My ipod tell me that has 65 mb memory but when I'm about to sync music it's like there's no memory and don't use that 65mb so I had to delete music... What's wrong?
My ipod tell me that has 65 mb memory but when I'm about to sync music it's like there's no memory and don't use that 65mb so I had to delete music... What's wrong?
65mb is very little space.
It is likely that you were trying to sync more than would fit on the iPod.
Similar Messages
-
I have a windows 8 computer and I installed the newest version of itunes because I used to have an ipod and I have a few purchases that I wanted to listen to. When I try to play them it says it's playing but I can't hear anything. It does not even says it's played the whole way. It just stays at the beginning. It won't let me pause. I checked my computer sound and there is nothing wrong with it. So there must be some software problem but idk what it is. If anyone can help I would appreciated. Thank-you
Hi DJBentley2011,
Welcome to Apple Support Communities.
It sounds like there is an issue burning CD's in iTunes. Is the playback issue only occurring on a specific device and does the disc show up correctly in iTunes? The article linked below should help you resolve optical drive issues, it walks you through identifying potential issues and provides troubleshooting suggestions.
iTunes for Windows: iTunes Diagnostics, CD/DVD Drive Tests
http://support.apple.com/kb/HT1567
I hope this helps.
-Jason -
I try to integrate bookmarks from all my computers running firefox. I'm apparently not allowed to import new bookmarks in addition to the old ones since a warning tells my that already collected bookmarks will be deleted. What to do?
You could export the bookmarks to an HTML file and import that file onto the other computers. Importing HTML files adds the bookmarks to the existing ones. This can result in duplicate bookmarks.
See [[Exporting bookmarks to an HTML file]] and [[Importing Bookmarks from an HTML File]]
If you want to keep the computers in sync, you may want to consider the [https://addons.mozilla.org/en-US/firefox/addon/10868/ Firefox Sync] add-on may be of interest to you. -
my ipod says connect to itunes which i did but when im on it it wont show anyhing
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
I have just bought a new computer and downloaded the latest version of itunes. It has all installed fine, but when I plug my ipod and sync it, the music library shows all the songs and videos that are on there, but won't let me play them. Also, I can't add any new songs to the same library. It saves them elsewhere. I have had the previous version on another computer and it worked just fine. I have been online trying to find an answer but nothing. Hope someone can help me. Thanks
Installing iTunes does not cause content to magically appear on the computer.
Your media is only where you put it.
iOS devices are not backup devices.
Copy the media from the old computer to the new computer. -
It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.
If FaceTime is not hidden by Restrictions (Settings>General<Restrictions) you got duped. iPods officially sold in Dubai and some other countries that prohibit FT do not have FT and there is not way to get FT on those iPods.
-
I am trying to accept the new terms and conditions on itunes but everytime I click agree it makes me do it over and over again and it wont let me buy music what is wrong?
It's happening on all platforms. Must be a server problem on Apple's end.
-
When I charge my IPod Touch and don't use it for 2-3 days, it is dead when I go to use it. What am I doing wrong?
If yo are oly letting the iPod sleep (vice slide to power off) that is normal if wifi and other itesm ae left on when sleep. I would either power the iPod off or at least turn on airplane mode and let it sleep.
-
I have purchases the OS X Mountain Lion on Apr 7 and it keep telling me to download I have gone though this 5 time. That i'm i doing wrong. it say it is installed But when i go to back to where my apps are it say to download and that is the only one that as it on there..Can you help..
The Mt Lion installer deletes itself from your Apps folder when it has finished the installation. It is available to download again should you ever need it, such as to install on one of your other qualifying Macs. You don't have to continue to download it and install, it's installed.
Is there something else going on? -
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
I am having problems gettting my mail to work ... Mac telling me that my start up disk id full and to delete some files to free up space ... have done this but when i open mail from the dock it just brings up the colour wheel and nothing happening ... it shows when you right click on the mail icon that " application not responding"
If your hard drive is getting full, you need to free up, at least, 20 GBs of space on your iMac's hard drive.
If your Mac is running a fairly recent version of OS X, here are some general guidelines.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it run the automatic ans S.M,A.R.T. tests, then go to the cleaning and maintenance tabs and run the tabs that have the ability to clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck! -
my ipod will only charge on the docking station. says it has a full charge but when I take it off the docking station it says battery is low so I've plugged it into the usb and plugged it into my wall outlet but it is still not charging. I'm not sure what generation it is, its an 80GB. Help?
The battery is possibly unable to take as much power as a normal battery. It may need a replacement battery.
-
My daughters ipod touch has entered restore mode, but when I attempt to carry out a restore I get an error code 1604.
Any easy solution to this problem?Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Above from:
http://support.apple.com/kb/TS3694 -
I am trying to add the Youtube widget, but I get a black box saying blocked plugin. I have even tried to embed it from Youtube as well and it does the same thing. But when I drag the Vimeo widget over, it connects like it should. What am I doing wrong and how can I fix this problem?
Make sure that both the web browser you're using and its Flash plug-in are up to date. Google Chrome has its own Flash plug-in it updates on its own. Firefox, IE and other have separate plug-ins.
Maybe you are looking for
-
How do I install iTunes 10.5.3 on Windows Vista?
I've been trying for some time to install iTunes on my computer for some time now. As I'm sure you're aware, the iPod Touch currently requires 10.5.3 in order to operate. Here are the issues I've been having: After the I run the Setup and the iTune
-
Power failure corrupted my Mail program - H E L P !!!
I just went through a power failure. The Mac OS has always survived nicely in the dozens of times I've experienced such things before. However, this time Mail got totally melted. When relaunching the other programs I was running ( Keynote, Pages, Saf
-
Reusing queried data for new insert
I am new to Forms. I have a master/detail block created with the wizard. The master block consists entirely of the primary key. The detail block consists of multiple records that includes a field for the primary key... I am trying to create a new set
-
Hi, I have a form which when the user enters query mode, the user should be able to access the LOV attached to the 3 fields that are on the header level. On selection the values should be populated in the fields. The 3 fields are in a query only bloc
-
Coreapplication_obis1 is not starting up.
./opmnctl status Processes in Instance: instance1 --------------------------------------------------------------+--------- ias-component | process-type | pid | status --------------------------------------------------------------+--------- coreapplic