop. Don't want to have to spend £25 to speak to an apple support team. Has anyone else experienced this problem. Printer is a canon MG 3250.
A few things you could try:
Reboot your modem/router.
Turn your printer off then on again & make sure it's connected to the network.
Reboot your iPad holding down the home & sleep/wake buttons simultaneously until the apple logo appears then release & let the iPad boot up normally.
Try going into Settings on your iPad & select General->Reset->Reset Network Settings.
Also, have a look at this:
http://www.canon.ca/support_images/KB_Images/Shared_wifi_documents/How_to_Print_ Using_Apple_AirPrint_NEW.pdf -
I have recently upgraded our Choir's website, and used iWeb to create the upgrade. It was previously done with other software.
Now, when I go to the site, (comc.ca), the first page comes up fine, but when I click on the links to other pages, I get this message.....
Parse error: syntax error, unexpected T_STRING in /var/www/virtual/comc.ca/htdocs/Site_3/Contact_Us.html on line 1
I went to an Apple store, (I still have time left on my one-to-one period), but didn't get an answer.
Any suggestions really appreciated.
Thanks,
LarrySorry, but it doesn't help JTANNA.
What is your definition of "more efficiently"? If it's limitation of search results, branded search, and limitation of styling your results then google search is more efficient. Real developers rely on their own developments. For example: how can google search display results from a password-protected site? They can't.
best,
Shocker -
I have reset my router multiple times, and I was connected to the internet just fine before. I have a booster and it was working great until yesterday when it said I was connected to the internet but everytime I tried to load safari it said I wasn't connected. It is working while I am using the hard-line, but I am wondering how to fix the Wi-Fi. I have also reset safari, cleared the cache, and recieved every update.
ThanksI too am experiencing an EXTREMELY slow connection to the internet when my PC comes out of sleep. When I check/troubleshoot the connection, I have all green lights, indicating I should be able to get on line, but it takes about 4 or 5 minutes before I can do so. It seems that this problem started shortly after the iCloud (or i Could as another poster said) was loaded. I know its not my ISP, because my wife, who works on an IBM machine gets right on, no problemo. Is there something going on with either the recent update or the i Could (use to be able) addition? Defective software?
TIA for any response.
ME -
As I said, It's now frozen and I cannot use my iphone basically. WHen I turn it back on, it goes to the facebook screen. It doesnt go the the lock screen first. I've tried to shut it off but thats kinda hard because my lock button is broken. Please Help!
You need to reset the phone, but that requires a functioning on/off (lock) button. Time to visit Apple.
-
i was playing vortex while it just shutdown. i thought it was just low on batteries so i charged it overnight, then the next day it still wont turn on. i tried to restart it by pressing the play and the select button at the same time but still wont turn on. i tried to plug it and upload some songs hoping that it will restart but still nothing... blank!!!!! help this is my second ipod already in a span of 2years.. help!!
Hi Cris , I had this problem 1 time and it just occured again.
Would love to see someone who knows a solution for this problem.
What happened to mine : I was listening music while playing WoW and after I shut it down it stopped working.
Couldn't use it the other morning and I could'nt upload any songs.
So yes it thought the same as you , plugged it in to see if the battery was low but it wasn't.
I just stopped reacting.
My Itunes doesn't seem to recognise it anymore.
Could anyone give a quick solution or answer to this problem ?
Would greatly appreciate it.
Maybe you are looking for
-
Word and Excel file and folder icons missing in File Open dialog box
Running office 365 on Windows 7 Pro: In Word and Excel, when opening and browsing for files in the file Open dialog box, all file and folder icons are missing. This problem does not occur within Windows Explorer.
-
SARA Archiving Idocs and the retention period , RSEXARCB
Hi Experts I am having few questions on the Idoc Archivng - 1. I want to know the safe retention period for Idocs , I am planning to do archivng of Idocs which are 60 days older or more. How to determine the exact period for Idocs that we can keep i
-
I moved to windows 7 and firefox 12 and my internal website via the servername (not FQN) is now prompting me for the username and password in firefox. I do not get prompted for a username and password when using IE9 to access the site via servername
-
MRP_ATP_DETAILS_TEMP
When an ATP inquiry under ASCP is called it add to the table MRP_ATP_DETAILS_TEMP. Any thoughts on where the messages in the form...such as Planning Time Fence constraint...come from? Users are looking for a dynamic report that returns the constraine
-
Loosing connection ,please need a fix airport extreme on macbook pro
Purchased new in January of this year MacBook Pro ,13 inch,Mac OS X Lion 10.7.4 (11E53) I see a lot of people with this same problem, tried rebooting everything , it a problem with the Mac. the PC laptops work fine .I have the same problem where ever