My ipod shows the apple logo but wont fully turn on!!
I restored all the factory setting and then my ipod turned of. I then lete it sit for a month and just recently charged it and connected it to the computer. If i hold the power button the Apple logo apears for about 15 seconds and then the screen goes black again. If i plug it into my computer the logo appears and shuts off but it doesnt open up on itunes. How do i get my ipod to turn on?
What happens if you try and connect it to your iTunes in recovery mode and restore it to factory settings? See this article for instructions on getting your iPod into recovery mode. Make sure not to restore from a backup.
http://support.apple.com/kb/ht1808
B-rock
Similar Messages
-
My itouch only shows the apple sign but wont actually turn on, what do i do?
My itouch only shows the apple sign but wont actually turn on, what do i do?
Try here
iOS: Not responding or does not turn on -
my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do
Read
http://support.apple.com/kb/ht1808 -
My ipod is stuck at step 9 in this guide. Itunes told me to keep my ipod connected to itunes, and my Ipod shows the Apple logo as it should (though I can´t see any progress bar). Do anybody know how long step 9 takes. I have turned off my firewall.
Please Help!If it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
If the issue is incurable next time, you have a one-year warranty from the date of purchase. -
My iphone 5c is showing the apple logo and wont turn on at all or shut off
my iPhone 5c is not turning on it shows the apple logo and wont do anything I don't know what to do
Try restoring the phone using Recovery Mode
-
My ipod touch wouln't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and and an empty loading bar. Please help. Thank you.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?
I've got the same problem.
I wanted to download the new itunes version for iphone but it got stuck. I had no choice but disconnecting my iphone. Then I couldn't sync it anymore.
I switched off my phone by holding down the sleep button but it has never successfully switched off. The round thing still turns.
I've tried to connect it back to the itunes. This is the error message I get: itunes can't connect to the iphone. Code 0xE8000065. I tried to find out what error message this is but the apple support site I saw didn't mention this error code.
Can anyone help? Thaaanks! -
accidentally cancelled my 5.1.1 update and now my screen shows the apple logo and then it turns black and then the logo over and over again i cant turn it on fully
Check out this Apple article -> iOS: Unable to update or restore
Can you put the iPhone into recovery mode? Do you see an error number when trying to restore the iPhone? -
so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.
See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
My ipod shows the apple logog no matter what and when i connect it to my computer it doesnt work
Try this http://support.apple.com/kb/TS1538, and if necessary, uninstall and reinstall iTunes. It contains the drivers for the iPhone. If it is necessary to uninstall and reinstall, use this support document and follow the directions closely. http://support.apple.com/kb/HT1923
-
how can i reset my iphone? I chose to reset my settings and all I see now is the apple logo, but does't want to reset.
Try this reset ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, restore the device > iTunes: Restoring iOS software -
I plugged my iPod into my computer to retore it and proceeded to do so as told. The only thing that happened after that was that the Apple logo keeps showing up and nothing else. My computer/iTunes no longer recognizes my iPod either.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
After going through steps to restart my IPad, the Apple logo
Appears on the screen but it will not go back to
the main menu. It just stays on with the Apple logo
showing. The logo will appear and disappear at times but that
Is all it will do. HelpHi Connie2013,
Thanks for visiting Apple Support Communities.
The steps in this article can be helpful in your situation:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy -
After update, Apple TV just shows the Apple Logo, but won't start. up.
I updated my Apple TV 2 today with the new update, it downloaded everything and then installed it. Now it is showing the startup screen (the silver Apple logo) but won't go past that. I tried unplugging it, I tried holding the plat and menu button together to reset it, it still just pops up with the logo and never starts up. I don't know what to do. Any suggestions?
Grab a micro usb cable and restore through iTunes
-
My iphone 4s keeps flashing the apple logo but wont turn on...
I've tried pressing the home button and hold key to restart it, ive tried to plug it in to my mac and restart it but it wont even recognise that its connected...
Just the apple logo flashes and sometimes fades out with a green or blue line through it... What is going on somebody please help me
This is seriously the 4th iphone i've received this year my first one lasted me 2 years!!Do a recovery mode
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Best way to insert 300dpi photo's into Ilustrator file for print
I am creating a 5.5 X 8 postcard style card for print. I need to place 15 photographs that are aprox. 1.5 X 2.5 each. What is the best way to insert these files so that my file doesn't become too large? I will be making a PDF of the final artwork
-
Broken magnetic charger socket, can't charge laptop.
Hi everyone, I've only had my mac for 2 months and already the magnetic charger is broken. I don't know how it happened but it looks like it's been chipped. Is there anyway to fix this DIY style or do I have to take it to a shop? Cheers.
-
TCP/IP communication with remote host
Hey guys,I wrote a class for TCP/IP communication with remote host.I am trying to use this class in following way:Its not working.One thing I am not sure about if I can give IP address of the machine while creating a socket.Please take a look at my p
-
I've had my Creative Zen 8gb for not quite 8 months. A couple of months ago the RW control started doing this very annoying thing where I would be holding down to rewind (I use it for audio books so sometimes I want to go back several minutes), and s
-
J2I9 and J1IH Reversal (Other Adjustment)
Hi , I have made some Transactions thru J1IH (additional excise option) , the record of this posted transaction is being appeared in J2I9 and J1I7. Now I have done a reversal of this Transaction using J1IH (Other Adjustment Option) , but this record