My ipod was in recovery mode and fixed it. i can use it. but the problem is whenever am i connect it with itunes it says IPOD is in recovery mode even after recover is done. i cant sync ipod rite now. it showing same msg again. nyone knows wat to do plz??
my ipod was in recovery mode and fixed it. i can use it. but the problem is whenever am i connect it with itunes it says IPOD is in recovery mode even after recover is done. i cant sync ipod rite now. it showing same msg again. nyone knows wat to do plz??
I did the restore and it cleared and reset the iPod but after it finished the same error came up. I tried this 3 times. Also it no longer shows up as a drine in My Computer.
if it's relentlessly doing that to you, it's plausible that the message is being caused by a Windows drive letter confusion. (that's consistent with the disappearance for My Computer, too.)
see the following article for troubleshooting information on that possibility:
"iTunes has detected an iPod in recovery mode - Use iTunes to restore"
Similar Messages
-
In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???
Hi lepyykko,
If I understand your question, you are trying to update your iPhone, but you are seeing an error message that iTunes for Windows is not installed, is that right? The first step is to get iTunes successfully installed on your computer. Then backup the iPhone before updating the iOS software.
Are you seeing any error messages when you try to install iTunes for Windows?
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
Are you able to update your iPhone wirelessly?
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
https://support.apple.com/en-us/HT204204
Before you update
Back up your device to iCloud.
Update your device wirelessly
The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
Plug in your device to a power source.
Tap Settings > General > Software Update.
Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/HT201263
I hope this information helps ....
- Judy -
My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%) If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see? There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light. MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014
I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
If "open in low resolution" is unckecked the appearance is good but the very small size.
See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt. -
Hi,i am sorry for my poor English,I dropped my new iPad on the ground and I damaged it,the digitizer is broken and the display is cracked and scratched ,I still can use it but I really want to replayced it ,what can I do in this case and also a new digitizer cost around 300 us,it is almost the half of the price of my iPad ,should I buy I new one,thank you indeed..
Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
I have tried several times to unlock my daughter's ipod touch by following the instructions, but so far I cannot turn the ipod back on. Everytime it seems to be finished updating I unplug it and it again says that the ipod is disabled and gives me the prompt to start again. Can someone help please? Am I doing something wrong?
- Try DFU mode and restore:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next try the manual install as described here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
After yo successfully download the file, plae the iPod in recovery mode and try a restore.
It sounds like the file is not fully downloaded before the recoverymode expires on the iPod. -
When trying to download firefox 3.6.12.dmg to my Mac, OS 10.4, no matter what site I download it from, it will not install. There is always some error message. I'm trying to download it again now, and I know it will be the same thing again and again. Can anyone open a window for me, since the door is constantly being slamed in my face?
ThanksSame proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
My solution; very simply use timemachine to restore the previous Frefox 3.x
worked great in 3 mns -
Don't know what to add. How do I get rid of Get Glue and have Firefox open by itself?
This sounds more like a Windows question, than a Firefox question. When you say that an image shows up every time you open your computer, do you mean every time you turn on your computer, or every time you start Firefox?
-
All other websites appear properly, it is only the google homepage. The top and bottom banners appear with just a white band in teh middle. No widgets (mail, weather, stocks, etc) appear. It is only on one computer running XP. I have 2 other computers running XP and one running Linux and they work and display fine.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
please help
DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps. -
Tried to connect my ipod to TV through USB. Can play music but the TV cant detect video files
Hi. I have an ipod nano 4th generation. I am obsessed with Doctor Who but unfortunately I do not have BBc America. I watch from itunes on my PC. I would like to sync the shows on the ipod and watch on TV. I am aware i can purchase apple's A/V cable, but i have found that my TV also has a USB port. I plugged in my ipod and four menus came up, "video" "pictures" "music" and "settings". I can play music but the Tv wont find the video files on the ipod.
Thanks!!!!iTunes Match on your computer can give you the same higher quality files.
Run iTunes on your computer. Show your music library by Song in list view. Add the columns for Bit Rate, Kind, and iCloud Status to the list view.
Any song that is shown as Matched for iCloud Status, that is NOT already 256 kbps (or higher) for Bit Rate can be downloaded from iCloud at 256 kbps AAC. For example, if you have an old album from a music CD that you ripped years ago at 128 kbps MP3, and it is "matched" by iTunes Match, you can replace the lower quality files you have now with 256 kbps Match AAC audio file (which is shown for Kind).
To do so, select the song, or a set of songs, on the library list. Press Delete. Confirm you want to delete the song (but do NOT check the box to delete song from iCloud) and choose to move song file to the Trash. The songs remain on your iTunes library list, with a "cloud" download button next to the song name.
Click that button to download the song from iCloud. Because the song is Matched, you get the replacement as a 256 kbps AAC audio file, instead of the original 128 kbps MP3 file (or whatever lower quality format it was before).
You can go through your iTunes music library, and replace lower quality Matched songs with higher quality versions, thanks to iTunes Match. -
my ipod is disabled and when i connect it to itunes it says that i have to enter my password but i cant because there is no swipe bar so what do i do to fix this?
Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software. -
"My ipod is displaying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesn't "see" it even if the computer does."
It worked two days ago fine, for two years, until I installed this newest iTunes update, then for one day it kept on freezing and going to apple logo screen mode, then today it only goes to that screen and wont start up at all.
I've tried the hold down two buttons hard reset, that doesn't help. I've tried disc mode... but iTunes doesn't "see" it even if the computer does.
This is a pristine ipod, never exposed to adverse conditions, never dropped, never wet, and it worked perfectly two days ago.
Can I factory reset it somehow? (considering itunes can't "see" it)
[Ipod classic 160gb less than two years old.]Looks like I might have found the solution on a youtube comment:
R.O:
"Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure. -
I have an old ipod (5th gen) and I downloaded itunes to my toshiba computer. It says my ipod was formatted by mcintosh and must be restored before i can use on windows. is there a way to transfer my music? ty
Not without installing additional software on your computer. The problem is that your Windows PC cannot read the Mac's disk format. If the iPod was previously used on a Mac, its storage uses the Mac's disk format. The Restore process reformats the iPod's disk for use with Windows, but this erases its current content.
There are third-party products that allow Windows to read the Mac's disk format. For example
http://www.mediafour.com/products/macdrive
However, even if your computer is able to read the Mac's disk format, iTunes cannot be used to transfer song files from iPod to computer (except for songs purchased from the iTunes Store). But there are third-party methods and utilities that can transfer from iPod to computer. If you do an Internet search on something like "ipod transfer," you should get some links.
So, you may be able to do it by first making the iPod's disk readable on a Windows PC, and then using a method (that is not iTunes) to transfer its song files to your computer's drive. After the song files are on your computer, you can add them to the iTunes library.
Maybe you are looking for
-
How do I transfer my data from my old iMac(05) to the new iMac(12)?
I bought a new iMac and went through the setup process, however I did not have the ability to transfer my data from my old iMac to the new one because I didn't have a cable. I have new iPhones, iPods and Apps that need transfering. Can someone prov
-
Viewer Crosstab Excel Export - Limit to Static Worksheet
I'd like to know if it's possible to limit the export of a crosstab worksheet to excel to just a static worksheet (eg. Crosstab_Static excel worksheet ). In advance, thanks for your assistance.
-
Temporary variables in business rule in essbase
hi, I want to add temporary variable in my business rule. I have declared the variable as below: VAR TaxRate; "ROA Tax Rate" TaxRate = "ROA Tax Rate"->"GLBU_CVD CONSOLIDATED"->"OU_NUTRITIONAL CHEM"->"All DEPTS"->"Working"->"Forecast"->&FcstYear->"USD
-
Photoshop CS5: Can't drag or move anything with the mouse
I'm having a very strange issue with Photoshop CS5 (both 32-bit and 64-bit) When I go to draw anything or move anything, the canvas does not respond to mouse events at all. Right clicking doesn't work, dragging edges of the free transform box doesn'
-
Problems with the latest MAC wireless key Board board
I recently purchased the most recent wireless MAC keyboard and it worked great for a whle and now I am having problems. The ALT key will not give me the @ symbol have to get it from the special characters menu, instead I get ™, have tried new batteri