My ipod works fine with some headphones but when I put others in it plays for about 20 seconds than fades and shuts off?

I can use one of my skullcandys but when i try to use the other pair it works for about 20 or so seconds before it will fade away

Make sure the plug is pressed in all the way. The fit seems to be different for different brands, so with some headphones, it takes more pressure to insert the plug completely (including Apple's recent EarPods). If the plug is not completely inserted, you may hear something, but the shuffle does not "see" the headphone so stops playing after a short period.

Similar Messages

TS3186 My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! Th

My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony

1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422]

My iPad is set up for my Apple ID account and works fine with iTunes. But when I try to use it for the App Store, my wife's apple ID shows up, not mine.

My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?

Sign her out and sign yourself in!

I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"

I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"

COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"

Toshiba HD worked fine with 2008 MBPro, but when I try to use with new MBAir, it says "read only" - how can I fix?

I have a Toshiba external HD that I used with my old 2008 MBPro with no issues. I just got a new MBAir, and when I try to use the same Toshiba HD it will not allow me to write to the drive. The drive mounts and I can open files from it, but when I look at the info under Sharing & Permissions it says "You can only read." I'm not able to Verify it in Disk Utility either, as when I open it there all the Verify buttons are greyed out.
I also noticed the drive format says Windows NTSF, which I don't understand since I was using it with a Mac before and have never used it with a PC. Do I have to reformat it to write to it from my MBAir? I have files on there that I don't want to lose, and the only PC I have available to me is at work.

http://support.apple.com/kb/ht1274

My wife and I recently started sharing the same iMac computer. I was already on it with my 4s and iPad 2 but we both recently switched to iPhone 5. hers works fine with the iMac but when I plug in iTunes freezes why?

It will not let my iPad Mini plug in I think it has somthing to do with us have 2 Apple ID's running on the same computer. Anyone have any advice or know what the real problem is?

Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac" maybe thats why nobody answered you.
It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well. I prefer to keep things simple, but...........you and yours, I dont know.......
http://support.apple.com/kb/PH11468

Quicktime working fine with my itunes but when i go to use with a sumatra pdf file on a web site nothing appears wont work. any ideas to what is wrong

I have win 7 64 bit. the program i am trying to use is an instruction program that should automatically go to the web page from the document to a vinstruction video. it will go to the page but no video

Are you sure that the video is in a format QuickTime can handle? Can you post the URL to the web site containing the video so that we can try it out ourselves?
Regards.

I am trying to connect to my Wifi Network. It is a Galaxy Nexus. I am trying to connect to this Hotspot. I have an iMac that works fine with my network but for some reason with this computer I cannot connect.

So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!

12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411

Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

Found these instructions here:
https://discussions.apple.com/message/15388885#15388885
I found an answer that worked for me. I am using an iMac.
(1) Sign out of the iTunes store
(2) Open a NEW account with a new Apple ID
(3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
(4) Go to RECOMENDATIONS & PING POSTING
(5) Turn on Genius there
Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
Worked for me.

Hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the networks erased my safari history . and it still has not read my wireless internet ?

hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the networks erased my safari history . and it still has not read my wireless internet ?

If not:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

Is there a way to print from ipad 4 to a non AirPrint printer? I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer. Is there an app for this or adaptors which could work? thank, Ric

Is there a way to print from ipad 4 to a non AirPrint printer?
I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
Is there an app for this or adaptors which could work?
Thank, Ric

Printopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
Canon Easy-PhotoPrint
Canon Mobile Printing
PIXMA Printing Solutions

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

Screen shot VI works fine with Labview 9 but crushes with Labview 10

Hi everyone,
I am using Labview 10 with XP.
The screen shot VI (available in the .zip in this discussion http://forums.ni.com/t5/LabVIEW/Can-i-make-an-automatic-Print-screen-in-labview/td-p/534790/page/2?q... works fine with Labview 9 but makes Labview 10 crush every time (same computer) .
Any solution to make it work with Labview 10?
Thanks,
User
Solved!
Go to Solution.

Hi,
Thanks for posting on NI forum.
You could find a response at the end of the same link you had post (page 4).
http://forums.ni.com/t5/LabVIEW/Can-i-make-an-automatic-Print-screen-in-labview/td-p/534790/page/4?q...
Regards,
Nicolas M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Journées Techniques LabVIEW 2012 : du 27 septembre au 22 novembre
2 sessions en parallèle : Débuter a...

My ipod works fine with some headphones but when I put others in it plays for about 20 seconds than fades and shuts off?

Similar Messages

Maybe you are looking for