My ipod makes it were i have to click my power button twice

it makes me click the power button twice to show the screen

You likely have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)                                      

Similar Messages

  • X1 Carbon Touch: have to push the power button twice to boot the system

    This is what always happened when I booted up the computer:
    First time when I pressed the power button, the computer was on for just 2-3 seconds showing the "Lenovo" logo, and then automatically went back to power-off with nothing happened further.
    And then I pressed the power button again, the computer booted and loaded the operating system without any problem.
    Even though I'm able to start the computer in this way eventually, it is very annoying.  It happens every time when I cold started the system (no such a problem if I simply restart the computer).  Anyone knows why I have to push the power button twice to boot the system?  I suspect it's something related to the rapid start technology, but cannot locate the exact reason.  Anyone else has the similar problem?  I have a Windows 8.1 now, but the problem existed when I was still using Windows 8.  After I upgraded to 8.1, the problem still exists.

    Batteries

  • After my MBP's battery runs out, I have to press the power button twice to turn it on, is this an error?

    The grayed out start screen that often occurs after the computer's battery has completely ran out occurs twice on my comp. This screen signifies that the computer is waking up from hibernation, so to speak, and I assume of course. This disconcerts me because I would assume that there would be a single progres bar/loading screen, rather than two. If this is normal behavior, please tell me, and if not, do you have any ideas about what I could do to fix this?
    Thanks!

    Batteries

  • Have to hit source playback button twice, Why?

    Is it just me? For months, in order to playback a source clip, I have to click the play button twice. The first click would only play one frame or so. This is something I have been tolerating for quite a while and never had time to investigate until now. Anyone else with this issue? Any solutions?

    Trash your prefs. Fixes all kinds of strange behavior.
    Use this handy application....just open it and click TRASH, then launch FCP again.
    FCP RESCUE
    Shane

  • I have to hit the back button twice because the history seems to have duplicated a page.

    After clicking on a link to another site I have to click the back button twice in order to return to the first page. If I hold down the back button instead, the history shows that somehow an extra click has shown up.

    I now realize it seems confined to a particular link from My.Yahoo page and therefore must not be a firefox issue.

  • My ipod touch 4gen will turn on but i have to hold the power button.  how do i hix it i need help! ASAP

    I CAN TURN MY IPOD ON BUT I HAVE TO HOLD THE POWER BUTTON OR IT WILL TURN OFF IT HAS BEEN LIKE THIS FOR ABOUT A WEEK OR TWO AND IT IS REALLY ANOYING.  PLEASE HELP ASAP!!!!!!!!!!!!!!!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • HT3302 My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

    My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My ipod classic has frozen. Have tried pressing menu/centre button and resetting, but still frozen. Can anyone help.

    My Ipod classic has frozen. Have tried pressing menu/centre button and resetting, but still won't work. Can anyone help please.

    Helen y s wrote:
    We have tried the usual restart a few times but with no success.
    You mean that you have put the iPod's Hold switch on, then off, and then press-and-held both the Menu and the Select (centre) buttons together for at least ten seconds.
    Have you made sure the iPod is charged?
    If you have tried the Restat procedure (above) three times, have you then tried connecting the iPod to your iTunes Library?

  • I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    MAJOR DEFICIENCY = WASTED MONEY:
    I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • My Power Mac G5 is freezing up. A few days ago my G5 started freezing up, the cursor is unresponsive and none of the keys have any use. I have to press the power button to shut down and then restart. Sometimes on the restart, instead of the Apple logo I g

    A few days ago my G5 started to freeze up while in use. It doesn't matter if in Safari, iTunes, Pages, etc. The cursor will not respond nor does any keystroke, force quit, escape, etc. I have to hold the power button down to shut the computer down. Then, try to restart. Sometimes restart will work and the computer will work for a while and then freeze again. Other times on restart, instead of the Apple logo at start up, I get a Zero with a line thru it, have to power off and restart again. When it does restart, the "spinning gear" takes a lot longer than normal to spin up and take me to the login screen. Have been told it may be my hard drive getting ready to fail. Have looked at disk utilities, S.M.A.R.T looks fine, "verified" and have verified disk, and repaired permissions. In case it is the hard drive, I bought external hard drive and hooked it up to Time Machine. The backing up to a long time, overnight, about 10 hours because it kept freexing up and I would have to shut down and try restarting again. Finally got everything backed up.
    Any help or suggestions greatly appreciated!!!   Could it be my hard drive is dying? Is the the normal chain of events or is it something else???

    Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
    DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

  • My computer is going to sleep and wont wake up by touching keyboard or mouse. I have to use the power button

    Can anybody help? My computer is going to sleep and I cant wake it(bit like a teenager) by using the mouse or keyboard. I have to use the power button. Any ideas?

    Hmm, that support link doesn't like me.
    Do you have the discs that came with the computer? If so, put Install Disc 1 into the combo drive and boot up while holding the C key. Does anything show up on the screen? Do you hear the fan running? When running from a CD or DVD, the fan usually runs at a fairly fast pace and should make some noise.
    Keep in mind that you have a 1-year hardware warranty with any new or refurbished Mac, so if something has gone wrong, you should be able to have it replaced free of charge, unless the MacBook shows some form of damage.
    ~Lyssa

  • RMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

    rMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

    Did you purchase the Mac new?
    You have 14 calendar days from the time your items are delivered to initiate a return as noted here.
    Even though you are past the 14 day limit, if it were me, I'd take the Mac back and explain what's going on. Your Mac should work out of the box.
    message edited by:  cs

  • My Macbook Pro *****! I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button.

    I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button. a 2 week old computer is not supposed to do this! it wastes all its time being so flashy that it just craps out all the time. sometimes i feel like i should have stayed with my virus covered PC. at least when it shut down randomly you could turn it back on, but with the macbook pro, it just keeps restarting itself over and over. need help with this, any answers?

    Here's a novel thought. Take it back to the vendor. Should have done that one week ago.

  • There used to be a preview window in mail where you could read the message in the mail box but now its gone. It just shows me who its from and the date. I now have to click on the message twice to get it to display. How do I get the preview box back?

    There used to be a preview window in mail where you could read the message in the mail box but now its gone. It just shows me who its from and the date. I now have to click on the message twice to get it to display. How do I get the preview box back?

    There is a bug in Mail triggered by receiving a password-protected PDF as an attachment. According to reports, the bug is fixed in OS X 10.8.5.

  • HT201371 does touching the home button wakes up the iPhone 5s or do we physically have to Click on Home Button or Sleep/Wake button and then use touch id?

    does touching the home button wakes up the iphone 5S or do we physically have to Click on Home Button or Sleep/Wake button and then use touch id?
    What I am trying to say is that each time I have to click on the home button to wake up the iphone 5s and then it scans my print and logs me in the phone however I was hoping that by just putting the finger on the button will do the whole thing of waking up + unlocking the phone,
    Can anyone please let me know if I am wrong or if I am right? since I just bought iphone 5s and I am not sure if the sensor is working or not the way it should be.

    It sounds like it is working the way it should be. You do have to click one of the two buttons. The closest thing to doing it as a single operation is to click the Home button but don't remove your finger from the button (i.e., leave your finger lightly on the button immediately after clicking it).

Maybe you are looking for

  • Error while Deploying -- Please help !!!

    Hi, I am getting the following error while deploying. The components that I have is a html, servlet and Stateless session bean, basically I am executing chapter 2 of developing Enterprise applications "A Simple Session Bean". The error is as follows.

  • Add a note to a Calendar event that was created from Mac Mail

    When I create a Calendar event by clicking on a date within a Mac Mail message (you hover over a date in an email it draws a dashed box around the date and gives an option to create a Calendar event).  It creates an Event in my Calendar with the foll

  • Make to order scnario

    Hi gurus, I have a make to order scnario. In this, there is an Production order in which a sales order is given. When i am doing the GR posting of the Production order through MB31 by 101 movement type. the system is throwing the error Valuation cont

  • Reference number in correspondence email

    Hi! How is it possible to include the document reference number in the introductory text of an email correspondence? I have enabled the email function for correspondence using EXIT_RFKORIEX_001 (ZXFKOU01). I have also referred to SAP Note 1360070 - E

  • How to find ANGLE B/W two edges in Oracle Spatial

    How to find ANGLE B/W two edges in Oracle Spatial. I have two edge connected on same node. I wanted to know the angle betwwn them. Can somebody help me out????